







🌿 Grow Up, Stand Out: The Ultimate Climbing Companion for Your Garden
The Relaxdays Obelisk Climbing Plant Support is a 200cm tall, powder-coated steel trellis designed to provide sturdy, weather-resistant support for climbing plants. Featuring a quick plug-in assembly and a stable structure with three metal rings, it’s perfect for enhancing your garden’s vertical space with roses, ivy, or berries while adding an elegant decorative element.






























| ASIN | B004W1H5VK |
| Best Sellers Rank | 88,328 in Garden ( See Top 100 in Garden ) 857 in Plant Cages & Supports 899 in Decking & Fencing (DIY & Tools) |
| Customer Reviews | 4.1 4.1 out of 5 stars (506) |
| Date First Available | 11 April 2011 |
| Item display height | 192 centimetres |
| Item display length | 35 centimetres |
| Item display weight | 1.5 Kilograms |
| Item display width | 35 centimetres |
| Item model number | 10012492 |
| Manufacturer | Relaxdays |
| Material type | Steel |
| Part number | 10012492 |
| Power source type | Hand-operated |
| Product Dimensions | 35 x 35 x 192 cm; 1.5 kg |
J**.
Cheap & cheerful!
Such a low price (£6.54), elegant shape, easy assembly, just tighten the little screws to stabilise (and I may tape over the joints to extend it's life). Quick delivery. No complaints.
G**S
Not as easy to put together- needs two
Sturdy product but to construct needs two
G**T
Good and sturdy
This was easy to put together but needed two people to hold it was good quality and sturdy once constructed
S**E
Fiddly to construct.
The instructions consist of a diagram of what it should look like when built. Each separate item is numbered so you can recognise which bit goes where. The vertical rods have holes which are all aligned. The rods for the middle and top sections are narrowed at one end to slot into the rods beneath. The top section rods are curved to form a pinnacle. So make sure to get the curve facing inwards! A couple needed a good push to slot on but the others fitted easily and aligning all the holes with the bracket for putting the bolt through was easy. The nuts are of decent quality but are small and fiddly. When building the first section it was quite awkward because they are so small. It was easy to cross thread them but as more of the obelisk took shape and coould stand upright, the nut and bolt fitting became much less tricky. I used pliers and a small crosshead screwdriver to do the job. Once constructed it is a bit wobbly despite having tightened the nuts and bolts as much as possible. The arched ends of the top tier rods would not fit together because the end sections with the bolt holes were pointing upwards. With care, I bent them inwards and pushed them together. There is a choice for the top. A fancy curved thing is included but I found that way too fiddly to attach so I opted tu use the spare nut and bolt to just fasten all four rods together. That was fiddly because there isnt much room between the four curved rods to manoeuvre the pliers or screwdriver. The coating is a dark green and looks good. It will do the intended job of training honeysuckle but overall it is a bit rickety for the price. It was very fiddly too so I don't think I would buy this particular one again. I suppose building it was the easy bit and getting the Honeysuckle to go where I want it to go will be the real struggle.
I**G
Great vfm. Pictorial instruction sheet.
Wasn’t expecting a flat-pack, but it was all there and unlike most self assembly items was fairly easy to put together. Unpack ALL the pieces and check them. An 8mm, a 10mm socket and a Phillips screwdriver will make the job easier. There are 12 nuts and bolts (8mm) and one separate 10mm nut for the top finial. Well made and seems stable. Time will tell.
E**M
F aged 71 with Arthritis found v difficult to put this together....
Got it together with Blood, Sweat and Tears! I luckily found a little spanner and screwdriver which helped with tightening the nuts. I had to bend the tops of the top section in order to bolt them together. The nuts are really tiny and I did not find the "instruction" sheet any help at all. Overall, though, I am pleased with the end product. I don't know if it will help anyone else, but putting it together laid down on its side worked for me.
S**N
Good for indoor Christmas decorarion
Wound Christmas lights around this to create an indoor Christmas tree. Sturdy for this purpose but can’t say how it would be outdoors. All parts included and arrived as described
S**A
Not great!
Not good quality. Been in garden for a year and it is wonky and breaking!
E**A
Ottimo sostegno per rampicanti, bello e solido
L**N
Underlättar för växterna på altanen
M**L
Contente de mon achat
A**.
Je m'attendais à plus de solidité....il ne faut pas que ça vente de trop!!
R**L
El artículo se ve de muy buena calidad, fácil montaje y queda muy bonito
Trustpilot
2 months ago
1 day ago