Coavas Window Privacy Film Frosted Glass Static Clings, Decorative Bathroom Door Window Covers Day and Night, Heat UV Blocking Anti-Glare Frosting Stickers for Christmas, 29.5 x 157.5 Inch, Pure

We have clear partitions in my office. I end up making eye contact with EVERY person who walks by, and I am easily distracted. This gives some privacy, while sill allowing light to pass through. I use it to manage my ADD and keep myself focused on my work. It's a cheap fix and a good product. The installation was straight forward. Just take your time working out all of the bubbles. You can trim the excess with a knife / scissors later (the next day), after it dries.

The film looks exactly as shown. Good color and opacity. Lots of light coming in, but unable to see through it. Installation took 15 minutes and no issues with adhesion yet. Looks great! 👍🏻

I have applied my share of window films and due to issues experienced with most, wasn’t looking forward to applying this one on a glass exterior door. Surprise, surprise, after throughly dousing the window and the film, I applied it starting at the top and worked out the bubbles as I moved down. No issues, easy to apply and the bubbles came out very easily with a plastic baking tool that looks like a scraper. Trimming it was very easy using a broad bladed scraper held against the inside edge and cutting with a utility knife with a new blade. I applied a frosted film to the window and it now has a classy look. As long as the film doesn’t dry and begin peeling off, I’ll be a happy camper. I like how it subdues the glare on the floor from the sun yet allows plenty of light into the hallway. The last photo I took reveals that at the top, it may be coming lose as it dries. I may contact customer service to get their take on what could be done. I had to deduct 1 star due to this.

I used the Coavas Window Privacy Film for my bathroom window, and I’m really happy with how it turned out. It gives the glass a nice frosted look that still lets in plenty of light while keeping the space private. The best part was how easy it was to apply no glue, just a little water and it sticks right on. I was able to adjust it a few times without any mess. It also helps cut down on glare and heat during the day. Overall, it makes my bathroom feel brighter, cozier, and a bit more stylish. Definitely worth it!

Does a very good job letting light in without people seeing you. Used frosted in 2 bathrooms and the film was of a nice weight (does not tear). It was easy to install and has stayed tightly adhered to the window. With blinds it is impossible to even see your shadow. INSTALLATION TIP: After cutting it to a little larger than the glass we were adhering it to, I put frosted side on the flat wall. (after rubbing it to make it flat, it stuck using static cling). Then we peeled off the film. While still clinging to the wall, I used a rag and dipped it into a cereal bowl with a mixture of warm water and some dish detergent. Then, wetted the window and privacy film. It should be almost dripping wet. Then pulled the film off the wall and put it on the window. If you line up 2 sides it is easier. You'll only have to trim the other 2 sides. If someone can help you it will be easier also since the film tends to slide when cutting to size. Use a very sharp razor blade!

I was hesitant to buy this off of Amazon, because I was wondering what condition it would arrive in. It arrived in perfect condition with no dents or any Cosmetic damage, so I was happy. Installation was not toohard my husband was able to do it. WORKED GREAT HOWEVER , after about 10 days we began getting an E4 Error code. No leaks, no blockages, no water in the tank. We could not figure what it was so according to the manual, it said to call the service center which we did today which is January 15. Just sent them proof of purchase, the serial number and error code photo. We have tried resetting the circuit board without luck. She could not tell us how to reset the error code. We tried to look it up online. No specific instructions for this model but most said turn the power off for 15 minutes and then press the start button for three to five seconds which we did but did not work. We tried the same thing using only the power button did not work. We tried the same thing using both power and start at the same time too No luck. Awaiting next steps from MIDEA. Repair man coming next week.

This worked so great. Recently bought a house and I didn't want to spend the money on buying frosted windows, so I bought this frosted film and to me it worked just as good and it was sooo much cheAPER. The adhesion was great and easy to install, just measure properly. The fit is perfect and a roll let me do 3 windows so I bout two rolls. I frosted my bathroom window so it keeps the haat out, but also still allows the sun and light to come in.

I had to do something to get some privacy with 18 individual window panes on an exterior door. But I didn’t want to lose the light, as those windows are the only ones on that side of the room. After reading reviews here, I chose the white film. I made a template of the window size with paper and traced it onto the back of the film, then cut. When cutting, I tried to get as close to the actual dimension of the window rather than leaving much extra because I find it kind of hard to trim it on the window after applying it. I cleaned each window with rubbing alcohol. Then I did the *hardest* part - getting the backing off the film. Took forever!! Finally figured out that it was a bit easier if I kind of roughed up an edge by scratching my fingernail along it. I had bought a small supply kit for applying the film, and it turned out to be invaluable. It came with a small spray bottle, a plastic scraper, and a small squeegee. In the spray bottle, I put water, some white vinegar, and a squeeze of dish soap. I applied that liberally to the window before applying the film. I directed the spray specifically at the top edges of the window, the top corners, and the side edges, then some sprays in the middle. Applying the film was easy. The scraper from my kit did a great job. The squeegee was surprisingly helpful on some bubbles that the scraper didn’t get. Sometimes I needed to switch up the tools on the same spot, just rotate through them. I was able to get all the bubbles out, or nearly all. I tested the windows out for privacy at night and the white film is great. Can’t see inside the room. I applied it at night so I haven’t seen the daylight effect, but I did see how much interior light was visible outside when I was testing for privacy. It showed a nice glow, so I think the sunlight will come through nicely. I’m not handy, but I was able to do this. If you get your tools together, measure carefully, use water/vinegar/dishsoap liberally, have a couple different scraper/squeegee things for getting out the bubbles, and have a little patience, you can do this! 4 stars because I don’t know about longevity, but I’m thrilled with how it turned out on Day 1.