Musiclily Pro 6-in-line 2-Pin Guitar Tuners Machine Heads 15:1 Ratio Tuning P...

Fits perfectly into my squier affinity strat from like 2010/2011. Awesome.

I needed to revamp an old guitar and these tuning pegs were a near-perfect match. Quality-wise they are excellent; good weight, solid-feeling action, attractive appearance. But the inserts on the bottom of the tuning heads consist of two pins, not a single one, like the old heads. I knew this when buying them and figured I could modify the headstock, which is what I did. You can see in my images the old type compared to the new for a clear picture of what I'm talking about. These pins slide into small holes in the wood of the guitar head for additional stability. You can see the single inner hole versus the two outer pins. What I ultimately did was simply drill two additional holes per tuning peg into the headstock on either side of the original hole (green arrows in image). To get the placement of the new holes right, you can put the tuning peg in place and firmly press down it, which will allow the pins to make indentations where the holes need to be drilled (also visible in one of the images). This process is very simple if you're handy with power tools; just make sure you use the correctly sized drill bit, and that you're careful not to drill too deep into the wood. The extra hole in the middle will not affect anything and will be covered up by the tuning peg. One last tip. Some people complained about imperfections in the chrome finish, but there are actually little clear stickers on each individual head to protect them (see last image). Remember to remove these little stickers once you're done installing everything, and you should be good to go. Good luck!

These were great unfortunately I had to return them because they were the wrong size but that was my fault

Searched high and low on Amazon for a drop in replacement for the tuners on my Squier Contemporary Strat. These are the two pin, no screw kind. The pins on the Musiclily locking tuners didn't fit. They were close, too close to the old ones to drill new holes. But THESE were a perfect fit. I had one of the new affinity squiers: these tuners would fit those as well. These aren't perfect by any means. I prefer split shaft tuners to these, but I wanted the chrome, not the black ones that came on the contemporary strat. A little slippage at first, but that's to be expected. Now that everything's all tuned up-- they feel great. I'd say these are a step up from the tuners that come on bullet squiers, and on par with the squier affinity tuners. So if you're looking to change the color of your tuners and want an easy drop in replacement, these are good. Also, Musiclily was super easy and accommodating with all the returns I did.

These are a perfect for drop in replacement for late 2000s 2 pin Squier Stratocaster (Indonesia Cort) tuning machines. This were used as an inexpensive repair on damaged stock tuners. I can’t comment on the tuning stability, but they fit and have held tune for the purposes of repair and seem to be on par with stock. If you don’t need locking tuners, and are looking to replace worn out stock tuners - these do the job.

Works and fit great 👍

My tuners arrived in perfect shape. They are 2 pin tuners. My Squier tele was 1 pin setup. I didn’t know this before I ordered. I was able to make the necessary modifications without problems. I’m very satisfied with the new tuners. The stock ones had gotten notchy. These are very smooth. If you don’t want to modify your guitar it’s easy to check to see what you have before ordering. Update: After months of use these tuners have gotten better. They are now extremely precise and rock solid. Good looks too.

I couldn't really find any other product here, on Guitar Center, or on Reverb that would fit my guitar, except for this listing by Musiclily. I had actually purchased Wilkinson tuners by mistake that I repurposed for another guitar, after reading reviews/answers that said "yes this fits Squier Strats :)" and then finding out I'd have to drill holes for that to be a correct answer. So, if you have an '00s Squier Affinity Strat, this is basically the ONLY machine head available to you. It fits perfectly, no need to drill (although they included extra screws for no reason), and it holds its tune as well as the headstock design allows it to. The gear turning is about equal to the stock tuners - as it ages, it'll probably get worse. But hey, this is a minimal investment to keep your minimal investment guitar playing well. I wasn't expecting a Graph-Tech or Hipshot-level machine head, but these will do their job. Excuse the string wraps, I'm still working on my restringing skills.

Le ho montate su una Yamaha erg121 e sono assolutamente perfette, quasi indistinguibili dalle originali. Ottima sia la qualità che l'estetica. Queste meccaniche con i due pin invece della vite per bloccarle alla paletta, sono praticamente introvabili nei negozi fisici. Stranamente nella confezione arrivano ci sono pure le sei viti per la versione senza pin. In più nella confezione ho trovato pure un plettro, niente di ché ma è sempre un di più. Peraltro, non usando la chitarra da parecchio tempo non sapevo se e dove avessi qualche plettro e quindi è stato molto gradito.

One of the bushings was only painted with undercoat and not finished with gloss black top coat like the others 5 were. Very annoying. Have had to order a set of bushings at my own cost from another seller now as this seller isn't responding to my message. Very poor quality control but what can you expect from China?

Passade utan problem i min squier sonic, bara att byta. Minst lika bra kvalitet som de som satt där från fabrik. Känns solida, mycket lite spel och fladder.

Perfect fit. Installed easily. The tuners seem to be of good quality

Used these on my old squier strat. They look and feel nice, have no issues with usability. I am hoping they will last some years.