SuperFast 3D Printer Resin Water Washable, 0.6 sec 50um Printing, Made in Korea by 3DMaterials (1000g, Dark Grey)

So far so good. Zero issues printing on my Phrozen Transform RGB LCD. My print times have been reduce roughly 20% due to the fast curing time of 4 seconds, that's right 4 seconds on a RGB LCD. I used the same settings as recommended by another reviewer and it works like a charm. The calibration print in the photo was at 4 seconds. I did 1 at 3 seconds and 1 at 3.5 seconds as well and I could probably get away with 3.5 seconds but decide to go with 4 seconds. The prints in the photos have obviously been post processed and have had primer and/or paint applied. Prints still require the normal little bit of sanding and primer. It washes extremely easily with warm soapy water and cures perfectly in my curing cabinet. I have not had any bad results as mentioned by other reviewers. Every printer and environment are different. My printer is in may insulated garage and if it drops below 70° I'll turn on a few space heaters to warm the printer and resin. The only time I've had failures is if it's to cold, that's with any resin I've used. I figured for less than $30/kg for a water washable resin it was worth a try and I'm glad I did. My specs below; Printer: Phrozen Transfrom RGB LCD Layer Height: .05mm Bottom Exposure: 50 seconds 10 layers high Normal Layer Exposure: 4 seconds Washing: Warm water with a bit of dish washing soap and a tooth brush Curing: 20 minutes each side in my home made curing cabinet

I was curious when I saw 1 second cure time, especially for a water-washable resin. I did a test with a calibration print set to 4 seconds to start, and was amazed to see it had actually over cured! I’ve now printed a large object in record time, cure=3 seconds. It feels soapy but solid right off the plate, but final wash and curing will fix that up. I do see some layer lines, and I’m inclined to believe it’s due to it still being over cured! I may need to go down to 2 seconds, or maybe even the advertised 1 second! Incredible. I’m used to 10 seconds with Elegoo, so this is shaving hours off my printing. If I find a flaw after the prints settle for days/weeks, I’ll update.

Absolute garbage. I've attempted to print with this resin across 3 different printers, 4k, mono, RGB, every power setting from minimum to maximum, and every setting from long to short duration of exposure, lifting speeds, etc. trying to find a happy medium where this resin likes to work. I've even attempted heating the resin to optimal temperature, the printer interior to optimal temperatures, and even blending it with a known and flawless resin to give it some sort of chance. 40 failed prints. 2 liters of resin. It either over-cures, leaving semi-hard sheets damaging the FEP and nFEP films and ruining the resolution of the print, or under-cures, leading to peeling layers, fail-to-prints, slumped prints, etc. Avoid at all costs.

Works as advertised, I was astounded when their .8 second cure time turned out to be accurate. I would use this a lot more often if the colors were more attractive. The ‘grey’ can more accurately be described as black, which is fine if you want black resin. Unfortunately I need grey resin and this is way too dark for my purposes. Again it works great, but the ‘grey’ is so dark that it is literally a smokey black color.

I love this stuff. Fast cure times, with great results. Just ordered 2 more bottles. The resin is thick and really dark gray, basically black. The only thing is, is that it is harder to see the details on the finished model verses a gray resin. But the details are there! It is mostly water washable, I just squirt it with some IPA after the initial wash, just like I do with other water washable resin.

Tried this one as well as a white washable resin from another brand. The white one performed awesome. Cured like ceramic almost. This stuff was a headache to use. I thought my printer was messes up. It almost seemed like this resin mix would seperate causing it to cure incorrectly. Results were warped n soft. Not sure but seems cheap.

After several prints, adjusting burn times and layer thickness.. I can't make a decent print with this stuff. And it really isn't water washable. I dont' have a IPA bath at all to test, but even with hot water and can't get it clean. Elegoo cleans wells with an "under the tap" rinse of hot water. The crap never cleans up. **Update** I adjusted my score to show improvement. I finally got some decent printer. But this stuff isn't fast curing in my Photon Mono. I had to go with a .04mm layer and a 2.2 Sec cure time. Twice as long as the MFG recommends. Also I had to slow the lift rate significantly to cut the z-lining. But I'm finally getting usable prints. But I figure I'm going 30-40% longer to get the quality I was getting form Elegoo Water Wash.

I am a novice hobby printer using a Creality LD002R. I’ve attached a couple of comparison shots of this resin (dark gray) vs Elegoo (light gray) water washable. There is a noticeable drop in detail quality which is offset by the decrease in price and printing time. The Elegoo used 15 second layers and the 3D materials used the advertised 4 seconds. Both had 45 second base layers. I received more consistent quality results from the Elegoo resin but I think with some adjustments to exposure time the 3D materials may be able to match it. My only issue is that the documentation for this resin is limited to this amazon listing and the posts of other reviewers. There was no information on/in the box. Excellent product for my purposes. 100% my new main but will probably keep a bottle of Elegoo on the side until I figure this out.

Creo tien los valores de ti mpo mal especificados, imprimí con los valores estándares y quedaba muy duro, las puse como decía en la información del empaque y fue un desastre

最初は怪しいなぁと思いながらも購入。 しかし！ 表記通りの効果時間でした。 最近購入したELEGOO MARSで純正のレジンを使用してましたが レジンが無くなりそうだったので実験的に購入した結果 大正解だったと思います。 good 〇 効果時間が半分 〇 匂いが少ない 〇 安い △ 純正レジンより反りが少ない？ （まだ回数が少ないため 同じかも知れません） △ 思ったより黒かった※写真の色の通り （グレーとの表記ですが写真は黒っぽいしと思ってましたが、写真通りの色 個人的な感覚だと黒として扱う感じ） bad （elegoo純正レジン比較として） × 水洗いの時 粘っこい。 （純正レジンはシチューの様な粘度 これは暖かいハチミツの様な粘度） 参考にしてください。 普通に洗えるので何も変わらないですが一応書いておきます。 とにかく早く作れるので上位機種を購入したような気分になれました。