HOUHUIDual Motion Sensor Light Indoor Under Bed Lights,16.4Ft Motion Activated LED Strip Lights for Bedside,12V Warm White Under Cabinet Light Two Motion Sensors LED Strip for Stair Closet Hallway

I tried another brand of dual-sensor LED strip lights but they were so complicated! All I want is for my lights to go on when I approach either direction, and then go off at a reasonable time thereafter. These little sensors don't give any options - which is GREAT! No fussing around with settings. They do exactly what they're supposed to do - on, off, on off! They're warm white so they don't glare in my eyes on the stairwell. I put the sensor at the upper end of the stairs just inside the stairwell so that the lights don't turn on every time someone walks by the stairs! (second picture) That works really well. I have bought another set to light up a dark hallway in the basement. And I'm thinking about a dark part of the garage where they would be useful. Honestly for twenty bucks, you can't go wrong.

I got this for my dad so he can see at night without having to turn on the hall light all the time. It works exactly how it says.So what and how to fix:1. It is dimmable! You need an RF LED light remote for led lights.2. Use what comes in the box. Everything comes in the box. The only other thing you might buy is the corner joiners.3. If you cut it wrong you could cause a short. The short is harmless, but it might short circuit the lights. And for God sake didn't put a nail threw it!4. LED are power sensitive, don't use another plug if you are not sure if the wattage and amps. Normally they only work with 1 plug but some cheaper ones use the same plug with different watts and amps.5. Don't put it on a light switch. It's not designed for a switch, because it has a switch. You are just wasting it's usage.LED are not perfect, if you have a short or problems read and then contact the manufacturer. The manufacturer cannot know how it will work in different environments. To much heat may give it a shorter life span, while colder may draw more power. But the life in LED should be measured in years, not hours.

Overall was easy to install and plenty long enough to wrap all the way around my king bed to night stands and power cord was plenty long enough. Motion detectors are almost too good! Have to keep CPAP hose up and away from the motion detector on my side so the light would not come on when not intended to be on. My only 2 things I wish this had was the ability to change the length of time before shutting off as well as brightness control, had to add a dimmer to it (one of the images shows a dimmer and it says do not touch with wet hands, but the dimmer is not included in this kit).

Seemed like a good solution for light when getting up at night. But…no. Finally removed them & threw them away.

These lights are perfect for a kid that doesn't like the dark floor at night. They come on instantly and they stay on for about a minute. The light is good, not super bright, but bright enough. They do need to be put on in a way that they shine down , we have them tucked up under the bed. The sticky part is staying put, so far, it's good. We're happy, no more scared of the dark!

I loved the ease with which these can be mounted anywhere. the lights are embedded in a thin metal strip and I placed them on the underside of my stair railing to the basement. the light emitted is the perfect brightness for a descent into the basement or the assent to the upper floor. However, when I finally was ready to test them using the sensors, I plugged them in and the lights didn't shine right away, but then in a few seconds, they came on...but then they went dark and then came on again and would NOT go out again unless I unplugged them. I didn't even get far enough to test the sensors because they wouldn't go out! I don't know what went wrong but I'm sending them back. I don't know if it's just this string that's affected, or if more than one has been affected. So, just keep that in mind.

I purchased these to have motion lighting under my bed. We had an adjustable frame that had motion lights and we decided to replace it, well the one that we replaced it with has lighting but they have to be turned on by the remote. We have a small furbaby and we like to know when he starts to move around at night so we don’t step on him so motions were not an option for us. The install went very well and easy until I got to the part where I needed to cut the light strip and use the connector 😬. This is very important for installation and I’m handy but I couldn’t figure it out. I watched a you tube video and I finally got it. To connect the lights via the cable you must place the cut end of the strip underneath the silver prongs on the connector and close it for a secure fit or else the lights won’t work properly and oh you must open them up too! They have a little groove on the connector that you must open. The instructions doesn’t show that part. If you look at one of the photos you willSee what I am talking about (see the 1st photo). Now that they are installed I am loving them! Also these come with two sensors so you can put one on either side of your bed. Once you connect them when one sensor is tripped all of the lights come on simultaneously. Also a big plus they operate by electric not battery so u don’t have to worry about changing a battery at all!! If you are looking for unserved lighting I highly recommend them!

Me gustó el producto por el doble sensor de proximidad el único detalle es que no es tan sensible, pero cumple su función

The media could not be loaded. La tira se ve muy bonita, pero no sirve el sensor del final de la tira y la luz nunca se apaga, sólo se atenúa y al moverte se prende con mayor intensidadYa sea de día o de noche siempre está prendida