📡 Elevate your 4G LTE game—never miss a beat, anywhere, anytime!
The Bingfu 4G LTE SMA Antenna 9dBi (2-Pack) delivers powerful omni-directional signal gain across multiple frequency bands (698-2700 MHz), compatible with major US carriers and a wide range of devices from mobile routers to outdoor security cameras. Featuring easy SMA male connectors and a dual-pack design, it’s engineered for professionals demanding reliable, high-performance cellular connectivity in diverse environments.
Item Weight | 65 Grams |
Connector Type Used on Cable | SMA Male Connector |
Frequency Bands Supported | 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz |
Range | 2700 MHz |
Compatible Devices | 4G LTE mobile routers, broadband modem hotspots, CPE cellular gateways, trail cameras, game outdoor security surveillance vehicle trackers, real-time monitors, car DVR video recorders, industrial IoT M2M RTU DTU terminals, embedded modules, remote metering and SMS alarm systems, SCADA DAQ relay gate opener switches, vending machines, digital signage, delivery lockers, temperature humidity sensor monitoring GSM wireless motion detector alerts |
Additional Features | 2-Pack |
Color | 2-Pack Panel Antenna |
J**R
US Cellular D-Link Home Phone Results
I purchased these for a relative's US Cellular home phone device (D-Link DWR-920V), who was having poor cell reception and inconsistent call quality. I was hoping to see a little improvement in reception using these and avoid running new wire (changing the device location).Pros:- The hook-up was easy ...just remove original antennas, screw on new ones.- Fit was good. Build quality appears good- They are larger & more robust than the original D-Link antennas.- Price was reasonable- Shipping was quickCons:- They didn't seem to improve reception at all over the smaller original antennas, despite orientation or direction. We were getting 2-bars of reception and I was hoping to get 3, or at least more reliable phone capability. Didn't seem to make a difference. We moved the unit around and could not see an improvement using these. Maybe there are others out there which would work better?? So we stuck with the originals.Ultimately the solution was to move the D-link receiver to a new location at the upstairs window more in the line-of-sight to the direction of the tower (a few miles away). That got us a consistent 3-bars and sometimes 4 with the original antennas. And consistent telephone service. It required running more wire to the phone, but that has been the best solution. I'm going to keep the antennas for another possible future application. Cheers!Hope this helps.
S**E
Excellent purchase!!
I have an Earthlink modem that was broadcasting a weak signal that my home security camera. I bought these antennas and immediately my camera worked. Absolutely recommended for this type of home modem weak signal issues.
D**S
Bien
Funciona para lo que necesitaba
R**K
Works well
Once I installed this Bingfu Antenna onto my Orbi Cellular router at our camp ground it increase upload and download speeds well enough to allow multiple devices to be connected and allow streaming that wasn't previously working without the Antenna. Please make sure to use this antenna for the 4G LTE connection on your Orbi or you will not receive the positive results you desire. (personal experience!) I recommend this Bingfu 4G LTE Antenna to anyone wanting to improve download/upload speeds with your cellular 4G router
G**S
OK, but your mileage may vary
For my application using a Victron Energy GL520 I did not notice any improvement in the LTE signal and in fact it was worse. So it could be a mismatch or these just don't perform. They were too cheap for me to return so I may use them on an internal router.
R**E
Fixed our home phone via cellular problem
We live in a rural area where I couldn't get a landline telephone until a few years ago. We are also on the fringe of most cellular service while in the house. AT&T's solution was wireless home phone service, which converts cellular service into dial-tone based landline service compatible with typical home phones, answering machines, etc. Problem was, I was getting 1 to 2 bars of signal (on good days) on the device, even when mounted high on the ceiling. Home phone service was flaky - and we never knew when it was out until someone texted our mobile phones to tell us. AT&T shipped me a different model unit having 2 (instead of just 1) short stubby antenna, but it was no better. I found these antennas with the correct connectors and decided to try them. I now get 4 to 5 bars of signal and stable home telephone service.
J**R
Imitation Garbage!
When in connected these antennas my router went offline and wouldn't connect to any LTE bands. Remove them and return to factory antennas and the router connects. Avoid these knock off antennas that will degrade your connection
X**M
Improved signal strength; not bear proof
I have a trail camera location that we would either: do not get any pictures from using a Moultrie edge, or it would take hours or even days to get images from a covert WV20V. With the factory covert antenna the display was none - 1 bar of signal. Once we installed this antenna full strength. Averaging 3 minute uploads after capturing the picture. I attached 2 X-ray pictures of the factory Covert antenna, and the Bingfu. You can clearly see the difference in the internals.Bad: a bear tore the first one off my camera, and he may have destroyed my second one this morning (9/15/23) Just ordered two more. Maybe add a bitterant coating to make them lest tasty for critters. J/KWe're also about to try them with a Muddy Camera in the same location, once we receive them.
Trustpilot
1 day ago
1 month ago