Vari Dual Monitor Arm - VESA Monitor Mount w/ 360 Degree Adjustment - Monitors up to 27 inches, 19.8 lbs - Double Monitor Arms with Full Adjustability - Computer Monitor Stand for Home or Office

The versatility in this mount is fantastic! Perfect for ANY triple monitors set up. The combos I have tried, have been: - 1 curve + 2 24 in. Monitors - 3 24 in. horizontally - 2 24 in. Horizontally configured and 1 24 in. Vertically to the side. Install Tip: Have a socket wrench handy with a 10mm hex bit handy. Some of the tension screws were a bit stubborn to loosen/tighten with the supplied Allen keys.

These dual monitor arms are just what you need if your monitors take up lots of space on your desk. They were easy to assemble and install. My head is now clear because I removed the clutter that was on my Varidesk and driving me crazy. These arms are sturdy, easy to adjust and maneuver, and look sleek and professional. The positioning and height are perfect. I can easily adjust the monitors to fit my needs whether I am sitting or standing. If you work with dual or triple monitors, these are the arms for you. I have the dual monitors connected to my laptop. They are a little pricey, but for me, it's an investment and was worth it from a sanity and productivity perspective. I am not fumbling with the papers and other items on my desk that get crammed because my dual 29 inch monitors took up so much space. I hope this helps you make the decision to purchase these dual arms. They are worth it!

Edit 2 years later: I had to disassemble and reassemble this (without removing the monitors), and I was blown away by how easy it was, how the arms snapped cleanly in to place. I feel like this was a great investment. Additionally, screen wobble isn't an issue. Make sure to tighten everything. Assembly wasn't flawless: 1. The monitor screws are kind of long. There is about a quarter inch between the back of the monitor, and the bottom of the screw head. At the hardware store, I got some plastic spacers (1/4" thick) and they helped fill that space. 2. The silver, swivel ball on the monitor Bracket is really difficult to use. Like, my screen is flexing and will probably break before I could get that ball to move. Try to move it from the back-side of the monitor or by only using the arms (rather than pulling down from the front) to get it down. I also had to disassemble the bracket from the monitor, and play with the ball to get used to how much force it requires. 3. The screen wobbles when I type normally. The arm is mounted to the Fully Jarvis desk, 48" long by 30" deep, and 3/4" thick. Edit: Adjusting the arm screws to be tighter has reduced the screen wobble when I type. Other suggestions were to add bushings at the joints to dampen vibration (not sure dimensions of those bushings), and to get a keyboard tray.

There is no doubt that this is a sturdy, high quality monitor arm. The laws of physics are its only downfall. I had no problem assembling and installing this on my Vari desk. Adjusting the tension in each arm, to accomodate the light weight of my monitors, was very easy too. The cord storage was awesome, no more cluttered desk area. When using the monitor arm, while my desk was in the lowered position, everything was perfect. Stable, sturdy, they were at the perfect height. I raised my desk to the standing height, and that's when the shaking began. I don't bash my keyboard, but even the most normal of typing, or even gently bumping up against my desk, caused the monitors to bounce. My desk is in a carpeted room, which probably doesn't help either. The carpet, combined with the height of the raised desk, combined with the length of the monitor arms causes the bouncing. I chatted with Vari support, and they suggested reducing the tension on the arms (I tried that, didn't help), and also placing something very heavy on my desk to stabilize it. There's not enough room to put anything of substantial weight on the desk, so that's not a solution for me. Sadly and reluctantly, I returned it. This would be a perfect solution for someone who doesn't use a standing desk, or maybe even if your desk is on a hard surface rather than carpet.

Pretty easy to set up and it really opens up the desk area since the monitors are not using desk space. I've been using this for months now and still working nicely. They haven't dropped down and have stayed in same position i set them in.

Twin monitors support lift. These are neat and awesome with right height for working on the computer daily.

Dual monitor arms were easy to install and work great.

Good quality. Very easy to install.

perhaps a little pricey but quality build and does teh job perfectly.

The build quality of the product and the ease of installation make it worth every penny. I was also able to set up a configuration where my main screen is perfectly centered, which is fantastic. While the "feet" of the monitor arms need to be quite offset, it still works well! My only critique is that I’m using a countertop as a desk, which is very close to the clamp’s limit (1.375 inches). It would be great if Vari offered an option to make the arms compatible with a wider range of desk thicknesses—even if it meant an additional cost.

Works well with 27 inch monitors. Once the springs are adjusted I taped the two monitors together with gaffer tape so they move in unison.

A nice add on with the desk. Holds up well.