GT600 RGB Laptop Cooling Pad Equipped with Gigantic Turbo-Fan（5.5inch Diameter）,Sealed Foam for Rapid Cooling Gaming Laptop,14.1-19.3 inch Laptop Cooler with 3-Port USB Hub,Dust Filter

Fixed my Lenovo Legion 7i's CPU overheating. From the start of owning this laptop, I have had thermal throttling issues with the cpu. I tried using a software called throttle stop to lower voltages but it was still overheating. Nothing fixed the thermal issues until I bought this cooling pad. This is easily the best cooling pad I have ever bought for any of my laptops. The fan blower is very powerful for the size of the cooler. Even at 800-1200 RPM my laptop is no longer thermal throttling. The fan's RPM can be manually set using the built in screen. The only downside is that it can get quite loud at the higher RPM settings. This laptop cooler is pretty light for its power but you do need to plug it into a socket since a laptop can't drive enough power to it through USB. You can also use it on your lap so that your legs do not get burned by your laptop.

Picture 1 is Call of Duty MWZ, full 4K, maxed out settings on Performance mode. Laptop is an Alienware X16, I9, 32GB, 4080. Before this cooler my temps were maxed out at 100*C the second the game loaded, and never went down. CONSTANT throttling, and the laptop was hot as h***. Once the cooler was added (running a 2K fan speed) my temps never even saw over 80*C, and all 4 system fans were barely even spinning to keep the laptop cool. Picture 2 is Netflix running at 4K on a 32" MSI monitor, and Chrome open on my 1440P LG monitor. The system fans are not even on! This is a gamechanger for the gamer, or content producer using a lot of CPU and GPU. The filter on the bottom keeps all of the dust out of the laptop, reducing the need for cleaning. The noise, even at full tilt is a bit loud, but you have to give and take when working with these high end laptops. Normally, when just watching video, I keep it at 1200 rpm, and it is quiet. During 4K gaming at max settings, I usually keep it at 2000 rpm and it is manageable. The build quality is great, does not feel cheap or flimsy. My X16 fits with plenty of room to spare. Downsides: The power, RGB, and fan adjustments are not lit up. This makes it hard to find the correct buttons in a dim room. The foam pad tends to move around a bit if you try to adjust without actually pulling the machine completely off the cooling tray. Not a deal breaker, but over time I worry that the foam will degrade. Finally, the last downside is not being able to find the other models. I REALLY wanted the GT626 model, but right now at this time it appears to be a unicorn in the US. When ordering this one, the GT600 there were only 4 in stock when I purchased. Overall, if you are a casual user, this will be a life saver, and not bother you with the sound of the fan. As a gamer running higher end equipment, this is a MUST HAVE. Watching my PC barely even use the onboard fans, feels cool to the touch (if you know Alienware, you know) is amazing, and my SSD temps are usually in the 30 - 35*C range at all times. You get what you pay for, and this is worth every cent. Hopefully the longevity will be there, and the upper models become more readily available. Not sad I got the GT600, but I really wanted the GT626.

I’ve seen some people complain about the noise level, but honestly — come on, guys. This is a cooling pad, it has fans. Of course, it makes some noise, just like any cooling device would. But here’s the truth from real testing. I’m using this pad with a laptop that has an RTX 4060 and an Intel Core i5-12500H, and I’ve included screenshots showing how it performs at different power levels: Screenshot 1: Cooling pad turned off – my laptop’s normal temperature without the pad. Screenshot 2: Pad at 1000 power level – temperatures drop noticeably, and the noise level matches the laptop’s own fans at full speed. Performance stays stable. Screenshot 3: Pad at 1800 power level – this is my recommended setting for gaming. The cooling is very effective, while the noise stays comfortable for home use. Screenshot 4: Pad at maximum power – the temperature difference compared to 1800 is very small, but the noise is almost twice as loud, so there’s really no reason to go higher. Optimal gaming range: 1600–2000 power level, with 1800 being my personal sweet spot. Yes, it connects to a power outlet, not just USB — and that’s exactly why it’s so powerful. You can’t expect this level of performance from USB power alone. After all, your laptop itself also runs on wall power for maximum performance. In another room, the sound is about twice quieter than a hair dryer. If you play with headphones, the fans don’t bother you at all — it’s completely fine for gaming. However, if you don’t use microphone noise suppression, the mic will still pick up some fan sound, just like it would without the cooling pad — it’s simply the normal airflow. The build quality is excellent: sturdy frame, solid materials, and the laptop sits perfectly flat with no gaps or air leaks. The foam layer helps direct airflow right into the laptop’s intake vents, keeping cooling efficient and even. Because of that, the laptop’s own fans spin slower, reducing wear over time. Overall, this is a perfect choice for home use, especially for gaming laptops. Don’t pay attention to the negative comments — this pad works exactly as intended and outperforms most others in its price range.

Very powerful fans! I love the height it gives my laptop. It helps make it more comfortable to type on and use daily, all day. The fans get noisy at 1200+ if you are recording videos, but is quiet below 1200. I use it with the lights off because I like my dark space...it's easier on the eyes. The lights are still cool, regardless. They match my back-lit keyboard and that makes them ultra cool. This does a great job keeping my laptop cool while under heavy use, which I desperately needed because my gaming laptop was shutting down due to heat before I got this. I do not give this product a five star because the buttons can be challenging. They do not respond every time you push them, and some seem out of alignment from where they are supposed to be. So, if you fat finger it, you may land perfectly square on where the buttons actually are, rather then where they are supposed to be. That is my only complaint. Otherwise, this is a beast of a laptop cooler and I would definitely recommend it and buy it again, myself. Oh, It is worth mentioning that I have a 19" laptop (measuring from top left corner down to the bottom right corner with it closed) and this fits it perfectly. It is 15" across from left to right, 11" straight from top to bottom if that helps. My screen surface from top left corner to bottom right corner measures 17.5". That is important to know! You do not want to buy something that will not fit your laptop!

Awesome cooling pad, I use it for my Acer Predator Helios 18, I had to cut a bit of the foam for the fan to really reach the inlet and it's perfect, my laptop is huge and I thought it wouldn't fit but it really does and I can even use the stoppers without any problems, while it doesn't necessarily drop the temps since it's an i9, it really helps my laptop to turbo boost longer due to the incredible amount of air it pushes into the laptop with a massive airflow pressure, temps in regular usage drop by a lot and I only have it at 1000 to 1200 rpm (can barely hear it, when playing games I crank it up to 2800 and it almost sound like an airplane about to take off, but I rest assured that my laptop will last longer and that I made a good investment, will buy again as the products from IETS as they keep evolving, IETS is quality, I first bought the competition and it didnt even last me a month before it stopped working and almost burnt a USB port on my laptop, I've had no issues with this GT600 version and had the gt500 version for my smaller laptop, keep temsd low and more importantly I get to protect my investment 100% recommended!! PD: buy a 3mm foam from filter so you can replace the filter once it's too dirty, the default foam and cotton filter combo reduces airflow, I took off the cotton and made the airflow stronger but some dust will go through or airflow will be compromised if you don't clean it regularly, a thicker 3mm foam filter will be the perfect balance between airflow and dust protection and is washable (little tip, not a dealbreaker this product rocks!!)

sorry this is so long... UPDATE: Everything below stands but with more testing, I got it working. It's cooling my laptop significantly, it appears. But it's just barely resting on the foam on the back edge, on the left side it's not on the foam at all. I expect over time the foam will deform but it's a keeper. It kills me that I'm probably going to return this. It's a GT600 V1 (no lights), which is the super duper fan. It's a work of art, I'm serious, this thing is heavy in the box and beautiful. I was so excited to get this cooling solution on my MSI Pulse GL 76 laptop. I really hate to return it but unless I engineer some solution for my laptop, I will send it back. This will work BEAUTIFULLY if your laptop vents on the bottom a decent distance away from the edges of the laptop. Then there's MSI, and I don't know how many other laptop makers, who design their computers to deliberately (apparently) not work with these types of cooling pads. The basic idea of this pad is that you place your laptop on it and this makes a seal at the edges. The fan will be able to force air up into your laptop and cool it well. According to all the great reviews, and having held one in my hands, I believe it works really well. The funny thing is, to make a proper seal, you need about 1/2" minimum distance between your vents and the edge of the bottom of your laptop. Again, there needs to be enough laptop sitting on the foam to make seal. But additionally, you really need enough of your laptop on the foam so that it won't deform the foam over time, that's a consideration too. My MSI GL76 laptop vents on the bottom go nearly to the edges on two sides, on two important copper cooling tubes inside, it must be a heat release point. So I can't have at least 1/2" of my laptop base sitting on the foam properly. I did rig it up to test it out, where I barely had maybe 2mm of laptop base touching the foam on two sides. It was enough to make a seal. I was surprised how quiet the fan is compared to some reviews, I ran it right up to 2400 and it's not much louder than my laptop (which gets quite loud on full fans). I actually run it on 1400 now. It was surprising, I had mixed results, I only ran my computer for a short while because it appeared that at idle, just starting up with no apps, I was already running HOTTER with the cooler on. So something is amiss here, I am very sadly sending it back. Last note, when I ran it the first time, recently had my laptop apart to clean out dust and replace fans. When I ran it, a big poof of dust came out a vent on the top of my laptop, I missed it in the cleaning. Now my laptop run hotter even on my old pad. I'm afraid the force of this cooler might have blown some dust around in my laptop in a way that affects cooling. The end.

FIVE STARS, If you buy GT600 Dec 08 2025, beware that you mite get a good one. They change the buttons. Maybe you don't haft to press so hard downward. Just pass over them. This works fine, lights go on and off, fan motor wines down. HEARS the kicker . ONE STAR, I got two more Dec 18 2025. Lights don't go off, they just dim. Booklet that come with it said-----hold--long---pause . And after a long pause light comes back on and goes to the last fan speed # Its now 12-24-2025 and the charger little to warm for sitting all night doing not a dam thing and it still the light is on and dim. BEWARE ONE OUT OF THREE THATS ARE GOOD. DO YOU WANT TO TEST YOUR LUCK PUCK. GO ON HOME BACK TO YOUR MOMMY. LOVE YOUR MONEY...............Returned both. Amazon sent two NEW IETS GT600 . Lights go off on both when you turn it off. Easy touch controls ,just like the one i already have. I have nine of the IETS GT600. And all of them are doing real well. So i am looking for some upgrades. This would fit as one. I would need ten, if the money was right. Amazon got the replacements quick. And it is the hollow days also. Great job.

This is a premium cooling pad. I had a small issue at first—my laptop is an MSI and it's a bit large, with the fans positioned more toward the top rather than the center. The cooling pad was slightly too big and ended up covering part of the laptop's fans. However, I trimmed a bit of the foam, just enough to avoid blocking the airflow, and it worked perfectly. Before using the cooling pad, my laptop ran at around 50°C on idle (it has an RTX 4080, so it runs hot). Now, with the pad, it stays around 30–35°C. I also tested it with PUBG. Previously, temperatures ranged from 80–95°C, but now they stay between 60–85°C. The temperatures still fluctuate a bit, but the improvement is noticeable. The LED lighting doesn’t bother me—you can adjust the brightness and lighting pattern, which I think is a nice touch. The adjustable metal stand that holds the laptop is also customizable, which I found really useful. Overall, I’m very happy with this cooling pad. I didn’t have to cut much foam, just enough to make sure it didn’t block the laptop’s fans. One downside is the noise. The fans are quite loud, especially at higher speeds. You can run them around 1200–1600 RPM, which helps keep things quieter, but you’ll still hear them even with a headset on. If someone else is in the room, it could definitely be annoying.