TECKNET Wireless Doorbell, IP65 Waterproof Wall Plug-in Cordless Door Chime Kit with 1300feet / 400m Range, 60 Chimes, 5-Level Volume & RGB Light, Best for Plug in Door Entry Bell

Works really well. Plugged in and worked immediately. Volume is good. Thankfully the noise doesnt scare our rescue dog so left it on default ringtone. Would recommend. Great that it just plugs in so can put it in any room you like.

This Tecknet wireless door bell is great value for money, very easy to install and already paired for installation, lots of different tunes to select, the volume setting allows someone with slightly impaired hearing to hear the bell clearly, I would definitely recommend this door bell.

It has four volume settings, the loudest is very loud and clear. The ‘bell box’ has a multi-coloured light that activates with the noise, so it could be useful for deaf people. Really easy to set up and use (I got for my partially sighted/partially deaf mother). 1) Plug ‘bell box’ into standard plug, within earshot. 2) Important! Pull little plastic tab out of the back of the ‘button box’. This connects the battery. 3) Put sticky pad on back and attach on, or adjacent door.

I’ve been very pleased with this product. It arrived on time, well-packaged, and in excellent condition. The quality is solid, and it performs just as described. It’s clear that attention has been given to both design and usability. What I appreciate most is the balance between quality and value — it feels reliable and worth the price. I’ve had no issues so far, and it has met (and even exceeded) my expectations. I’d happily recommend this product to others who are looking for something dependable and effective.

Ding! Dong! Great wee buy. Not as loud as I expected (even on max volume) but that is perfect for my wee house. Nice varied choice of ringtones and the flashing lights are a nice touch. It claims to have a battery life of approx. 4.5 years which is longer than other bells twice the price. Simple to install too - took me more time to decide where to place it than it did to fit it!!

Excellent item, so easy to install.

Our house is an old, stone-built place with very thick exterior walls. Our old wireless doorbell (bought from a local supermarket) was rather hit-and-miss: partly too quiet, partly the battery-powered receiver losing power, partly range issues through the thick walls. But the worst issue was that the pushbutton was a sort of rubber dome. Often, if someone pressed it with a 'heavy finger', the button would get stuck - and future presses would not register until I pried the awful rubber button free. We have missed many, many deliveries because of that dreadful doorbell; I wanted to install a 'proper' wired doorbell, but getting the wires routed through all the stone walls was going to be an issue. So, in the end, I decided to give wireless one last try and purchased this Tecknet doorbell. It arrived in decent packaging - a nice, tidy, sturdy little box, well-packed in a padded envelope. Despatch and delivery was very prompt (next day), and thankfully our old doorbell hadn't got stuck, so the courier managed to get it to us. The item arrived in pristine condition. Installation was very straightforward - for the bellpush, I just had to pull out the little tag which keeps the battery disconnected in transit, and then I opted to attach it to the door using the provided double-sided peel-and-stick foam tape. I carefully cleaned the area of the door with isopropanol first, and it has stuck firmly - seems like a good bond. Screws and fixings are included as well. The receiver was operational as soon as I plugged it in; there are a few options to configure, but the default settings are reasonable. Hint: configure the receiver before mounting the bellpush, it will save you a lot of to-and-fro! Configuring the receiver is done by three buttons on its side: one cycles through the chime (I opted for the default 'ding dong'), one cycles through the loudness (I opted for maximum, which is a good level and noticeably louder than the predecessor) and the last cycles through the brightness of the visul indicator - I left this alone, as the receiver is plugged in in a location where it is not easily visible. It is slightly annoying to have just one button per setting - if you 'miss' the setting you want you have to cycle through all the options again. Next/previous buttons would have been nice, but then it only takes a minute or two and you only ever have to do it once - and, as mentioned, it actually works fine right out of the box with no configuration. As to performance, the system works really well. The bellpush works perfectly - it even lights up when pressed, although this is not easily seen in full sunlight. The button shows no propensity to get 'stuck', and has a much better 'click' action than the old spongy rubber of the predecessor. In spite of our thick stone exterior walls and even interior stone walls, I had no problem locating the receiver - it seemed to work wherever I plugged it in; range seems to be no concern at all. Having the receiver be mains-powered rather than battery-powered is a great convenience - not only is the output louder, but there is no need to worry about a flat battery making the receiver inaudible. The bellpush is powered by a 12V 23A alkaline battery (included in the packaging). Although this is a slightly unusual battery, it seems to be quite easy to get, either at the local supermarket or on Amazon (you can get a pack of 5 for under £4). It is easy to pop off the cover with a fingernail when you need to change the battery - even if you have terrible fingernails, like me. The battery itself is located in a position which makes it easy to change - a sensible layout and design. Overall I am very satisfied with the system. My previous bell had left me thinking that wireless doorbells were worthless, and had resulted in so many missed deliveries. But no more: I am anticipating a much better relationship with the various couriers who come around from time to time. I wish I hadn't 'lived with' the old bell for so long before going for this replacement. Highly recommended - especially at the price.

We took the back off the doorbell to enable it to be drilled onto our brick wall with the two screws provided. Once done the front was put back on and the very small screw was screwed into the bottom to hold it together. Then we stuck the "Push" sign provided above it on the wall. Looks really nice. The Receiver was plugged in and was very easy to set up (instructions were provided). Works very well and brightly flashes. Very pleased with the product.

Muy buen timbre, lo compré para un regalo y están encantados, lo pusieron en una parcela donde la casa está bastante lejos de la puerta y funciona sin ningún problema.