Dual Vertically Stacked Monitor Desk Mount, Extra Tall Adjustable Stand for 2 Ultrawides up to 34 inches, 22 lbs Capacity, Black, STAND-V002T

This is one of the BEST items I've purchased recently. I'm extremely happy with my decision! The positive reviews gave me confidence to place an order; after installing it myself, I am not surprised by the 5 stars. This is a quality product with total package deal. I'm using this with a Monoprice IPS-ZERO-G Slim Monitor WQHD 2560x1440 , which came with a stand that wasn't so impressive that many complained about. With this stand accessory, it has given me a more reason to love that monitor as I'm able to adjust the height and tilt and even rotate the monitor into portrait mode! I love how my new setup looks and it really has saved me extra space. At first when I put on the monitor, since it's rather heavy, it kept tilting and I was worried if I wasn't able to adjust it properly; well, after REALLY REALLY tightening the screw with the wrench -- and I mean I REALLY had to tighten that thing -- I was able to securely put the monitor in place without tilting on its own. So don't give up and really put all your strength in tightening that screw. I found it easier to put the mount first and then sliding it on and tightening instead of the manual stating to slide it in and then mounting the monitor on the plate. I used the included screws that came with the VIVO package to mount my 27" Monoprice monitor; Not an issue with VIVO, but I'm a bit worried about that because screws that go in the monitor isn't that deep. I wish I could find the right size screw that would go into my monitor and mount without the screws protruding out; however, everything is holding up well. Pros: - Very solid build and support - Excellent instructions and all the necessary tools are included (except screw driver which most of us should have) - Cable management for a clean look - Tilt, rotation, and height adjustments! - Not that difficult to install - Saves you desk space and looks fantastic! Cons: - If your monitor is heavy and large, you'll really have to put extra strength in tightening that screw so it doesn't tilt on its own.

First the pros: This works really great! It's very well-made and sturdy when installed. The top to my computer cart is only 1/2" thick and the clamp does adjust down to that size. It holds securely without any problem. It did include a set of screws that fit my monitor (24" LG model 24EN33) just fine. they include some spacers and longer screws for monitors that are not flat on the back. There are 2 vesa mounts that clamp to the pole and the adjustment tools for clamp tension and mount angle are included in the package. The pole is from base to top is 28 1/2" and the clamps will tighten anywhere along that axis. I received this product from Amazon very quickly and it installs quickly as well! Cons: I really have nothing bad to say about this product or the shipping service from Amazon either. My only problem is that I wear bifocals and did not realize that a side-by-side configuration would work better for my home workstation. the top monitor is too high for me to read well but is great for training and instructional videos. I will be moving this to a lab at work and replace my home setup with a side-by-side. The only other problem I had was that one of my old monitors isn't Vesa ready. Yes, this is a no-brainer and I had planned to replace it anyway but if you are buying any kind of Vesa stand our mount remember to check this first!

An enormous surprise, the Vivo V002T is much heavier duty, substantial, and impressive than any of the photos on Amazon (or videos on Vivo's website) would suggest. The dimension of the central pipe is thick, the dual desk clamps are each very large, and the Vesa attachments are extremely well made and heavy. Wow! This is a serious piece of gear. I have 2 LG 29UM58 Ultrawide monitors on my desk in a side by side arrangement with the original stands. I use this setup for financial transactions and related work, but I need more visual real estate for data and graphs, etc., so I'm adding a third and possibly fourth monitor. I'll still have two side by side monitors, but now these will be mounted on two of the Vivo V002T stands, with two more monitors stacked on top of these for a total of four monitors. I was considering another Vivo vertical 2 monitor stand, the similar The Vivo V002R, and didn't know which to purchase, so I emailed Vivo tech help and they suggested the Vivo V002T because the pole is 28.5" tall from the base of the desk to it's tip, and won't stick out above the top of the top monitor like the V002R which is 31.5" tall. This is just an aesthetic choice. (My monitors are wide but only 12 5/8" tall and I don't need the very long pole of the V002R. You need to measure your monitor height, double it, add the distance off the desk surface of your bottom monitor and the distance between your lower and upper monitor if any, and then subtract the distance from the top of your top monitor to the center of the Vesa mount to understand how tall of a pole you need. It's confusing at first, but that's life!) The Vivo folks also said the V002T will keep the monitors a little closer to the back of my work table, taking up less work space. This has to do with the distance from the center pole to the front of the Vesa plates (it's apparently a shorter distance with the V002T.) Other than that the tech folks said that both models were equally easy to adjust and install. Since I don't have a V002R to compare these to, I can't comment on that. Overall, I couldn't be happier. These are very well made and solid. Today, that's the exception, not the rule. Bravo!

I recently purchased this vertical stacked monitor stand for my two 34-inch ultrawide monitors, and I'm thoroughly impressed with its sturdiness and build quality. The components lock together tightly, providing a solid foundation for my displays. The desk clamp is secure and doesn't move, even when holding heavier monitors. The stand has successfully held both my lighter OLED and heavier LCD monitor securely, with the older LCD monitor on top as an auxiliary screen. I've adjusted the angle of the top monitor to find a comfortable viewing position, but unfortunately, this compromise means that the screens don't line up as neatly as I'd like. While both brackets are designed to fit standard VESA mounts, their identical length means that even with two identical monitors angled at different heights, it's challenging to achieve a seamless flow above my head. With the top monitor tilted down, and the lower monitor flat, there is an awkward visual offset, detracting from the overall aesthetic of the setup. One feature that would greatly enhance the stand's flexibility and usability would be an extended bracket for the top mounted monitor. This would enable users like me to avoid this design challenge while still showcasing both monitors in their optimal configuration. In summary, I highly recommend this stacked monitor stand for its sturdiness, build quality, and functionality. However, if you value aesthetics or want a more flexible setup, you may want to look into additional accessories or consider alternative stands with improved design flexibility. Pros: Sturdy construction Components lock together tightly Secure desk clamp Holds even heavy monitors securely Cons: Minor design quirk in monitor placement - the two screens don't flow nicely above my head due to the identical bracket length and angled positioning. Overall, I'm pleased with my purchase, but the potential for improvement in this regard is a drawback that prevents me from giving it a full 5-star rating.

This vertical dual monitor stand is just what I wanted. It was a little tall for my application but in two minutes with a hack saw I was able to take about six inches off the top and with the supplied cap you can't even tell it's been shortened. The stand comes in pieces in a box but assembly is straight forward with a little common sense (or UNcommon sense as it seems to be these days). the "C" clamp style mount is heavy duty and would offer a very sturdy set up and is easy to torque down by hand with the large heavy duty three sided plastic handle on the screw of the clamp. The stand also includes a base plate and a support plate for mounting stand directly to the table by drilling a 7/16" hole. I mounted two 22" monitors to my desk in about a 1/2 hour. I did need a #2 phillips screw driver to remove the main screw from the pre-assembled "C" clamp and a drill with a 7/16" drill bit. The bottom main tube of the stand has a threaded insert to accept the main screw of the "C" clamp for this type of mounting set up. All-in-all this is a nice, very sturdy stand and although I slightly modified it to fit my application I would not hesitate to order another one.

I have two Asus monitors, a 27 inch main and 24 inch adjacent monitor. I was worried about the second monitor being too high, but with tilting the top monitor downward, dialing in both monitors to the proper height, and adjusting chair height, it’s honestly the perfect setup. I don’t feel strained looking at the top monitor, and my primary monitor sits just a bit below what I’m used to (Nothing too drastic). The mount is rock solid, worth the price and perfect for anyone curious on a dual vertical monitor setup. A couple negatives: my overall setup looks very bulky with this orientation, and you can’t freely move the monitors up and down the pole easily as they are tightened and clamped into one set spot. Wouldn’t be moving them at all anyway, but worth pointing out.

Hold great. No wobbling, great metal quality, good height adjustments, nice sleek black finish, holds my 32” LG great.

So happy with this stand. It was relatively easy to set up, basically the same as any other mount. Switching from a dual mount with extendable arms, this is much more stable and I get absolutely no screen shake, which was one of my biggest worries. I did add a metal reinforcement plate to avoid damaging my desk even more, but the combination of both is just perfect.