Jandy Genuine Parts Neverlube 2"- 2 1/2", Positive Seal 3 Port Valve, 4717

Perfect fit, Jandy make quality stuff. I don't use cheap knock offs.

No surprises here — the quality is excellent, just as expected from Jandy. It was easy to install and works perfectly with the actuator. Fit 2" pipes.

For some reason my pool builder didn't put a shutoff valve on the main drain line. I didn't realize I needed one until I started learning about vacuuming the pool floor. Rather than waiting for the pool builder to have some time to install it for me, I ordered a Jandy valve and took on the job myself. It was a pretty simple job. The only challenge was figuring out a way to keep the water from the drain line away from the area where the new valve was to be installed. For that I used a balloon attached with a thin hose zip tied to it. By blocking the water, I was able to keep the work area clean and dry. When the cpvc cement dried, I simply let the air out of the balloon and pulled it out and put the valve back together. So far it has worked perfectly and my pool vac has so much more suction power now.

Used this when upgrading the pipes and valves for my pool pump and sand filter. It’s a high-quality, genuine Jandy valve that feels very solid—I expect it to last for decades. Nice bonus that replacement parts will be easy to find in the future if I ever need them.

Only buy Jandy valves. I purchased one like it and leaked at the screws from day one. I did not over tighten, as these don't need to be tightened, just snug. I have purchased 5 Jandy valves for my pool, and haven't had any problem with any of them. Good product, cost is a bit more but not having a problem is worth it. You don't want to remove after re-plumbing your pool.

This gate valve is much better that the cheap pvc twist type ball valves. I hade some pool plumbing redone 2 years ago and at the time the cheap ball valves were used. Two summers was all it took for the sun to make the pvc valves brittle to the point that 2 of the 4 valves broke. One was at the twist handle and one had broken a chip out at the coupler. I chose to replace all the valves with these Jandy gate valves. The operation is much smoother and based on research these seem to be high quality. My experience with them is that they are far superior to the twist style ball valves. They are on their first summer season but are just as easy to open/close as the day they arrived. The install is the same as the pvc ball valves but these are much thicker. Time will tell but I have since installed shading over the exposed plumbing to prevent further sun damage and I believe these are of much higher quality.

I bought a house with a built in pool and spa. The Jandy valves were already installed. While looking for a leak I over tightened one screw on a valve and cracked the plastic housing. As a result when the pump is not running air leaks in to the plumbing and fills the plumbing and pump with air. When that happens the pump is not primed and cannot filter the water. My bad! The valves work fine but are very expensive. It would be nice if they installed sleeves around the screw holes that would help prevent over tightening like I did. General Motors and Ford do that on some of their transmission gaskets and it works great.

Jandy Neverlube is the brand to get. I don’t think there is a better pool valve. These are replacing the insides of Jandy Neverlube valves that were installed over 30 years ago. Looks like the same quality.

Diverse water as expected

Well made and a perfect watertight seal in all positions.

Goof product

Great product!! Well built

picture shows 3-port valve; info is for a 2-port valve; received a 2-port valve; Great Shape Brand New