Chitu Systems Conjure Rigid Resin with Engineering-Like Features for Functional Gadgets Resin Printing,Low Shrinkage for Articulated Figure LCD 3D Printing (Black,1000g)

Until I used this stuff, I thought 3D resins were just chalky and brittle and not very useful for functional objects. It was a real eye-opener to try this resin!Prints come out sharp and detailed, like you'd expect from a standard resin, but are also really strong. I've had great print results and few failures with minimal effort.The parts take really well to sanding and paint, and seem more wear resistant than normal resins. It's still not as strong as a thermoplastic like ABS, (or maybe even PETG) but it's a big, big improvement.One of my favorite things about it is that the black is REALLY black. I've tried black resins that look transparent with thin parts. But this stuff is like ink, even the thinnest parts come out opaque. That does also make it pretty messy though. You have to be meticulous about cleaning your tank and build plate when switching resins.For some reason, the transparent blue color is rarely in stock and takes forever to ship, but if you can get it I highly recommend that as well. It seems to have the same mechanical properties as the opaque colors, with the benefit of looking extra cool.It is more viscous than standard resins, which is probably why they recommend printing at ~77F and above. I've been fine printing it in colder rooms, but it might be worth investing in a heater if you're using it in a garage in winter. It prints slow; I use 4.5 second layers on my Mars 2 Pro, where normal resins would be closer to 2 seconds.One thing to note, this resin has a weird reaction with alcohol. If it's left in too long, it gets overly flexible and will stay like that for a couple weeks until the alcohol evaporates (I guess?) and then it'll warp. I usually wash my parts for 3 minutes and pull them out as soon as possible.If you can justify the additional cost (about $40 for a kilogram right now) and don't mind the added print time, there really aren't many downsides with this resin.

This is my favorite resin out of all the resins I've used. I've purchased 6 bottles of this since February of this year. Its easy to print with, very strong and shows great details. I love the grey color. You will not be disappointed, just make sure to calibrate your settings. They have a configuration profile you can import into your slicer. I use Chitubox and the file imported right in with the resin configurations. It even has different color calibrations. I select the configuration for Conjure Rigid Grey and don't have to change any settings. Love it. Chitu is a great company. I use their resin, slicer and flex plate.

been using it for mechanical parts for over a month. good results for far! it can't bent a lil under pressure but wouldn't break. Great resin, very durable and flex with great ABS like results.

The media could not be loaded.  This black Rigid Resin is what it claims. It is durable, machinable and performed great during printing. I used it to make a detailed mechanical toy.Pros:Rigid and durable claim is spot on. I did a drop test at an 8 foot height to see if a print could take a hit. It absolutely can take a hit with minimal damage. See images.I had zero failures caused by the resin. It even mixed well with an ABS-like resin from another company with no problems.I was able to maintain small details and maintain toughness.It is very machinable. I was able to drill and tap a hole through in a peg that resulted in a 2mm thick wall and it’s holding very well with a screw through it. See images. I was also able to sand away some pock marks and raised areas caused by the supports with no problems.I really liked the bottle design and extra plug under the cap safety feature. Genius. I knock things over all the time and it’s awesome I have a solution to my clumsiness.Cons:The viscosity is higher than standard resins. In the liquid state, it is very difficult to clean up. The dye will stain surfaces and fabrics. This is not an issue though after a part is cured and hard, it does not stain when handled.There was some shrinkage in a part that was meant to be a tight friction fit peg (why I had to drill, tap and use screws) so watch your clearances and tolerances with parts that are meant to fit together.Conclusion:The Conjure Rigid Resin is awesome and I really loved it. It is perfect for highly detailed items that friction fit, mechanically fasten or snap together. Just be aware of how messy it can get.

I'm using the Conjure Rigid Black on my Phrozen Mini 8k and Mini 8kS. What I love is that it has great strength for bigger parts but small and fine parts retain some flexibility so they don't break. I'm able to print tiny buckles and clips for 1/6 figures that are functional without breaking. The resin also has a nice matte black finish so I can use it for black parts without having to paint them. This is definitely my go-to black resin now

Overall I'm very happy with this resin performance.It can be machined and drilled nicely while producing decent chips and don't cause cracking.Color kept its original bright white appearance even after curing and didn't received any noticeable yellow tint.On the mechanical side, the cured resin have a decent hardness values meanwhile not brittle.In regards to dimensional accuracy, I measured a minimal shrinkage of 0.5% to 0.8% and didn't notice any warping on parts printed directly on the print bed.the only drawback I noticed with this resin is that the surface quality isn't as crisp when compared to other resins that I used before (like Phrozen 250LV or eSun PLA Pro). Although I may need to dial in my exposure settings a bit more.Currently I'm using 3.5 sec normal exposure on Elegoo Saturn (1st gen)

Excellente résine, beaucoup plus solide que de la résine de type ABS. Facile a imprimer avec une Flashforge Foto 8.9, il suffit simplement de chauffer la pièce ou l'imprimante ce trouve a au moin 25 degré.

Doet wat het moet doen

Résine de très bonne qualité, très facile à imprimer.

Résine de qualité, solide et ne se rétracte quasiment pas !je recommande !

Las impresiones son impecables, no hay fallos. El rendimiento justifica la diferencia de precio.