Bbox Single 10 Inch Subwoofer Sealed Enclosure - Fits 2002-2018 Dodge Ram Quad Cab - Carpeted Car Subwoofer Boxes & Enclosures - Subwoofer Box Improves Audio Quality, Sound and Bass - Charcoal

This is an excellent box for a Kicker CompR CWR104 (43CWR104) in a 2013 RAM 1500 Crew Cab. I have the full-bench seat and do not have the fold-out flat floor, so I will be basing my review off of this setup.I'm powering the sub with a Kicker CXA300.1 (43CXA3001) amp that I mounted to the passenger side back wall of the cab and it sounds fantastic. The sub calls for a minimum sealed enclosure size of .8 cu. ft. and this box provides .85 cu. ft., so it is just barely enough but it comes with poly-fil already stapled in to make the sub think it's in a larger box. I chose this passenger-side-only box because I actually use the drivers side compartment pretty frequently, so this box gives me the best of both worlds. It also leaves plenty of room to still use the rear cup holders, which is what I was looking for.I'm very impressed with the quality of the box for the price and have not noticed any air leaks due to a bad seal. The carpet is nicely installed and looks very professional. I had already done the rear-seat-fold-down mod by using spacers to lift the bench seat roughly an inch, but the carpet on the bottom of the seat still rests on the outer ring of the sub (notice in my pictures the outline of the sub in the carpet of the bottom of the seat). The box does come with two carpeted spacers to install on either side of the sub for this reason, but I have ordered a GS Power 10" Bar Grill (also from Amazon) instead because it will provide much more protection than the included spacers. The terminal cup is kind of located in a bad spot though, because there is not much space behind it once it is screwed in. The product description says it is best to solder the speaker wire to the inside of the terminal tabs, and I would definitely agree with that. I tried using quick disconnects, but they pulled out fairly easily because of the angle I had to bend the tabs for everything to fit once screwed in. I soldered the wires to the tabs instead for a much more reliable connection.Overall, I am highly satisfied with this box, especially for the affordable price versus other pre-made boxes or building a DIY fiberglass enclosure. I highly recommend it for 4th Gen (2009-2017) RAM Crew Cab and Quad Cab pickups.Bonus: Using Amazon Prime's free 2 day shipping method, the box was delivered in only 23 hours after being shipped. An incredible shipping speed rate for a product of this size and weight!

Looks nice, but not sealed. Slightly pushing the sub gives you lots of audible leaks on the far side of the box. Due to the only 1" or so clearance there you can't even seal them yourself. Well maybe if I strip off the carpet and take the box apart. But why not just make your own at that point.It was dirt cheap, but the old saying if something seems to good to be true it probably is comes into play here. Disappointed.EDIT: I've been using this for 10 months or so now and it is fantastic. True it's not sealed as well as it should be, but it's not having much effect on the bass. It's minor and as I've heard before the 'flawless' seal isn't that big of a deal (not like it has holes in it or anything). My old school NIB Polk DB10 (the 90's USA made stuff) fit perfectly and absolutely pounds in the 40-60hz range that I use it in (CDT Audio 6x9 CF "Subs" in doors pick up the 60-110 range). I'm sending 300w at 4ohms to the sub. Really great, tight bass. It also looks great. What did I learn? Before bitching about something I should try it and see how well it works, and this works great. For those having issues I recommend tuning a bit or making sure the amp/sub etc is all correctly set. This is an impressive dirt cheap box. Also, Amazon says it won't fit my 2014 Ram. It fits perfectly! For those with newer body style Rams don't be afraid to buy.

Enclosure fairly well built could of used some sealant on the corners of the interior of the box but I understand with the box dimensions that would of been a very difficult task. It's a great fit I had to shave a little off the edge to fit the sub in but no issue. Been using this box for the past 2-3 weeks it's doing its job and fit nicely I wish the BBOX logo was facing a different direction. But thats nit picking otherwise I'm happy with this box and plan on continuing further use with bbox

Package arrived beat up, upon unboxing I found that it was in tact. FOR THOSE CONCERNED...I punched all the buttons to order a dual 10" sealed box. The title said 12" after clicking all the right buttons, I went with it, and at dual 10" sealed box arrived. It is NOT pre wired inside. I will have to unscrew the terminals to add speaker wire for inside the box because it is way too tight to get your hand in there to feed the wire to the terminal. Maybe a 9 month old could get their hand there?? Also the box is not separated, there is NO partition. My subs will share air space via a very small passage. I pushed a tape measure all the way through to see and sure enough it came out the other speaker cutout unimpeded. I will update this once it is working and under power. It will house 2 JL Audio 10" subs. But the box is in tact and does not appear as though it will fall apart. I have the very same brand single 12" sealed box already for several years, it has not fallen apart. Again, I will update with more observations at a later date. 2nd Update: Installed in truck, fit perfectly. No need to alter or remove carpet, I can slide my hand between the speak and the bottom of the seat. The subwoofers sound amazing. 2 JL Audio 10's powered by Kicker 800.1. Working out very well. I am happy.