





🍧 Freeze Fun, Not Waste — Popsicles with a Purpose!
The melii Silicone Push Pops Popsicle Molds come in a 2-pack featuring adorable shark and bear shapes, made from 100% food-grade, BPA-free silicone. Designed for easy release and dishwasher-safe cleanup, these reusable molds enable you to create healthy, homemade frozen treats that are safe, eco-friendly, and perfect for kids and adults seeking a fun, nutritious snack.





| Material Type Free | BPA Free, Lead Cadmium PVC Phthalate Free |
| Material Type | Silicone |
| Color | Blue & Lime |
B**N
These are very well-made.
I filled these with sugar-free lemonade mix and they froze in about four hours. The caps are attached which is great and all I had to do was run a little warm water at the bottom of the tube and I could squeeze the frozen lemonade out. Because they're silicone, nothing stuck to the inside. I did get silly when I looked at them though and I'm sure you all are smiling, too.
L**A
High quality
The tops closed very well and stay on and open fairly easily
S**R
Good product
I haven’t used these yet but they are made well.The reason I am giving a 4 rather than a 5 is that the items arrived dirty like they were walked on. The packaging was torn as well. After washing them off, however, they are ready to use.
M**T
Easy to make the pops. NOT so easy to use!
Using this silicon mold to make push pops was easy. I tried a variety of pops ingredient combinations, trying to get a fudgesicle or creamsicle consistency. I varied different amounts of blended frozen fruits, milk or cream, etc. The silicon mold handled them all easily. I filled them, put them in the plastic tray, and put the filled tray in the freezer. The caps on top of the mold saved me in an "oh ____" moment. After filling one of the molds and pushing the cap on.... I dropped it. Surprisingly, the cap stayed on.Note: don't push them into the tray holes; gently place them in the holes. That makes it a lot easier to get them out of the tray after the pops freeze.5 stars up to this point....Then the big negative that swayed me to reduce the rating to 3 stars. I gave a frozen pop to my wife and she waited, and waited, and waited until she could squeeze the mold and get the pop to "pop up".This happened over and over, no matter what type of pop I made. We finally had to run them under hot water to melt them enough to get the treat out.A child under 5 wouldn't be able to get the pops out without help. If you expect to grab one out of the freezer, run out the door and eat it right away, it won't happen. It's not a grab/go/eat product, it's a grab/wait 10 +minutes/then run product.To be fair, I've never used an ice pop mold before. Maybe they're all like this, but after a good experience making the ice pops in the mold, the mold was very inconvenient to use to eat from.
5**F
Coolest push pops for kids!
We are throwing a little “here’s summer” party for our grandchildren when school is out for the summer. It’s just going to be for our 4 grandchildren, and their parents as well. I had no idea that we would find these Melilla silicone push pops! Things are looking good.Getting ready for their party, we of course need cold treats, and plenty of food and games. It was such an awesome moment when I saw these push pops. There are 4 separate molds. Each one has a separate figurehead that is attached to the top of the push pop. There is a shark, a bear, a bulldog, and a cat figurehead. They are attached to the mold so there is no worry about losing them. I feel so fortunate that we were able to order the 4-pack mold set together with a freezing tray. This way I don’t need to worry about them laying flat while they freeze. It would still work, but this is a way better way to freeze the push pops. What I’m really pleased with is that each of the molds, and the freezing tray, are top-rack dishwasher safe. They are also 100% food safe. The push pops are BPA free, lead free, PVC free, and also Cadmium free.Each push pop measures 6.9” tall, and is 2.0 wide. This is a great size for a push pop my grandchildren, or any child, to enjoy during the summer heat, or just anytime that a treat is in order. And I know from personal experience that the push pops don’t need to be surgery treats. There are plenty of mixtures that are healthy. I’m super happy about that. It’s an awesome idea to give your children, or grandchildren, a healthy push pop. They won’t even know.
E**E
Bad Design
This product is not a good design for its intended use. It takes a while for the contents to melt before you can push it up. I recommend the old-fashioned popsicle molds with a stick. This was a waste of money.
W**R
Creative Summer Fun!
The media could not be loaded. I was impressed with the quality of these popsicle molds, and I also like the "push up" style over the kind with the plastic sticks. The molds are made of a thick & durable silicone. The stand is made out of a thick plastic. The stand is a nice touch because trying to balance these upright in the freezer would be a mess waiting to happen. The molds do seal well enough where if you tip them on their side they won't leak right away, but there's some slow seepage after 5-10min (which is fine. They're not designed to be a leak proof seal).They are a bit difficult to push up straight out of the freezer (just like the old poka dot orangesicle ones!) but it you twist the silicone back and forth it loosens up really quick and easy (my 7 yr old could do it on their own). After that it's easy peasy. Just pinch from the bottom! And the best part...No Mess! All the melt from the popsicle just runs into the mold.I also tested out a slushy method & it worked! If you take them out of the freezer in 20min intervals and squeeze them after the 3rd squeeze they come out more like shaved ice. My kids also figured out you could take the whole popsicle out & put it in upside down & eat it like a regular popsicle (see pic) so they have multiple uses!My kids have had fun "designing" what they want to put in their Popsicles. You'd be surprised how many things can go in a popsicle. Everything from juice, chopped up fruit, yogurt & even peanut butter.Overall these are a lot of fun & can definitely be used to create healthier popsicle options at a much cheaper cost than store bought popsicles.
N**A
Nice
These are cute ice pop molds. The lids are large and do pop off a little easily so I would store them upright in the freezer so they didn't spill while in the freezing process. The silicone is thick which is nice and the colors and animal face details are cute. The set is only for two, which isn't great if you have more than one kid or want to make a large batch of ice pops but if you're just looking for enough for a few pops at a time this is great.
Trustpilot
2 weeks ago
2 months ago