Timetec Pinnacle Konduit 16GB KIT(2x8GB) DDR4 3200MHz PC4-25600 CL16-18-18-38 XMP2.0 Overclocking 1.35V Compatible for AMD and Intel Desktop Gaming PC Memory Module RAM - White

I did not have any problems, and they work great also it was a good price.

Great looking ram, fast and well performing

I purchased these because I needed jedec ram, my motherboard doesn't support exp profile memory so when I had purchased some gskill ripjaw ram for my pc it down clocked to 2666mhz, and cas latency went up, so because it was exp, that being said ive used ripjaw ram in the past and its a good product, so I decided to purchase this ram as it is, Jedec compliant Duel rank Does run at advertised speed of 3200mhz. So far no problems, if wondering my system is as follows. Intel Core i7-10700, 8 core, socket fclga1200 Samsung 990pro 1tb Samsung 850evo, backup drive 512gb 3 monitors running off of integrated graphics. And this ram. The product runs in my system flawlessly and is very quick. I contacted their customer support to make sure that this ram will infact run at advertised speed. The responce to my email was very quick, same day, I will be purchasing more of this ram. I have 2 more of these computers. Same motherboard, processor, ect. So in summary great product and customer support.

It was nice for the price and it works.

These sticks have relatively good speed and are worth the price if you don't want to spend as much on RAM the only thing would they won't be as noticeable on a motherboard but overall worth it.

OPEN BIOS AT START (DELETE OR f2 key) THEN CHANGE DRAM VOLTAGE TO 1.25V (ASSIGN CHANGE TO CORRECT SLOT) Then, CHANGE 3200MHZ TO 3333MHZ GETS U FASTER RAM, NO CRASHES, NO SHORTED CIRCUITRY: GREAT PRODUCT.

Great product, high quality, and couldn’t ask for more for the price, fast, and easy to install.

Before you spend money on RAM, go to the maker of your motherboard and look at their QVL information. (The QVL lists all the specific ram that was used to test the motherboard. It is the ram that is guaranteed to work with the motherboard, because it was tested by the motherboard manufacturer and it worked.) I missed that step, and found out the expensive painful lesson that four sticks of RAM may not be supported at the frequency listed on the RAM module. My motherboard has a 4 x DIMM, Max. 128GB, DDR4 4400(O.C) capacity so I felt safe going with 3200 MHz as it was the recommended speed for my processor. I bought two sticks of (8 GB) for a total of 16 GB, and it ran perfectly at 3200 MHz. A few weeks later, I bought a second set of identical RAM (Same manufacturer, date code, frequency, capacity, and CAS latency) to double my RAM to 32 GB. When I put the second set in to fully populate all four slots with (8 GB) each, The computer refused to boot and forced me to downgrade the 3200 MHz listed RAM to a maximum of 2400 MHz. After much searching, I was directed to the QVL information for my motherboard. When I reviewed the information, the fastest RAM speed my motherboard would support with all slots filled was 2800 MHz. As it turned out, most of those were too expensive for my budget. I've past the return window for the first set and the window for the second set is just days away. So now I sit thinking about the following: Do I run only two (8 GB) sticks at the higher frequency of (3200 MHz)? Do I lower the frequency to (2400 MHz) to run all four (8 GB) sticks? Do I scrap all four (8 GB) sticks and buy two (16 GB) sticks at (3200 MHz)? Don't make my mistake, buy the higher capacity up front and save yourself headaches down the line if you plan to run high speed RAM or want to overclock it. ------------------------------------- UPDATE ------------------------------------- I took the time to contact the manufacturer of the ram, and to my surprise after talking through the whole QVL debacle they extended me a one time courtesy of sending me 2 sticks of 16 GB DDR4 3200MHz PC4-25600 CL16 ram. They sent it to me via USPS and allowed me to test the new memory before deciding which ram to send back. The whole process from first contact to my returning the old ram took about 10 days, but during that time the only down time I had on my system was the 5 minutes it took to swap out the 4x8 and replace it with the 2x16. I couldn't be happier with the customer service department of the ram manufacturer. The two sticks of 16 GB ram are running at 3200 MHz with the following timings of 16,18,18,18,38,73. Again, I can't stress this enough. CHECK THE QVL INFO ON YOUR MOTHERBOARD. It will save you countless headaches post build.

Super, reçu rapidement et fonctionne bien sur mon pc gamer

Meu amigo, que memória ram bonita da bobonica, ainda não instalei ela pois ainda estou esperando as outras coisas pro PC mas só de vista ele é muito lindo, pelo jeito ele é rgb, não tenho certeza, veio em uma embalagem simples mas bonita, vou tá deixando fotos pra quem tá querendo comprar, ver como ela é pessoalmente.

After using the DDR4 3200 2x 16GB kit got almost half a year now, I have to say I am very happy with the product. While the bare ram made it look inferior to those “high performance” ram kit which generally comes with some creative looking heat spread, this no frills ram kit don’t perform any worst. In fact, it is so hard to find ram kits that tells you clearly if it’s single or dual ranked, and also the latency timings. So I appreciate the transparency here. Highly recommended due to stability and price.

MUY EFICIENTES Y DANDO UN MEJOR RENDIMIENTO A TU PC

1 stick of RAM does not work at all.