





🔗 Power your eBike upgrade with confidence and style!
The Y-Split Verlngerungskabel is a high-quality, waterproof Y-splitter cable designed for electric bike conversion kits. Available in 2 to 5 pin variants and two lengths (7" and 24"), it supports 36V to 48V systems up to 1000W. Ideal for extending connections to lights, brakes, gear sensors, and throttles, it ensures a secure, weatherproof link with a 2-year warranty, making it a must-have for professional-grade eBike customization.














| ASIN | B0CR3RJC2R |
| Best Sellers Rank | #165,397 in Sporting Goods ( See Top 100 in Sporting Goods ) #94 in Bike Cables |
| Brand | baluoqi |
| Brand Name | baluoqi |
| Cable Type | eBike Cable (4pin Julet Type) |
| Cable type | eBike Cable (4pin Julet Type) |
| Color | 4-pin connector (2 intermediate to 1 intermediate) |
| Compatible Devices | Battery, Brake Sensors, Brakes, Gear Sensor, Light, Throttle |
| Compatible Phone Models | No Compatible Phone Models |
| Compatible devices | Battery, Brake Sensors, Brakes, Gear Sensor, Light, Throttle |
| Compatible phone models | No Compatible Phone Models |
| Connector Gender | Male-to-Female |
| Connector Type | 4 Pin Julet, 3 Pin Xlr |
| Connector type | 4 Pin Julet, 3 Pin Xlr |
| Customer Reviews | 4.5 out of 5 stars 110 Reviews |
| Indoor Outdoor Usage | Outdoor |
| Item Type Name | Cavo di estensione Y-1T2 |
| Manufacturer | baluoqi |
| Maximum Voltage | 48 Volts (DC) |
| Model | Y-1T2 extension Wire |
| Model Name | Y-1t2 Wire 4pin Short |
| Number of Pins | 4 |
| Other Special Features of the Product | Waterproof, Y-splitter Design |
| Recommended Uses For Product | Electric Bicycle Conversion Kit Wiring |
| Special features | Waterproof, Y-splitter Design |
| Unit Count | 1 Count |
E**R
Works perfectly, quality wire but didn't help my project with ebikes light for turn signals.
Gotten this to split into the ebike signal&power wire for the rear light panel. Matched the ebike's head central controller connector perfectly, it is snug waterproof connection and even color coding is matching. Wanted to wire one of the split ends to front turn signal&voltage cables while the other end connects to rears. Never worked, even though I made sure and measured voltage that was going to the rear light panel and measured 12V which is also what the front sequential led signals take. There was flashing, always on right signal all the while rear ones worked normally, but in certain polarity exchange ebike head unit even threw some error code, E23 if I remember correctly. Perhaps I need specific electronic bridge or step up step down modules? Iiii dooont knoooow. But if you do please help what could do the trick as I'm desperately trying to get front turn signals working. Nice item regardless, and thankful there is supplier with this type of stuff. Rare yet cheap, thankfully quality is there as well.
D**N
Perfect
100 % working!
M**T
No problem all connections good
Useful For Upgrading Ebike, used to split display julett connection and fit voltmeter using a 5 pin male julett fly lead and solder voltmeter wires to appropriate wires, in my case everything connected through the splitter is working correctly.
N**C
Cable para luces de freno bici/patinete
Cable con clavijas de 2 conectores. Funciona perfectamente
N**S
Used to activate brake light on motorized bike.
I used this with 5 pin relay to activate brake light when brake lever applied on 4 stroke motorized bike. Worked as anticipated. 5 pin relay, yellow wire constant for running tail light, when relay triggered, blue wire to led flasher, then brake light on load. I used the red and yellow wires, one to ground, and other to trigger relay. Omit the black wire. This isn't the intended use for this wire, but it works perfectly. You will also need https://www.amazon.com/dp/B0CHJ7DTR7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and E-bike Hydraulic Brake Sensors Cable for Bafang BBS BBSHD Motor Power Cut Off US / not available on Amazon, I found mine on Ebay
Trustpilot
2 months ago
3 weeks ago