BACOENG 12V DC Farm & Ranch Solar Water Pump Submersible Well Pump DC 20FT Lift

I just bought this pump and used it for 3 hours straight. It ran the whole time with no disruptions. For a little over $40, it is definitely a buy. I measured the output with a 5 gallon bucket which took 30 seconds. I guess it to be 9 to 10 gallons a minute which is probably the best you will get from a 3/4 hose. The output connection is cheap. It is the exact same size as 3/4 iron pipe, which will not thread into a fitting. I bought some 1" tubing from Lowes and stuffed a 3/4 x 6 inch galv. nipple in the other end for an adapter. I put a 3/4 x hose brass adapter to connect to a garden hose; Don't forget the hose clamp. I checked the flow with just the 2 foot piece of 1 inch tubing and it filled the bucket in 15 seconds, or 20 gpm, or 1200 gph. A 1 inch drain hose would flow better.

4 months, still going.

This little pump is redicilious. It won't die. I have it hooked up to a 100w solar panel with a small charge controller and a little gel cell battery. I set it up on a little pump station in some fresh packed sand and dirt. we had a small tornado and 19 inches of rain come in floated the tank out how the pump didn't break is beyond my imagination. the pump is literally sitting in a mud hole pumping dirt, sand, clay and who knows what else debris for 15 days now. here is the out flow in the picture of it discharging over a 25' tall dirt berm. its still working. out of the box, I immediately said I got ripped off, it looks poorer quality than what the picture looks. it won't die. I've had to guilds 1.5 horse pumps run for a day before they quit in the sand in mud. this one kicks on every morning with the solar controller when the sunlight gets bright and shuts down every afternoon when it gets dark. This little pump, doesn't put out much, maybe 10gpm, but it's a beast, it just keeps going and going and going. I'll probably buy another one.

The 3/4" threaded output is crap. The metal is so thin and the threads so poorly formed that I couldn't use them. I used the output as a 1" barb and put a hose clamp on it. It seems to be working ok. Besides that the pump seems ok.

Despite what the diagram shows the controller and panel do not come with it