Pro-Seal Instant Adhesive, 0.01/0.02 fl. oz., Clear, .04 Ounce (61067)

Worked as advertised. Instructions were clear, prepped the window, worked well to place the cleaner/activator, a little glue, pressure for 30 seconds, voila! Stuck there overnight to fully harden and placed mirror. We will see how long it lasts but showing no signs of issues in the first few weeks.Good luck with your mirror!

This product flat out works and was really inexpensive compared to other adhesives. There were many complaints, but I believe those people did not know how to use the product. The instructions were bad.1) clean off old residue on both windshield and the metal part of the rearview mirror with acetone. Let it dry. Use Glass Plus or other window cleaner afterwards and let it dry.2) Do not try to install the rearview mirror as a whole assembly. Remove the metal attachment that is attached by a screw.3) Make sure the orientation of that metal attachment is correct! Otherwise your rearview mirror will be upside down when you reattach it.4) Then just follow the directions. Reposition the white paper cover of the activator tube to its other end. Crack the glass to soak the applicator sponge within the activator tube. Apply the activator (wet sponge end) to both the metal side of the metal attachment that will attach to the windshield, as well as, the corresponding area of the windshield. Wait one minute.Meanwhile compress the plastic adhesive tube repeatedly to mix it. Tear open the adhesive tube. Apply five small drops only to the metal side of the metal attachment that will attach to the windshield. Do not apply the adhesive to the glass.Then press the metal attachment to the windshield and hold for one - two minutes tightly. Wait overnight.Put the rearview mirror assembly on to that metal attachment and screw it back on.The adhesive works as intended.

Followed the directions to the T. Even waited a little longer to attach the mirror due to being in the Florida heat. Put the adhesive on at night time so that the window was cool and waited two days before I put the mirror on it still fell of the window 2 seconds after the mirror was hung. Did not cost much now I know why. Product is junk. Went to a local Autozone same day, should have done that in the first place, bought a similar but different product and it worked perfectly. Did the same thing as the first one. Cleaned appropriately, put the adhesive on at night, waited the same amount of time, and this time it stayed.

Used to but my rear view mirror back on in my car back in September and it's still holding great! For sure buying again if I ever need it!

Didn’t work for me. Put it on at night and the next morning with the mirror on and it fell. Super glue by itself fixed it, so far and it’s been a month

Works as advertised. Be sure to clean windshield mounting surface thoroughly with rubbing alcohol or similar before using. I also used a flat file to dress the metal mounting tab that came with the mirror I mounted (made sure the mounting surface of the tab was very flat for maximum surface area). Use this product on a warm windshield. It's held well for several weeks and I expect it to keep doing so. My only complaint is that there's enough resin and hardener for several mountings, but no way to save the unused portion.

My rear view mirror fell off. Bummer. It looked like the back of the mirror had a circle of metal foil of something that was still attached to the glass, while the mirror was just solid metal. And this stuff looked like it would do the job.And it did. I smeared one of the tubes all over one side, then mixed in the other tube. Held the mirror in place for about 10 minutes (wasn't fun), let go - and it didn't fall. The next day, taking the car out for a drive, I didn't even think about being gentle before adjusting the mirror, and everything stayed on perfectly.So, the 6 or 7 bucks did the job. Recommended.

Worked great on first try

Did not work following instructions.

I am a motor engineer and i have used this a few times on mine and customers cars. This is the best mirror glue you can buy but you must follow the instructions carefully, it's important!Maybe follow the tutorial on you tube, but it's easy to use.Use it on a warm windscreen not in a cold place.It is a good product.

Waste of time! Followed the instructions to a T wouldn't stick held it for about 15 minutes till my arm got fed up. The glue was still as runny as when I put it on the glass, I wouldn't recommend this product. Found an old tube of clear silicone sealer in the depths of the shed and used that instead.......... it is still attached to the windscreen now 'result'

Follow the instructions step by step,it's great

It is so easy to apply. Clear instructions. I used it to stick my main rear view mirror. I did it when it was extremely cold outside. I put my car heater on, cleaned my wind screen and the metal piece of the mirror to be stuck on it. Remeber to make small grooves on the surface of that metal piece as adhesive will not work properly on smooth surfaces. It has been more than a month since I stuck my mirror and it is absolutely dead solid and strong. On top of that it is so cheap. to buy.