Nilight LED Tail Light Motorcycle Brake Turn Signal Driving License Plate Rear Lights Smoked Plug and Play for Harley Davidson Dyna Sportster 883 1200 Road King Glide Electra Heritage

I bought these plug-in play LED tail lights for a quick easy upgrade on my horse trailer. I was a little bit skeptical of this product because the price was so much lower than buying these at my farm store, but upon arrival they appear to be basically the same thing. They do include a wiring harness in case you are wiring a trailer for the first time. However, if you’re simply swapping out your old original bulb lights for LEDs, these are ready to plug and play. The color is a bright red. They definitely have a modern look to them. I have a friend with a brand new horse trailer and that trailer’s tail lights look exactly like these. The light quality seems to be nice and bright. I can see them even in the bright sunshine. The rubber gasket does not have a super snug fit in the trailer opening, but I don’t think that is the fault of these lights. I believe that is just an issue with the actual trailer. I have replaced tail lights on other trailers and most trailers have a smaller opening, which would create a snugger fit.On one of the lights I did keep the original rubber gasket from the original bulb light because it created a snugger fit, but again I believe the hole in my trailer is a little bit bigger than it should be. Time will tell if moisture becomes an issue but I don’t think it will be. Installation is super easy! Check out my video where I basically did it with one hand. You might need two hands to snap the wiring harness into the light. At a minimum, you will need a pair of pliers to pull the existing light out by the gasket. You may need a rubber mallet to put the new lights back in. On other horse trailers, I have needed a rubber mallet, but on this one I was able to just use the force for my hands to get it in. Time will tell, but overall my initial evaluation is a quality product and I’m pleased with the results.

I bought these to replace the same size lights as I refurbished my 6x12 cargo/motorcycle trailer. Easy to install in existing slots. Perfect fit. Very bright. Much improved over the original lights. So much so, I bought the same style lights again, only in clear, for backup/reverse lights on the same trailer. Had to cut two new slots in back of steel trailer which was no easy task. Suggest laying out and cutting a sample slot on a piece of scrap metal before cutting into your trailer. I found that a 2-5/8in dia hole saw created a better fit for the grommet and the light - instead of the recommended 2-1/2 in dia hole. Slot height was 6-5/8in which worked out well. Used an angle grinder with a cutting wheel for cutting the sides of the oval cutouts between the two holes. Installation of the light into the grommet was made easier with the use of a little '3-in-1' oil on the inside periphery of the grommet. Electrical connections were made using crimped Ancor butt connectors with heatshrink ends. Made for a nice installation. Very bright, high visibility LED lights. Reliable. Highly recommend. Would definitely buy these again. UPDATE 1/25/2021: The red and white (clear) lights are a little different. I expected them to be the same. The grommets for the red lights are from a harder rubber/plastic and are a little more difficult to install than the white ones. The grommet also has a more shiny gloss-like finish. I reminded myself this is a 'cargo trailer', not a Mercedes. Also the housings for the electrical plugs on the back of each light are slightly different between the red and white lights. While they 'will fit' one another ... the fit is much better if paired with the correct light. Also, I applied a little Ox-Gard to the electrical connectors to prevent oxidation and keep out contaminants. Stay well.

Removed the turn signals mounted on the side of my bike and bought this to replace a old tail light that had turn signals built in. Lights are nice and bright. Looks better than I thought it would on the bike. Only thing I dont like is it doesn't exactly fit in the tail light mount. Its not curved enough to fit to the mount. So it kinda fits lose. On the sides, so you've gotta press a little one the light to make screws grab. I'll likely have to seal with silicone.

Nice and bright. Rubber is a little smaller than the original but works well. Plugged directly into my wiring harness.

Great replacement for bulb-type tail lights and much brighter. Perfect fit on Roadrunner boat trailer. Great value...2 for the price of 1 locally. Easy to install. Came with grommets and wiring plugs...although I was able to simply unplug my old lights and install these (same 3 prong connector). Highly recommend these.

Ordered these for my 08 Ford F-350 with a Gooseneck Trailers Mfg. Flatbed to replace a few that had burned out, and I have had no issues with them, they're incredibly bright and work as advertised. I have a couple spares, but will be buying them again in the future when I need them for my truck.

Perfect replacement for a dump trailer. They fit right in and wiring was easy!

Very good lights for the price. They look great and are very easy to install. We blew a tire on our boat trailer and it bent the metal fender and pushed it out of the grommet, send it flying down the road at 70 miles per hour. found it lying beside the road, plugged it in and it still worked.