RobertshawProduct 41-204

From Robert Shaw, but the same exact markings as the original (CoorsTek). This was on my Culinarian, but the Precision should be the same as only the cook top is different. Do not pay over $200 for the SAME EXACT part from Capital. The small oven uses this same igniter. For the broiler search "ROBERTSHAW 501A Hot Surface Oven Igniter" as it has been verified as correct.For troubleshooting purposes my symptom was that all of a sudden the oven would not heat above about 200*. Resistance in the element had changed enough that there was not enough current to fully open the safety valve. Oven would light, but there was only a low flame. Once swapped out the flame came on and had the correct sound, flame was measurable higher and more energetic. As a side note, be sure to turn off the electricity as the wiring for the igniter does carry 120v. If the control knob was accidentally hit then the wire would energize.

Perfect fit, great quality, and easy to install. This item appears to be identical to the OEM item I replaced on my 20 year old Viking VGIC305-4BSS.

DCS. RGT364 igniter. This Robert Shaw igniter is working flawlessly and is the exact same size and fit as the original DCS igniterMy oven heats up like new and no more long heat up times or gas smell or fluttering

Installed at Christmas, removed at Easter. Removed with a reading of 3.1AMPS not enough to keep valve open. 3.2 to 3.6 is the spec.they worked but just not for long in our Viking Range. It was a shot, bought the spiral type which are reading 3.6 A on the dot.

Igniter worked perfectly on my Viking gas range. Received 1 broken on from supplier and they shipped out replacement within a couple days. Great service

This ignitor was almost and exact fit (1/4" longer) fit to my original oven ignitor on my Blue Star modelRCS 355-BV2. It took me a while on the Robertshaw website to find the correct size ignitor to fit. This unit is 4-1/2" and my original was 4-1/4". I bought mine on a different site as it wasn't available at the time of purchase here on Amazon but one heck of a lot cheaper than form the Blue Star site. It took about 30 minutes to replace plus a lot of overdue grease cleaning.

These Robertshaw 41-204s are a perfect replacement for the PB040001 igniters in my 1997 Viking Professional oven, at a much lower price! They are flat blade and 3.2-3.6 amps with long thermal wiring leads and ceramic wire nuts (no plastic connectors).

This ignitor fits and works in the oven of a Capital Cullinerian. Much cheaper than a OEM ignitor at over $200.Only thing needed was to crimp on the blade connectors so it can connect to the stoves internal power lines.Update: less than 2 years after installing it already died. So it looks like longevity is an issue.

cette pièce a réglé le problème d'allumage trop long.