Rotating Christmas Tree Stand for Artificial Trees, 360-Degree Adjustable Tree Stand Base for Up to 9FT & 120lb Pre-lit Tree with Remote Control, 4 Built-in Electrical Outlets Revolving Tree Holder

Good quality, fits our 9’ tree and still spins nicely. Good price point, ones other places are way more sexy.

The media could not be loaded. UPDATE 12/20/2024No longer getting any power to the base. The green indicator light does not come ON. Was working fine when it was turned off yesterday. Appears that switch in the cord or the cord connection has failed. Very disappointed. Didn't even make it though Christmas. Direct connected the tree lights to the plug strip outlet that the tree rotator was using and they are all still fine.UPDATE 12/16/2024We have a heavy (100 lb(?)) 7 ft tree with a center post of approximately 1 inch in diameter.If you plan to use a heavy tree, understand that it MUST be very well balanced from side to side.While the smaller adapter does tighten around the post/tree base, there is considerable play and tree develops a slight tilt from time to time. I don't have this issue with other tree bases, so appears to be an issue with the way this design clamps the top part securely, but not the bottom end of the post.The torque developed to rotate the tree is very low and motor stalls if a tree limb touches your pants leg, even though you didn't feel it.Our tree is also over 5 years old and LED trees weren't in good supply back then... so a few sections of the lights no longer work. No big deal except plugging another string into this base is a real challenge. After the lower limbs have been installed, I can barely even reach the base and the rotating outlets are NOT visible if you are laying under the tree.Rotation control is iffy at best. Sometimes the rotations starts and sometimes it doesn't. Doesn't appear to matter whether the manual button on the base is being used or the remote control. So far, it has always started after a few (2-3) tries. Also take 4-5 attempts to get rotation reversed.The range of the remote control is only 3-4 ft. Better than crawling under the tree, but a control button next to the ON/OFF switch button on the cord would also have worked about as wellSince the motor stalls easily, I would never leave this product operating/powered without direct supervision. There is no visual feedback that the motor is stalled in a rotational mode vs just being in non rotational mode (stopped). The only indicator light is green and stays green whenever the unit is powered.Others have noted some issues with the power flickering as the tree rotates. I still have NOT had this issue and all lights are steady. Also, the lights ON/OFF button on the remote always seems to work correctly the first try.ORIGINALEasy to assemble and disassemble.All parts fit easily back in the box for compact storage.Sturdy as any tree stand that I've used.Nice slow rotation. (With rotation OFF switch).The 4 outlets are more than enough for my tree that has a distribution cord that runs up the tree anyway.Did not try the remote.

I bought this as a tree stand for tree in my office. It's an easy assembly and works great so far. I assembled it, put up the tree - I have ornaments on just about every branch of a 6' tree and had it running for 6 hours today with no issues.Be sure you measure your tree - I didn't and the rod for my tree was a little small so I needed to print a spacer.

The idea of a rotating stand is great, but this one has its issues. It does rotate, but it feels a bit wobbly once the tree is fully decorated, which is nerve-wracking. The cord placement is awkward and gets in the way, making it less practical than I hoped. It’s also not as quiet as I expected, so it can be distracting. It has potential, but I wouldn’t recommend it unless these problems get fixed.

I am not new to rotating Christmas tree stands. I've had them my whole life. I had a 9-ft tree that I wanted to buy a stand for and I've searched years for a stand that would work and this one said it would work. It's matching every single thing that I needed but I even bought a smaller tree for it this year. I had it up 2 days. 2 days the first day it's catching whenever it's turning and making noise so I'm like I'm just not going to use it. I'm going to just use it for the plugs today. It fell over breaking generations worth of ornaments that cannot be replaced. This is awful. It should never be on this site. But that's the problem. Anybody can sell whatever they want here. There's no gatekeeping there is nobody keeping them accountable. Do not get this from someone who's experienced with these type of things.

The media could not be loaded. If you adjust the tree before using, it will work right. Clicking noise here and there though if you don't. Remote works very well. Speed is ok.

Got this because my old one died after 10plus years of use. This stand is not very steady, the legs fall off when you try to move it. It is hard to get it to where it is steady enough to turn. With a lot of fuss we finally got it going and everything is fine now. My old one was so much easier, you simply set it up and it worked with no fuss. I think the unsteady legs are the issue with this particular brand.

No matter which size we use with our 9’ tree, it won’t stand straight and groans as it rotates. Its remote frequency also interferes with our tree illuminator from Hallmark.