Erfoni 17.7"x 394" Brown Faux Wood Peel and Stick Wallpaper Wood Look Self Adhesive Wallpaper Rustic Removable Wood Contact Paper DIY Waterproof Wall Paper for Desk Countertops Decor

I love this product! I’m surprised how good this looks and how easy it is to work with! Looks like real wood! The roll doesn’t look like real wood but when it’s on it looks amazing!! I’m really happy with this product!!

adhesive is not super strong! But it’s okay! But paper is thick strong

I had very cynical expectations for the quality of this product, specifically because it was so affordable for a decent sized roll of this peel and stick pattern. However, after using it, I was pleasantly surprised at how easy it was to use and how durable the material seemed. It wasn’t super thin material, it was easy to work out the bubbles in the adhesive, and it had a nice color wood tone pattern that appeared tasteful and not tacky looking. I’ll see how it holds up with water and maintaining its adhesion after everyday use, and that will be the real challenge with maintaining this look for an extended period of time. Also, PREPPING YOUR SURFACE WELL is a monumental first step in this process if you want to have any success with applying this product. If the surface is at all dirty, even if it doesn’t appear to have any visible dirt, clean it down anyways, and wipe it on the top and along the edges and underneath the edge on the bottom of the surface. This way the pattern can adhere well to all sides when you have to fold the paper over when covering up corners of an item’s surface.

Phenomenal, sticks well, which is so important!! Great finish look. Wish there was more wood finish options :( Will purchase again! Note, the feet on table I refinished, does NOT have the wrap, thats why the don't match. I used the wrap on the table top and front drawer. Then outlined the wood on front drawer with gold paint.

Ease of use: Easy to work with. It was my first time to wallpaper and I knew this would be a challenge because I am picky about details and I wanted to go edge to to edge without overlap or gaps. It went on perfect. I can slide anything across the desk and there's no bumps. Appearance: It took me a really long time to find a good rustic look that fit the theme/feel/style of the creative and office space I'm setting up. I absolutely hate to see patterns in organic designs, or when people use the rubber-stamp tool in photoshop (former 3D guy here who specializes in procedural textures so it's a pet peeve,plus that's annoying ugly) the pattern repeats about 5 feet. This is long enough to flip and slide to prevent a tiled look. If you shipped well papers or laminates you can see the obvious tiles on the walls. It looks cheesy. Plus, watch out because those are not photos, those are texture mapped and/or photoshopped in and they do not have an accurate scale they try to make it bigger or block the repeated patterns. To be sure, look at the user photos and video and there's the truth. There is a woodgrain pattern pressed into the vinyl. When the sun hits the desk the shine subtly adds to the believability factor. They did a great job with printing. It's not just 3 colors it's well blended photo like. Hours of searching for a workshop type of rustic wood look, that didn't have unique "that's the same blue board", or a pattern that tiles every 17 inches, was quite a challenge. Next time I need a faux wood to test something before commiting to real wood, I'll look up this brand and order again. Tips: to separate the vinyl from the backing, stick tape on the paper backing half on the paper and half off, at the corner and at 45 degrees do the paper corner is pointing along the tape's length. Pull the excess tab of tap back and it peels right off. It peals easy and it has great stick to my desktop. Your surface may very. I found it if it started to drift away from the previous piece that was laid down in and start to form a gap, the best practice seem to be not pulling it towards the other one but rather working the air bubbles out from the far side of the seam towards the seam. You definitely don't want to pull and stretch this stuff because eventually down the road it will want to pull itself back into shape and it will develop wrinkles or bubbles where it was stretched. To trim the excess vinyl off the desk edges, use an Exacto knife with a brand new blade. Run the blad along the edge withe the grain so it doesn't dig in. Have the broadside of the blade evenly on the edge of the desk. Tilt the handles so that it's leaning over the desk. As you pull the blade along the edge slowly raise and lower the blade like a slow motion sawing motion otherwise it will wear out one spot in the blade and eventually snag. My desk has camperd corners so I had My knife had an extreme angle so that it wouldn't get a lip of vinyl to snag and eventually peel. I've seen some videos where people ran their fingers along the edge of their furniture that they applied a vinyl and complain because they could snag and peel it back... That's their own fault for not trimming it properly. That's not a fault of the vinyl laminate or wallpaper. My desk is 9 ft long, so to have perfect edge to edge (I'm referring to the edge of the roll of vinyl, not the desk surface) without any overlap or gap, was more challenging than a shorter span desk, because if you're off a little bit early it will be off a lot by the time I got to the other end. But it worked out quite well with this. Results: My desk is a real wood desk (IKEA Galant from 2005) and I was going to build my own rustic authentic wood surface to replace it, but this test turned out so well I'll keep it on for a couple year and focus on other home projects! I like it! A LOT! I hope this helps everybody, as you can see it's a quality laminate. I would like to see this company make more colors and textures as options. Not just colorizing the existing texture, but to come up with different types of saw marks or knots, different wood types etc.

This paper isn’t sticky at all. I put it up and it started coming off about thirty minutes later. I went to Hobby Lobby and bought something called tackey spray and now it’s perfect. It’s easier just to spray the wall then put the paper up. It’s so pretty now. Just be prepared with adhesive spray so it’s not so stressful. I was also very shocked about how much was on a roll. There’s allot on a roll, so I had a roll and a half left over. I will definitely purchase again if I ever need to. It’s great quality except the stickiness. The paper is thick and it doesn’t rip while putting it up.

I used this to wrap a wood beam across my living room that had sadly been painted white by the previous owner. Did the trick! Pretty easy to apply, but does rip easily. Really simple to match up, and gives you wiggle room with the pattern that it doesn’t have to be perfect.

El diseño es bonito y también el color...PERO PÉSIMA CALIDAD NO LO COMPREN, SE QUIEBRA, SE RAJA, SE ROMPE Y SE DESPEGA CASI INMEDIATAMENTE.

Thin will be damaged easily and melted fast

It’s hard to judge the colour based on photos but this was the closest to what I was searching for. It arrived quickly and I was a bit concerned when I saw the product as it looked a little cheap, however, once I applied it to my project, it looked so much better. It was easy to apply and it’s been up for a week with no issues. Very pleased as it’s exactly what I had envisioned.