NZXT H5 Flow 2024 - Compact ATX Mid-Tower PC Gaming Case - High Airflow - 2 x 120mm Fans Included - 360mm Front & 240mm Top Radiator Support - Cable Management System - Tempered Glass - White

The NZXT H6 Flow is a sleek and functional mid-tower case designed with excellent airflow in mind. Its mesh front panel allows for optimal ventilation, ensuring your components stay cool even under load. The clean, minimalist aesthetic fits well in any build, and the spacious interior accommodates high-end GPUs and custom cooling setups. Cable management options are plentiful, making for a tidy build. While it's a bit larger than some other mid-tower cases, its performance and design justify the size. Overall, it's a great choice for users prioritizing airflow and aesthetics.

I've had this case for about 9 months, got it for an entirely fresh build. I have multiple great things to say, and one complaint. Here's the synopsis:- cooling so good you wouldn't believe it until you have it.- spacious.- no annoying software.- looks great.- tough assemble.Ignore the finger prints in the photo, I refuse to peel off plastic protectors until they're falling off.Cooling. I mostly got this case for looks and price. However, I found out recently that apparently my CPU basically requires liquid cooling. Not with this case, it doesn't. My temps are always cool, everywhere. On that note, I also have an unreasonably large CPU cooler that fits very nicely in there.Looks. It's held up very nicely, no scratches or issues, even after a move. Lights do their own thing, not annoyingly bright, I'm not super invested in that aspect personally. Easily to clean and keep looking nice. All the matierals feel very sturdy, and are very sturdy.Complaint. When I put this thing together I wanted to pull my hair out. It was really frustrating. There are not indicators on the fan directions. They really, really, really need some videos and extra material to help along the process. Very very small thing, the bottom fan needs one of those magnetic wire covers. I lost two screws during the build to that area.

The NEXT H5 Flow delivers excellent cooling, sleek aesthetics, and easy installation. Its perforated front panel and built-in 120mm fan optimize airflow, keeping temps low. The spacious interior, great cable management, and tool-less design make building effortless. While more pre-installed fans would be nice, this case offers top-tier performance and value. Highly recommended!

I've been using NZXT cases for decades, so I know my way around a good and bad case, and when I say this is hands down the best designed NZXT case I've ever built out of, I'm not giving it that title lightly.Pros:Excellent airflow with easily removable air filters360mm AIO water cooling capable (custom water cooling too if you get creative)Enough intake fans to keep high-end gaming rigs nice and chilly2 sided glass makes any build inside it look amazingVery good options for cable routingOne screw removal for front glass panelVertical GPU mount capableCons:I really would've liked to see some more front I/O but that's something NZXT has never been great with. If you care about having accessible ports, look for other cases. The USB-C port is also type 3.1 so if you don't have a modern motherboard you won't be able to use some of the ports.Bloody massive! If you plan on using this to make a desk PC like I did, be prepared to lose about 1-2 feet of your desk! And make sure it's nice and strong because once this PC case is built out as a finished PC it's not light either.Honestly, I'm just surprised they are able to sell such a nice case for so cheap. Buy this while they are still making them!

First of all, this is a beautiful case. Nice, simple, clean and easy to build in. I have a RX 7800 XT (Reference Card) along with a Ryzen 7 7700X and 32GB DDR5 RAM. There are also 8 fans and an NZXT Elite 2024 CPU cooler. It easily fits everything I wanted in my PC.The issue (for me) in the beginning was that it specifies it only supports one 3.5 inch hard drive and two 2.5 inch hard drives. I had two 3.5's I wanted to put in there so I didn't let this "limitation" stop me. What I did was buy the "Sedna - 2.5" / 3.5" Hard Disk Rubber Stand (3 pcs Pack)". That's what you see holding the two drives together. In one of the pics you can see the drives in the bottom of my case.You just need to remove the drive cage that comes preinstalled. It's a tight fit but it obviously works. All drives recognized in Windows and the back of the case closes no problem. You can only fit two 3.5 inch drives though in the bottom. I also have a 4TB NVME drive as the main drive installed on my motherboard.All in all, this is the best case I've ever owned and the temps are nice and chilly. Even gaming the temps easily stay under control. If you have a bigger GPU, it supports graphics cards as large as 410 mm.That's easily some of the biggest GPU's currently out there. It'll be a tight fit but it'll work.Recommended.

This case looks so nice, plenty of spots to tie down cables, plenty of air flow, the thick glass pains are pretty non existent as they are completely see through. Sometimes I reach to touch the AIO forgetting there is glass. There is so much space for liquid cooling in this thing and can fit an ok amount of fans. The spots for where the wires poke out into the case to connect to the motherboard is so well placed. However, the reason I did not give this a 5 star is because there is no grommets to cover the wires and also the the front fan spot, my AIO wouldn’t fit, like not even close, so if you want one there make sure it is a really slim AIO. I wouldn’t suggest putting a 2 fan radiator at the bottom as it may interfere with the front panel connector and other devices or peripherals plugged into the motherboard. Another thing they don’t tell you with the NZXT F120 RGB fans they provide you with is that, you need the NZXT fan controller specifically to power and control all the fans in the case. Overall great case, $100 is what I got if for and it was well spent!