Dupli-Color Ebha09107 Arctic Silver Metallic Honda Perfect Match Automotive Paint - 8 Oz. Aerosol

Matched auto well, even after 9 years in the sun. Spray bottle allowed for feathering of scratched area. Used a dent puller and then painted area. Looks great.

Used to fix small peeling spots on a color sanded and buffed clear coat paint job that is 15 yrs old now. Surface prep matters, use multiple light coats. Sand and buff to match. 6 mos in, it looks good and matches better than expected. You can buff off overspray easily.

Was an exact OEM color match for my 1996 ford f150 (obviously it didn't match perfectly, since my truck has sun fading). Was easy to use as any spray paint is.

I’ll just get the negative part of this review over with now. When I received the can I couldn’t help but notice it was about half the size of any other spray paint can. With that said I had more than enough for one guitar. Now with out of the way. It went on effortlessly. Nice smooth, even coats and dried amazingly fast. Didn’t have any fish eye. Slight over spraying with the metal base coat but that was my fault and was easily sanding out. The thing is in order to get it to look good you need to get all the prep work done correctly. If you don’t it’s your fault you did a shitty job. Not the paint. Of course you are going to want to use a primer first. Then they sell something called metal cast 100. Very important. You need to use this stuff if you are spraying anything not metal like wood. if you want your color coat to look like metallic red. It’s the color of metallic silver so when you spray your transparent red over it you get the metallic look. Second anyone who says that the paint or the nozzle doesn’t flow evenly. Here’s a tip that will save you a lot of time and hassle. They have these attachments for $5 a piece that attaches to any spray paint can and turns the uneven spraying into fine and even coats as if you were using a paint gun. If you are trying to paint something with a rattle can and you keep have problems with running paint and/or overspray and you don’t use this simple device I honestly have no sympathy for you. When used with one of those you will have great results. If you don’t then you have no one to blame but yourself. Also to those of you you have said the nozzle stopped working. Odds are the hole that the paint comes out of just has dried paint blocking the paint from coming out or coming out evenly. Simple soap and water should fix that (how did you swap one cap for another with this paint?). For best results remember this anocronym AKCM Always Keep Can Moving Never let your hand stop moving if your finger is in that trigger. Especially with colors like these. Otherwise it will look uneven. Darker in some spots and lighter in others or the dreaded overpainting an area. If you make a mistake you don’t have to start over. Remember just be patient and let it dry and you can then just sand the mistake out.

Do not bother with this paint. Did not come out as a spray. All it did was spit and splatter everywhere. Now I have to wait to see if the vendor will buy me a new bumper and fog lights covers. I bought a new bumper through Amazon and new fog light covers. I don’t know how to takeoff paint off plastic without scratching, scuffing up,and ruining the brand new bumper and fog light covers that I bought through Amazon. If not, then I have to pay a professional to do this. Part two: I received my refund for the 17 dollars and some change. But the Amazon associate that assist me 48 hours ago that supposedly was going to request restitution for my damage of my new bumper and fog lights never did the report. So today which is 48 hours later I'm on the phone with another Amazon associate trying to get this resolution. I have a feeling I'm going to be stuck with a splattered bumper. So Amazon associate came back on the phone stated that I have to wait another 48 hours for the seller to respond since the first associate did not send the photos and the email to the vendor. So now I get to call my mechanic again and push him off because I the customer did not get a resolution to what's going to happen with my bumper and fog lights and I have to wait until I get an answer or if I get a refund or I don't even know what. Do you know how hard it is to get into mechanic in the state of Florida! Just as hard as getting into a doctor's appointment. Latest update. Manager says it was my fault with the paint splattering all over the place. And they said I already got refunded for the $18. But it's my fault that now I have $150 worth of damages on their bumper and fog light covers that I got from them due to their paint that they sold me. They said the paint arrived to me with no damages. How did they know that. I explained to them for years I have bought spray paint for them and I never had issues and I never complain about anything I never sent anything back. But this one can spit everywhere and I'm at fault.So I could either spend money at a mechanics to get this paint off or buy a new set through them. So I canceled everything. I am no longer buying from amazon. When they call the customer the blamer of their default product, there is something wrong with the company. Money grubbing Chinese supporting company. They probably don't even like Americans.

Gather 'round, children, and let me tell you a tale of reasonable car restoration. In 2021 your boy was working two jobs: one a day role managing operations for a marketing agency for 8 hours, and the other as a dishwasher for a restaurant for the next 8 hours. In addition there was a 45 minute drive each way from where I live to the restaurant and back. So we are talking long hours. I slept maybe 4 or 5 hours a night. I had taken the restaurant job in an emergency situation (hey, 30K a year ain't bad when nothing else is coming in) and was sticking with it while I was feeling the agency job out. So I was working 16 hours a day, in the summer heat, 5 or 6 days a week. Friday night, well Saturday morning, really, I got off the restaurant job after many sweaty hours (no cooling in that back of house!). I had parked my 2004 Camry in a hotel gararge a block away and was giving a less fortunate fellow employee a ride home. As we got into the car, which was parked next to a massive rectangular pillar, your boy was blathering away at his aquaintance. My Chatty Cathy mode was in full effect. Putting the car in reverse without paying attention at all, I scraped along the pillar with the passenger side door. I don't drink or do drugs. I'm a good driver and don't have any points on my license. But the fact is that I was basically intoxicated after several months of 16 hour days with physical labor and little sleep night after night. I would never have done this under normal circumstances. I would have carefully looked around and checked before starting to drive, especially in reverse. But now my car was deeply scraped and dented, with orange undercoat glaring along that door. Ick. A few weeks later I quit the restaurant job. Now I was dating and man that bunch of digs and scrapes was embarassing! Calling around to some shops, I found their pricing to fill and repair or replace with a junkyard door was way out of proportion to the value of the vehicle--a quarter of the blue book price. No way! I thought I was stuck with the ugly orange reminder forever. In the spring of 2023 I started looking for options. What can I say, I am both busy and slow. Enter this paint. I bought a can and sprayed it on. I was not professional. I did it outside, in my driveway, in the wind, without any PPE. This was an improvement, but I learned about this can. It * did * clog and sputter. It * was * hard to apply with just my finger. I got a lot of drip down the door and thought it was me. But I've ran a metal fab shop and know how to apply spraypaint, so what gives? Maybe that I could hang or sit the object down for better angles, and I can't do that with the door? So the door was say 20% improved with this first pair of coats. You could still see a small bit of the orange, and somehow some purple, though. I waited a year, then got brave again. How about I learn, and this time get a respirator, a snap on spray handle that you squeeze with your whole hand instead of one finger, and another can of paint and try again? This spring, 2024, I tried again. The sun went in and out of clouds and pissed me off with the constant change of light and heat. The wind kicked up. I had taped the door off this time and still got some on the windows. The surface ended up kind of matte, a bit rough for my taste...but overall the experience was much improved. I got two coats out of this can, then snapped the above photo to send to a friend who has seen the car in person many times over the past several years. "Holy cow!" he said. "That is so much better!" He reminded me the purpose of this kind of work is to make your car or whatever look 8% better. It doesn't need to be a masterpiece. He has been holding off improving his own car because of expecting and knowing he'll be disappointed by wanting a 50% improvement. Look--this is say 3 or 4 coats total. I haven't put clearcoat on it. Since May 2024 it has stood up to spring storms, heavy rain, hail, long trips back and forth from North Carolina to Virginia. We'll see in a year or so if it needs further coats or what (remember, I am busy and slow). If you're waiting on making an improvement to your car, and the listing says the color will match, it will well enough. Don't expect perfection but do expect visible improvement. Invest in $30-50 of other supplies like the respirator (mine was $17) and the clip on handle (around $8) and you'll get good results. For what I invested I feel this is a valuable and worthwhile improvement. I hope this was entertaining and informative for you.

Perfect match to my Dodge ram truck

These two cans are labeled as the same color but they have 2 different cap colors and they definitely spray different colors, as shown in the photos. The lighter Honda "Heather Mist" is correct and applies well. But the darker 2nd can is worthless to me, which leaves my time sensitive project in limbo. Disappointed in the quality control of these cans! Double check your color before applying. The correct Heather Mist applied well on primer, and is a pretty close color match, but not "Perfect" by any means. Some further panel blending needed.