CeKay Outdoor Antenna/Weather Station Adjustable Mounting Pole with Extension Universal Mount Brackets - Easy Installation, Solid Structure, Weather Proof (1" Diameter, 49 1/2" Arm Length)

Easy to put together, Parts and instruction were easy to follow, plenty of options. Worked great with the compact directional TV antenna I purchaced. It could handle Wi-fi or smaller VHF/ UHF antennas Like Amateur, GMRS/FRS, small scanner antenna.

It's holding up my Rotary Antenna with no problem and it has been for a long time now, at least a year or more. It also turns without any problems.

Fantastic for my purposes! I needed to raise my antenna up a few feet and this did the trick. Now I get great reception. One point to remember - after you install your antenna you need to adjust it by twisting it to where you get the best reception. I am going to buy this again for another antenna I'm putting up.

Was able to install this onto the side of my garage. I am still waiting on my antennas but the mount option is good. I would advise having a 10mm wrench for this project. Overall it is simple and has the ability to extend with its accessories. My only concern is that there is a wiggle between the mast and the pole, I say if you use washers on the inside of the mount, it might remove the wiggle. Will update the review, if it doesn't last though a high-wind storm.

Right after I installed the weather station on top of the roof with this pole we received some of the highest winds of the year with gusts up to 60mph as per Weather station reporting and it stood up! I am thinking of adding steel tension cables later this summer just to never worry about it for years to come but honestly it is surprisingly good. Some feedback to the manufacturer: in US most roofs have wooden rafters (beams) of 2 inch width every 24 inches, the mounting plate you have allows mounting one side of the plate to the rafter but the other one just sticks through shingles because 2 inch width is not enough. I'm sure there is some exoskeleton design that can deal with this, please consider updating it!

I will use this as a mount for a Discone Antenna for my scanner. The internal pipe is large enough to pass a PL259 or UHF N connector through the inside of the tube with ease. I would not use a larger coaxial cable that RG-58/59 or 8X as an example. The reason is the bolts used to secure the sections together pass through the middle of the pipe. So make sure you run you cable and connectors through before you assemble the sections. The pipe is small but the pipe walls are thick so it provides adequate support for most compact antennas...j

Lightly built but easy to install.

Antenna bracket is easy to install and works very well.