SchluterSystems KST965/1525S Kerdi Offset Outlet Shower Tray 38"x60"

This worked great for my walk in shower. Easy to cut and fit... The most important thing is to make sure your drain hole and the hole of the pan match perfectly. If you mess up or have a gap at your edge do not worry! you can pack it in with mortar then place membrane on top of it that overlaps an inch of the shower pan, just remember your 1/4 inch per foot slope.Below are the steps I took but before that I wanted to answer some questions you may have but you cannot find answers to (yet) on the internetDo you need to use the Schluter foam for the walls or their foam barrier? No this works as a regular shower pan, I do recommend buying the same brand drain kit... Others will work but their brand is comparably priced, fits perfect, and it comes with Schluter brand membrane covers for the drain and for your faucets.For the walls and barrier: I decided to save some money and just do the walls framed with treated 2x4's cover the frame with mold proof backerboard (1/4 inch) covered them with the mesh membrane (cheaper to buy from Amazon) using liquid membrane from Home Depot to adhere the mesh membrane to the BackerboardFor the shower pan:1. I dry fit and cut the pan2. Added a layer of mortar to adhere the pan to my baseboard using the recommended trowel and pressed the pan into my baseboard3. filled in my edge gaps with mortar then added a membrane on the newly added mortar to overlap an inch over the pan. (liquid membrane as the glue then added mesh membrane on top.)4. Tiled my bedpan, when I got to the drain, used the foam template given to fit it, then packed mud under the drain and pressed it in so I had a proper fit, then tiled under it while the mortar was still setting under the drain so I could adjust the drain based off the tile.I hope this helps someone!

This is a fine shower base. The entire schluter line seems to be very high quality and very functional. This was relatively easy to cut and fit in my shower area. I appreciate that it has the slope built in. I didn't want to guess and try to get that right with dry pack mortar. Worked well with the rest of my schluter stuff also.

Great product. Light and easy. Had to trim to size for our use but was not a problem.

Great product!