Single Monitor Stand Freestanding 27-43 Inch Monitor Arm Curved Screen Monitor Mount Tempered Glass Base Adjustable Motion Tilt -15° to 10° Swivel ±45° Rotation 360° Weight Capacity 77lbs HT05B-003

This is a great stand. Sturdy. All metal and glass base with little rubber legs. It holds curved 32" Samsung display, no problem. The screan can be tilted up and down, left and right, and it can also twist, so you can set your screen in landscape or portate position. You can also readily detach the screen from the stand, because the mount has hooks that simply go into the holes on the stand. So you can really move it higher or lower at any time. There are clips on the back if the stand, which hold wires hidden from top to bottom. I really like this stand, it looks minimalictic and clean, and holds pretty heavy large display. I liked it that much that I bought another one just like this one from the same company, but for 2 displays where 1 dusplay sits over the other (not side by side). I really like that one too. It's exactly the same one but has more holes in the stand and 2 mounts, instead of one. It was very easy to put together, they included LOTS of different types of screws, so you will find ones that work for your display with no problem. The mount that screws to the display has mounting holes with different distances in between, so it can hold displays with 3 different mounting hole placements. I can't think of anything negative to say about this stand. It works really good for me and I would highly recommend this mount to anyone.

I bought this to mount a 27" imac. The imac needs an adapter. The one I used is this one:VIVO Adapter VESA Mount Kit, Bracket Set for Apple 21.5 inch and 27 inch iMac, Late 2009 to 2020 Models, LED Display Computer, Stand-MACB The main reason for this set up is that I need to turn my imac to portrait mode and back to horizontal quickly and easily. It's sturdy and easy to assemble. If you are doing the 27" imac setup and need to turn 90 degrees, use the 6th and seventh set of notches from the top of the stand. One thing that helped keep it stable and aided in its ability to turn easily was to really tighten all the bolts. Tilt the plate to where it's as far back as it can go, opposite of tilting forward, then REALLY TIGHTEN THE BOLTS. I suggest having someone help lift and place the plate into the notches.

Pictures referenced in this review: 1) included parts list 2) included hardware list for mounting VESA plate 3) extra hardware leftover from our install 4) inadequate cable guide 5) cable routing 6) vertical support measurement, 26" from the base. This TV/monitor stand is almost perfect. The only negatives about this stand are very minor. One being the glass base, which is a dust and fingerprint magnet. This is a purely personal, cosmetic opinion, though. Functionally, the base works perfectly well. I would have preferred a different material, but wanted a stand with a lot of height adjustment, and this stand definitely fits the bill. The 2nd minor issue is the included plastic cable guides. The one at the bottom is fine, because the cables don't move around in it. The top guide, though, since they are just plastic, and only use tension to stay closed, can't hold the cables when the panel is being swiveled side to side. The cables are so thick, even leaving extra length doesn't help, and they bend the cable guide (see pictures 4 & 5) I replaced it with a regular cable tie before it broke completely. Other than those minor issues, this is a very heavy duty stand, with a lot of height adjustment, plus tilt and swivel. It was very simple to put together, and very quick. It comes with a tool for assembly, so you don't need any other tools. The hardware that holds everything together is huge, I would trust this stand to hold a much heavier panel, easily. Once the stand is assembled, and the panel mounted, the swivel feature is effortless, and has a wide range of motion. Tilt works with a thumb screw, which is simple, but strong enough to easily hold our monitor at the angle we set it. There is about 15° of tilt adjustment, up or down. Height adjustment requires removing the panel with attached VESA plate from the vertical support, by lifting up, then out, and then hooking it in the appropriate height slots. If you've routed the cables, you'll probably to readjust them after adjusting the height. Cable management is good, but not great. The rubber feet on the bottom of the base raises it up high enough to run the cables underneath it, to the vertical support, which is nice. The bottom cable guide works well, and holds the cables close to the vertical support. (See picture 5) the top cable guide, however, I had to replace with a cable tie. I am satisfied with the cable routing, though, it looks organized enough to me, even not being able to use the top cable guide. Overall, I am very happy with this purchase. This stand does what we want it to do well, which was to add a large amount of height adjustment, while keeping the tilt and swivel features of the original monitor stand. Most monitor stands advertised for a 24" monitor (what we're using) only have about 5" of height adjustment. We weren't satisfied with only 5", so I picked this one, even though it's recommended for 27" panels or larger. Our 24" monitor mounted to it just fine, though, so I'm not sure why they state 27" as the smallest panel for this stand. I would recommend this for anyone looking for an inexpensive, heavy duty stand, or for much more height adjustment than is available on most stands for smaller monitors.

This thing is a monster of stability. I am using it for my 32" computer monitor, even though it is designed more for TVs. It is very sturdy and well made. Easy to put together. It is not at all prone to tipping. I keep my monitor on a rolling cart and move it around all day. Not a hint of movement or tipping. The lowest bracket for mounting your monitor or TV is pretty high. The lowest bracket is a few inches higher than my old stand. I decided to see if I'd adjust to the new height, especially paying attention to my neck. This is actually an improvement, my neck feels better. It is ergonomically ideal for me. Before ordering, I suggest measuring your current stand and compare to the dimensions given in the product description. Rotate and swivel are excellent and can be adjusted with just the push of a fingertip. The tilt must be adjusted with a screw and cannot easily be adjusted. You need to adjust it carefully, because it will stay that way until you unscrew it, adjust it and screw it tight again. Overall, very good product.

Amazing stand: very sturdy, fairly straight forward to assemble, visually and functionally a nice upgrade and worth the resources. Fits my ultrawide monitor and workspace perfectly. Feels stable, reliable, and well designed overall. I appreciate the finish of the metal and components as well.

Why did you pick this product vs others?: This is an amazing product! The stand is very sturdy and allows for vertical monitor placement. My wife and I assembled each one and connected them to my monitors in about 10 minutes. I highly recommend this monitor stand! Tilt angle: The tilt angle is also great easy to move and see my monitors while using this stand. Value for money: Great value for money.

Actually very awesome stand. I highly recommend. I was able to assemble it without any issues. Has been sturdy so far.

I have a 34 inch monitor, that is bit too "wide" for my home office desk (I have audio speakers & laptop stand on as well), I wanted to buy a stand where I can raise my 34 inch monitor high enough so my speakers can be placed under it, I tried couple of "bendy" arm stands, cause only those could raise monitor enough for my desired setup, but then I started running into another problem. My desk is very close to the wall and the bendy arm stands pushes against the wall, scraping it and the monitor sits very close to your face. I needed a free-standing adjustable stand that is not ugly looking, after trying several options (and stack of books), I found this stand, and I think there is only one of this kind in this price range, its built very nice, very clean, the glass base gives it very elegant look, all hardware, metal joins are build to the best quality you'd expect from stands that are 4 times this price. You get extra hardware to mount your monitor, so no guessing if your VESA has right size holes to match the screws/bolts provided, actually let me copy exact lines from assembly instructions that came with this stand "We try my best to offer the gratis TV installation bag which is suitable for the whole of TV models in USA, in fact as you know there are so many kinds of TV catalog please accept my apology in case your TV cant match it successfully" Forget about grammar mistakes, this shows the sincerity of manufacturer to provide all installation bolts possible to satisfy the install, also I loved the "please accept my apology" part, they are clearly a small shop and this genuinely makes you feel close to the seller Now here is a twist to this review, I will be returning this stand, there is absolutely nothing wrong with it, I tried keeping it but really cant use it, I needed 8.5 inch clearance for my studio monitors to be under the monitor, this gives me between 4.5" and 15.5", way more than I need, but after 2 days of usage I got cramp in my neck, I realize I need bigger desk not taller stand :( But regardless I wanted to leave honest review for anyone who is looking for taller stand, please give these guys a chance disclaimer: this review was not written out of guilt, I genuinely loved this product