KPON Invisible Wireless Charger,30mm Under Desk Charger Mat, Furniture Table Nightstand Desktop Charging Station for iPhone17/16/15/14/13/12/Samsung/LG/Google Pixel Desk Essentials(with QC Adapter)

It worked very well through1 1/2” quartz countertop. It keeps the countertop uncluttered from wires. It is easy to install as long as you have power supply under the counter.

This is the most complete charger I have seen. Once installed, all you see if a sticker on the desktop, No cords or charging disk. Nothing to knock off the desk or break. This charger charges my phone with no visible charging unit or cords. When opening the box I was surprised at all the parts. First was a Company card with links to the company and installation video. Next was the manual, the bracket, the stickers and the charging disk. Below all that was the cable and USB Adapter. The USB Adapter is a 18W USB Charger/Adapter. The stickers, one with electronics in it and the other to put on top to indicate where the phone goes to charge. There is also this cool "Alignment Assistant", a Wireless Locator that tells you where on top of the desk is exactly where the charge is located. This Locator has 6 LEDs and they light up based on where it is located, if all are lit then you are dead center over the charger, pretty cool. One thing I did not expect was that you cannot just place the phone directly on the charger, it needs to be below the desktop. PS: they tell you thin in the instructions. To start I cleared off an area where I normally place my phone. I then removed the backing from the mounting tape of the bracket and placed it under the desk at that location. Next plug the USB Adapter into the wall and attach the provided cable from the USB Adapter to the charging pad. What I did next was place the Power Sticker on the desk with the "Alignment Indicator" on top of it, centered. I slowly moved it around until all 6 LEDs lit up. I put a few pencil marks on the desk to indicate where to put the Power Disk. Then removed the backing from the Disk and placed it between the pencil marks. I put my phone over the Power Disk and my phone started charging. It was fairly simple to install and align the Power Sticker, with the aid of the Alignment Sticker. This cost the same or a little less than other Desktop Wireless Chargers that I have tried. They were always getting knocked off the desk, has a pesky cable and were just inconvenient to use. By far this is the best value and a lot easier to use. I just move whatever over and place the phone on the Power Sticker. I currently use this on my desk and we are thinking about getting more, one for the nightstand and another for the table at the end of the couch where we watch TV. Overall this is a great charger and reasonably prices, simple to install and use. There is nothing in the way and it keeps my phone charged.

I love that this device can charge wirelessly while being relatively unobtrusive. It comes with a metal sticker that sticks to the top of the desk or surface, while the electronics of the unit are mounted underneath. The instructions explain that depending on the thickness of the surface the sticker may or may not be required. In my experience, I would not anticipate being able to use it without the sticker in any circumstances. It seems like the sticker focuses the energy somehow. Without it, the charger is slow, may cause excessive heating, and may throw and error and refuse to charge at all. Nonetheless, with the sticker in place it seems to work reasonably well and still looks very nice. I would have preferred the charger to be completely invisible from above, and the sticker interrupts the surface of the table I mounted it on, but having the sticker means you can see where to put your phone and it charges more consistently.

Great wireless charger. You will need to use the coil pad to really get a solid charge through surfaces but works nicely

if its in a case. I've 3 cases that allow Qi charging and for all 3 cases (fitting my Galaxy s22 ultra) i lose power. Does Not Always charge my phone even without a case. I used the Amazon Contact Mfgr with questinos, and heard no response. I spoke with an Amazon rep about the problem and wished to ask Kpon about how to fix this problem, and I was referred to the "contact mfgr" link, again sent a message to Kpon, no response. I tire of each night taking the phone from it's cover. Purchased charger 3 months ago, no response from Kpon,. I've removed it from my desk, tried different thicknesses of wood, marble, and though I can get their light bar / positioning installer to light up, it Will Not charge through my 10 dollar basic / typical plastic cell ph case. really a wasted 35 dollars. sigh

Nice product, relatively easy to set up. Was able to find the sweet spot per instructions. Nice design, but my phone heats up while charging. Don’t know if its the phone case or what. I’ve tried re-positioning the phone on the pad…I really would like it to work, but will probably go back to using my previous cradle charger if I can’t solve this problem.

It's really convenient. No extra charging cable to use. I was wondering why the assistant wasn't lighting up but turns out I had the charger put in upside down. Make sure to have it facing instructions side up towards your desk. Installation was easy. It can charge without needing a sticker but I opted to use the transparent sticker over the coil sticker which I had to throw out cuz a bunch of residue from the paper adhesive stuck onto the paper and I didn't want some sort of risk with it. The transparent sticker is inconspicuous enough but still lets me see where to put my phone down to charge. Was hard to find a good place to put install the charger under my desk. I pulled the tray out repeatedly trying to find a good spot for it without anything getting in the way of the charger if I wanted to take it out again. Hope the adhesive keeps sticking after I did that lol For people concerned about their phones heating up, both your phone and this charger have protective measures against that. The phone will stop charging if it gets too hot and so will the charger. Even regular charging cables will heat up your phone if you leave it charging for too long. It's not like the entire desk is gonna catch on fire the way some of these reviews are making it seem. Overall aside from the defective power sticker I had to toss out. I'm very happy with this product and may buy the upgraded version of it once I see how this one fairs for a few months

Love it

Devo ammettere che inizialmente questo articolo non mi ispirava chissà quanto dalla descrizione, ho pensato che non avesse poi chissà che utilità, sempre assodato che avrebbe funzionato. Però quando vedo cose tecnologiche mi parte la curiosità abbastanza implacabile ed ho deciso di provarlo ed ho praticamente detto a me stesso: wow. Arriva in una confezione che non definirei bellissima ma è sicuramente funzionale a contenere il tutto in maniera protetta e senza occupare grandi spazi. La fase di montaggio è davvero semplice con la basetta principale, cui dovrete collegare il cavetto USB-C incluso per l'alimentazione, va sotto la scrivania o comunque sotto il piano d'appoggio del telefono. Ora: vi sono degli sticker aggiuntivi che fungono da estensione del raggio d'azione. Questi andranno usati solo quando la distanza tra questa basetta ed il piano di ricarica sarà superiore ai 2 centimetri (ma massimo 3). Io ho avuto modo di effettuare i miei test su un piano di esattamente due centimetri di spessore. Quello che mi ha sorpreso è che ha funzionato tutto e subito, senza dover fare nulla di particolare. Mi basta ora appoggiare il telefono in quel punto della scrivania e parte subito la ricarica wireless nonostante io abbia anche una custodia abbastanza spessa (che in macchina mi dà non pochi problemi per la ricarica wireless). Il telefono che sto utilizzando è un Samsung, non ho avuto modo di provare con Iphone. Diciamo che appoggiarlo sulla scrivania alla cieca sarebbe un po' seccante ma ci viene incontro un piccolissimo accessorio, incluso, da attaccare sulla parte superiore della scrivania. Ha delle lucine led ed è facile trovare il punto esatto di applicazione in quanto le luci led si devono accendere tutte quando è nella migliore corrispondenza possibile. Vi basta quindi staccare l'adesivo ed il gioco è fatto. Allora, che dire: è una soluzione estremamente comoda se volete togliere qualche filo dalla vostra scrivania o per soluzioni creative magari in cucina o, perché no, sul ripiano di una lampada da pavimento. Avere la possibilità di "nascondere" il caricatore è davvero interessante. Per far funzionare il tutto al meglio, però, dovrete utilizzare il caricatore USB incluso o comunque uno con tecnologia QC3. Difficilmente, quindi, potrete sfruttare le porte USB di qualche lampada, sveglia o computer in quanto non forniscono tutta questa corrente. Ho fatto qualche prova ed in alcuni casi ha comunque funzionato ma la ricarica, chiaramente, si rallenta all'inverosimile. Considerate che già al top delle sue possibilità è, per limiti tecnologici, già più lenta del normale cavo USB-C ma l'idea di appoggiare il telefono sulla scrivania e ritrovarmelo con qualche punto percentuale in più sulla batteria mi alletta non poco. Mi aspettavo un costo intorno alla quarantina di euro ed è quello che ho trovato: al momento, anzi, c'è uno sconto del 10% attivo che non guasta di certo. E' un oggetto che mi ha sorpreso positivamente e di cui non pensavo di avere bisogno ma adesso vorrei tanto averne un altro per rendere migliore la postazione di ricarica anche in soggiorno visto quanto è discreto questo oggetto e che si può attaccare tutto con i semplici adesivi inclusi. Promosso a pieni voti.

Ce chargeur par induction s'installe sous une table ou un bureau dont l'épaisseur est inférieure à 3cm. L'installation est assez rapide et s'effectue par collage. Ainsi, le meuble n'est pas abimé. 1ère étape : on installe le support plastique sous le bureau 2ème étape : branchement de la station et la placer dans le support. Attention, il y a un sens, le côté surface pleine doit être situé vers le haut sinon cela ne marche pas. 3 étape : le disque témoin permet de repérer l'emplacement exact où placer le téléphone. Le repérage est précis, des leds s'allument pour informer vers quel côté déplacer le disque de repérage. L'installation étant terminée, le téléphone n'a plus qu'à être placé pour la charge. L'avantage de ce chargeur est qu'il est invisible car situé sous le bureau. De plus, si le bureau est inférieur à 2cm, il n'est pas nécessaire de place le sticker, un point au stylo bille suffit pour marquer l'emplacement de dépôt du téléphone. L'invisibilité de l'installation devient alors totale. L'inconvénient, c'est que le téléphone sera placé qu'à un seul endroit, et même si déplacer l'installation reste possible, les collants du support ne tiendront pas longtemps si les déplacements sont fréquents. Enfin, la puissance de sortie est de 10w, pour un iphone ce sera suffisant, par contre la charge rapide ne sera pas possible pour certains modèles.

Ne charge plus après trois moi d'utilisation

Easy install and charges both iPhone and Android phones.

I personally use this for my earphones case. It does charge and it charges well but sometimes when I set the case on the charging pad the charger buzzes and doesn't work. It's actually quite loud and can be annoying when sitting at the desk the only way to resolve this is to remove the case which means it won't charge. I found waiting 5 minutes then setting it back again will allow it to resume charging. If I could do it again I would look for another brand but under desk wireless chargers do work