magglass Matte Screen Protector for Samsung Galaxy S24 Ultra, Anti Glare Tempered Glass Guard (Easy Applicator Included)

Installed on a Galaxy S24 Ultra. A word on installation, which might explain other reviews and clarify this one. You need to remove the dust from your phone screen before you install this protector - or any protector. All of it. Every speck. Otherwise the protector will stand clear of the screen and prevent the adhesive from filling the gap between screen and protector, visible in the photos on some reviews. This is common to all installations, not just this one and if a speck does appear under the screen, you can sometimes gently lift one edge and use the provided sticky removal strip to remove it, but best to not have one in the first place - the number of times you can lift the screen without damaging it or compromising the installation is finite, meaning you may get one chance. Second related point, it helps to have a provided template to position the screen accurately on the phone. This system is one of the best I've used, and I've installed conservatively a couple of dozen protectors over the years, at least. Like all of the others, it helps to follow the instructions. Take your phone out of the case, have a well-lit, dust-free area with the phone on a protected and padded flat surface, and clean it. Well. Apply the screen as instructed. READ the instructions, and take your time. This one took a couple of minutes and installed perfectly. Thirdly, addressing some observations by other users, this is a matte screen. It reduces glare, and this one accomplishes that very well. It also reduces fingerprints, but does NOT eliminate them. You can still smudge the surface, and you need to clean it like any other phone screen. It will also scratch, just like any other tempered glass protector, with a hard enough object. And it can break. This, by the way, is what it's designed for, so these thing don't happen to your expensive and non-removable phone screen. And just like any other screen protector, after installation you need to remove and re-add any fingerprint lock you have already installed, and for good measure add a couple more. And under "Display" in your phone setup, you need to have "Touch sensitivity" checked. Just like with any other screen protector. Samsung phones are noteworthy in sometimes having difficulty reading fingerprints. Adding a screen protector makes it worse. In the case of this one, it works as well as any other glass protector, and better than most. Be sure your finger/thumb is moist, follow the onscreen prompts, pay attention to the popup messages and again add more than one fingerprint. Fingerprint security 101, on any device, with any protector. You'll also notice a slight gap of about 1/16" around the edges once installed. That's so a case will fit over it easily, and not impinge on or dislodge the protector. Like any other case-friendly screen protector. And it doesn't affect the ability of the screen to protect your device in the slightest, and simple daily cleaning that anyone should do, every day, keeps away dust and debris. With all of the above, this is an outstanding matte tempered glass protector, easy to install with one of the best installation systems around. Highly recommended.

So I love Matte screen protectors, I've used flimsy ones for years, and I prefer them over clear tpu or glass, the usability in sunlight is super important to me, and any hit on clarity is pretty negligible IMO. That said there is a clear negative that does concern me, protection. Glass is way more protective. So with my new S24 Ultra I decided to give this Magglass Matte Scren Protector a go, because it is tempered glass, but its also Matte!. here are my takeaways - 1. This works, install was stupid simple, it looks great 2. the "Matte" finish is similar to the TPU ones I have preferred in the past, but NOT the same, the TPU ones disperse light much better, this is more of an in-between, not as bad of a glare as with a naked phone or glass protector, but not as matte as a TPU matte screen protector. Now, if this protector with all of the above accepted and considered had no other issues, this would be a 5 star across the board review. my biggest and only issue I have is this 1. On my protector, which comes only 1 to a pack, with a perfect install, has a spot in the middle of the upper half of the screen, that is about the size of a dime, that is not the same finish as the surrounding protector. This causes this single dime sized spot to remain matte and mostly go unnoticed, but when sweat or oil from fingers eventually hit this spot ( like just from talking on your phone) the spot becomes shiny while the surrounding protector does its job and remains matte. This sure could be a one off, and maybe i got a bad protector, but its so disappointing, especially when the install went so simply and well. I did register this protector with the Magglass lifetime warranty, but frankly im dreading doing that process, getting another single screen with no backup on hand, and then finding the install doesnt go perfect because of a little piece of lint, OR having this glare spot on another screen again. For the price, you should get more than 1 of these in a pack. Update : I submitted the protector for a warranty replacement. That went fine they asked for a photo and I explained the issue with this defect that showed up from day 1. They sent me a credit and I processed the replacement myself and it's shipping at no cost to my and free shipping day. Here's the suck, three email confirming the replacement tells me that they only offer 1 replacement per item. So, the "lifetime" is the life of the original purchase. Which I am having to use for the defective screen...... so that's crap. I will not use this brand again in the future and can't recommend it.

I have bought two of these because after applying the first matte protector I wanted another as a back up. They look great, resist fingerprints, and the fingerprint sensor works. In regards to the fingerprint sensor, you first have to delete your prior fingerprints, next you have to turn on touch sensitivity, lastly you need to use two fingerprints for each finger. My ultra allows multiple prints to be used so i have found that this increases the speed at which the print is identified. I do this regardless of what protector i have or dont have. My only issue is with the proximity sensor thats by the ear piece. Currently its not working properly because of the protector. I don't know if its my fault because of alignment around the top camera but I'm not willing to take this off to find out. This feature is used to turn screen off and on while taking calls and hanging up. It prevents touches while in call. It was working before so its not my phone. This is why other screen protectors have that notch cut out above the screen camera, that's where its at. But i hate that look and chose the punch hole protector. All of Samsungs official protectors from them have the notch, hence why that is so. Anyway its still a nice, easy to apply, and worth the money protector. Also its known that darker screen protectors interfere with the sensor more that clear protectors if thats a concern for you, but matte looks amazing.

It was easy to install Love the anti glare for outdoors.

Really amazing surface finish. Sometimes have fingerprint problem but it is alright with such a good product.

Well done. Easy to install and looks good.

The recieved product is glossy not matt finished as descriped. Also the quality is not good.

Si è già rotta non so se per un problema alla produzione o che ma non voglio fare nessun reclamo. Però non mi sento di riacquistare questo prodotto... già sostituito con un'altro.