HILLPORT Hex Six Monitor Desk Mount Arm, 6 Screen Fully Adjustable Bracket Stand Fits Screens up to 32 inch, 19.8 lbs Weight Capacity per Screen, Black HLX35JX-6P

Up to 32" means <32" I guess. Bought this to setup my desk after getting 2 additional 32" monitors. I have 2 27" in the middle bracket. But when I tried to put the 32" on either side the arms bow like crazy and won't stay in place with the screws at each joint tighted down.

This would probably be a 5-star review except that the product is missing 3 vital screws and HILLPORT's contact information is nowhere to be found. The three screws that connect the pole to the base arms are missing entirely and instead there's mystery hardware in the form of 4 black threaded rods with nuts that don't seem to go anywhere or have any reference in the manual. Seller, please contact me? UPDATE: Seller contacted me and we arranged a delivery of replacement screws! Thanks for following through

Very bad quality does not handle the weight of the screens, shaking all over the place and not aligned quite disappointed had to put it on the table to support the screen weight she can stay in a place

Everything is nuts and bolts, and the only articulation are the X and Z axis, no minor adjustments for the hieght once the arms are secured to the pole. It relies upon compression grip to keep the arms supported (seriously??). Need to re-adjust? You have to take all of the monitors off, loosen the compression fittings, slide it up or down, re-tighten, then remount the monitors, hoping you got the distance right. Because of the lack of Y axis adjustment, you cannot have any monitors in a portrait configuration. Any size difference in the monitors (differences in brand and relative vertical positioning), well too bad, because you're stuck with how it is. Then there's the weight rating. Just having the bottom three monitors causes the center pole to tilt, which causes all monitors to swing forward. Adding the upper monitors made it worse. The fact that the hinging of the mount just makes it worse as they won't stay in place, but go where gravity demands. The pole is mounted soundly, it literally bends. This made for six same brand/model monitors only. Good luck.

Absolutely disappointed! Installed as directed, but the monitors will not stay in place. Looks good in the video but miserable to try to work with! The 'flex joints' have no resistance to movement and there's no way to hold things in position. This is the first negative review I've ever written, but if I can save someone from making the mistake I did and buying one I feel duty bound..

Barley holds 32 monitors, there is a 4 to 6 inch sag from the middle monitor to the outers. There is no way to aling all 3 monitors across at an equal level. Took forever to wire neatly and get setup for me to have to take it all back down. Not recommended

Instructions are incredibly unclear, and it doesn't come with all the parts. Going straight to the dumspter.

They send you a million pieces to put together for the monitor stand without any instructions or owner’s manual! Have to figure out the assembly on your own