Enga Hand-held Shower Head Set - Oil Rubbed Bronze Brass Handheld Shower Wand with Wall Mount Adjustable Elbow Holder and 59inch Long Hose - Modern Rectangle Hand Shower High Pressure

Very happy with this product. Looks good, feels heavy, and high quality. The dimensions in the product image are correct: the square body is 30mm side length. That's a diagonal of 42.4mm so a circular hole of diameter 42.4mm is covered by the escutcheon which has a side length of 50mm. A 1-5/8" hole (41.2mm) would be tight to rotate the body into but could be opened very slightly with a dremel (or the drill bit wiggled) if need be. A 1-3/4" hole (44.5mm) would have more room but must be perfectly centered on the drop ear elbow otherwise the escutcheon won't cover the hole on one side. My drop ear elbow was 41mm below the tile surface. Product B0CMXMND8W with total length 2" including threads (1.5" extension), worked out perfectly for me and the body ended up just above the tile surface by 2mm. I contacted the seller, following the description's advice, and they refunded the cost of the adapter. Hope this helps anyone else in the same situation as me. I used Blue Monster PTFE tape, not the included tape, and wound it on tightly in the correct direction (clockwise when looking at the end) so as not to unwind when tightening. I started with both NPT joints just hand tight to make the final "one more rotation?" choice easier. Had I fully tightened the extension to the body first, I might have ended up with the hose outlet pointing upwards. I greased both sides of both hose washers to reduce friction when tightening: Oatey Plumber's Faucet and Valve Grease. Check your drop ear elbow is screwed firmly to blocking to counter the force needed to rotate the NPT threads. Don't forget to slide the escutcheon on before tightening! Oh, and they include gloves!

Muuuy facil de instalar, excelente material, buen diseño y la relación costo beneficio inmejorable… hasta el momento no hay queja gracias!

Nice chrome finish, good weight wand, hose length was perfect for my set up. The only things to consider is the rough-in... as the nipple is attached you can't adjust the length... so your rough has to be perfectly set in place allowing for the near exact thickness of the tile. I roughed in so my elbow was flush to the cement board face but with my 3/8" thick tile + the tile cement it ended up too deep into the wall to be able to get more than 3 turns. Not enough to be sure of a good seal. Ended up having to enlarge my hole to allow the body of the unit to go in further. Luckily the finish plate covered the enlarged hole.

Bonne qualité

Funciona muy bien, cumplio con mis espectativas y mas que a compre por menos de 1000 pesos