BTF-LIGHTING 5050 RGBW RGB+Warm White (2700K-3000K) 4 Colors in 1 LED 5m 16.4ft 60LEDs/m Multi-Colored LED Tape Lights IP30 Non-Waterproof White 12mm PCB DC12V for Bedroom Kitchen Home Decoration

Funcionan muy bien pero la app de smart life esta muy limitada en las escenas. Acabo de comprar una govee m1 y muchisimo mas versatil y ya con el controlador, eliminador y app incluido. Lo unico que extraño en la govee son las automatizaciones directamente con los switches en smart life

I bought these 5050 RGBW LEDs along with aBTF-LIGHTING AC100-240V to DC12V6A power supply and aBTF-LIGHTING Zigbee 3.0 C04Z LED Controller for RGBW, after lots of research and a certain amount of educated guessing, and that combination worked flawlessly for me out of the box.The LEDs come with a cable that connects the pin sockets on the end of the strip to individual wires suitable for insertion into the controller. When inserting each wire, pay attention to the wire color! The order of red and green is switched on the controller relative to the pin order on the LED strip, so you'll need to cross-wire the wires. The colors of the wires in the cable that comes with the LED strip matches the pin order on the strip, so just attach the red wire to the "R" socket on the controller and the green wire to the "G" socket, and you'll be fine (unless you're red-green colorblind, in which case, best of luck!). The controller also comes with two sockets marked V+ (power). Attach the black wire to one of them and leave the other one empty. This advice probably applies to their RGBW controller that has a remote control too, but I can't say for sure.If nothing happens when you plug it in, make sure the plug between the wall socket and the power brick is firmly inserted. It took a fair bit of persuasion for me to get it fully seated.Anyway, on to the actual review: the LEDs are spaced close together on the strip, which is good since it makes it easier for the light to diffuse and be less spotty. I was pleasantly surprised to see that there are cut points every three LEDs, which makes it possible to cut the strip to almost any length you want. These cut points do seem to be natural places for the cable to crimp when unwound, though, so be a little careful playing with them before you attach them to something.The colors are pretty spectacular. I can produce a warm, pure, or cool white with these, plus vibrant saturated colors, and the hue stays pretty consistent even as I lower the brightness almost to nothing. The colors produced also match what the app shows, unlike some cheap smart light bulbs I've bought on Amazon in the past. The maximum brightness is very bright indeed.All in all, these lights work exactly as they're supposed to, they're well-made, and setup was way less of a hassle than I anticipated.

Striscia led 5 mt. rgbww conforma a quanto in descrizione. Funziona bene. L'unica modifica che ho fatto è taglarla in due ed alimentare individualmente i due tronconi da 2,5 mt per evitare cadute di tensione e quindi variazioni di tonalità. Il biadesivo sotto alla striscia non è particolarmente forte ma comunque sufficiente. La consiglio

Previously I’ve used RGBW tape that alternated RGB LEDs with white. This tape is a significant improvement. It has the same LED density as those tapes I’ve used in the past, but each LED can be RGB or white. This results in higher light output and better blending of the individual light sources. Adhesive tape was very strong.

I have this stuck round the back of my tv and the brightness is far better and it produces colours like orange to match my fire (See image with Orange set at 30% brightness) loads better than other cheaper led strips and the RGB white (when blue red & green are all on together) is nice and white unlike the blue colour you get from the cheaper LED strips. I bought this because I wanted a really nice white, but if I’m honest a good quality LED strip produces a good enough white without being 5 pin with a separate white. I’m not sure if you can access the separate white without using the app, as if you ask Google/Alexa to change the colour to white it will use the RGB 255/255/255 white instead of the separate white. This is worth the extra money but be warned if you have other cheap LED strips in the same room It will make you want to upgrade them.