Pipe Clamps NPS 2 Inches （Φ60MM）- 304 Stainless Steel & Rubber Lining 10 Pack

Worked perfectly for mounting my torches on my fence !

Nice

These rubber lined pipe clamps are overall pretty nice. I like the rubber lining to the metal, I'm using these to hold some insulated line sets up as I'm running them inside my walls. They do a good job holding, though the metal is a little thin and very bendable. The bendable metal does come in handy if you need to move the clamp into a non-standard place, and also lets you shorten the clamp, just drill through the middle to make a new hole and the clamp tighter. I like that these do come with screws and a bit as well.

Little pricey for 10 clamps but made well

I bought these to fasten an assembly made from 1.5" PVC pipe which supports a weather station to the framework of a raised vegetable bed. The assembly weighs about 20 pounds, and, because of its shape, exerts a fair amount of torque on the mounts. I abandoned my initial setup for reasons unconnected with these clamps - I found that I would need to be able to install guy ropes to stop the PVC pipe from excessive flexing - but the clamps were flexing and deforming under the load to an extent that would have been a significant problem even if the flexibility of the PVC pipe had not been an issue. I found that by using a pair of clamps together at each mounting point, with the rubber lining removed from the top one, I was able to mount my assembly reasonably securely. These clamps would almost certainly be suitable for use in more conventional situations where the pipe being mounted is not subjected to external forces, but they are made of fairly thin metal and do not cope well with even moderate stress.

Good product. Made well.

These dust collection pipe clamps are good quality, thick, and durable. They're the correct size and functional. They're very easy to install and are a great value.

Why did you pick this product vs others?:The product description says 3/4". These are sized more for 1". Other than that, I'm happy with them. They come with a bunch of self tapping screws. They worked great, I just drove them into some support beams and done. About half of these clamps are now doing a fine job of holding some 3/4" pex. The pex can slide through the clamps because the clamps are kinda large for the tubing. That actually made the install easier.Anyways, good clamps. They work and come with the screws need for using them.