DipYourCarcom Plasti Dip Dissolver - Finish Remover, Striper, and Cleaner for Plastic Dip Painted Cars - Liquifies and Removes Dip to Thin to Peel (32 oz Spray Bottle)

Genuinely works phenomenal. Had some dip ~6 years old and pretty thin + burned from UV. 2-4 sprays as suggested + plastic brush chucked in a drill took all the old dip off. Much better than rubbing it all off by hand

It does work, my bumpers were black plasti dip, it started getting nicks and peeling off in places so it was time to remove it. It takes about 3 to 4 applications. I used a 3m green scrub pad, a scrub brush, a screw on pressure nose, and for the stubborn spots a plastic puddy knife. It took about 45 min to do both bumpers. Plasti dip definitely does not peel off like the brand sas Spary it once, let it sit for about 5 min, hit it with the scrub brush. Spay again and use the scru brush again. It should be mostly liquid. Spray it down with the hose. Respray the remaining areas with the solvent. Let it sit for a couple min. Scrub with the 3m pad. Rinse with water. Whatever remain spray agsin with the solvent, let sit, use whichever tool u need to to remove the last bit. Rinse. Done. It wasnt too time consuming or difficult. I posted a pic of the remover bottle and how much I had left after 2 bumpers. Worth the $$

This thing works like a charm I used on my 350z with a terrible wrap to remove it it made removing it a easy task it takes some time but it’s way less effort then picking at a wrap piece by piece it’s well worth it will need at least 2 bottles to finish a small car

This.Is the waste of money?This product did not remove any of anything. I was only able to remove the plasti dip using my oven cleaner.

Pricey but works well. Wasn't fully perfect. It removed a bunch of the old plastidip but there were definitely some little parts that wouldn't be removed at all, even with a second and third attempt with the spray directions. But luckily those spots were weak enough to be removed with some goo gone

Product works very well. Soaked my rims and was able to pressure wash the dip right off. For the tough spots I did have to soak a second time. But was able to take off the dip easily.

I was skeptical before I used this product. I got tired of my plastidip rims and decided to pull the trigger on this. I sprayed it before going to a self-wash. When I hit it with a pressure washer, the plastidip peeled right off. I had to spray it a few times to get the most of it and I would say this saved me so much time.

The media could not be loaded. I sprayed all the chrome and rims on my car with Plasti Dip 4 years ago, but now that I’m selling the car, I needed to remove all of it to revert the vehicle back to it’s stock exterior.At first, I was going to try to remove all of the Plasti Dip by hand, but I quickly learned that that was going to be extremely taxing and time consuming. I originally put 5 coats of Plasti Dip on each part of the vehicle that I sprayed, so I needed a product that was going to make removing the dip quick and easy.It took me several hours to finish, but that’s because I had 5 layers to remove and I was taking my time. I wanted to remove all of the Pasti Dip in 1 setting since I planned to sell the vehicle soon and didn’t wait to get drenched by the back-spray from the pressure washer more than once. Since time was of the essence, I decided to purchase some Dip Dissolver to make this project go as smooth as possible.Removing Plasti Dip is as simple as it sounds… Just spray and wait 2 to 3 minutes, then spray again and wait another 2 to 3 minutes. After that, you can pressure wash the area and it comes right off.I read online about a few other ways to remove Plasti Dip, but I was skeptical of those methods. I know Dip Dissolver works and I would highly recommend going this route and using this product if you need to remove Plasti Dip from your car because it the easiest, safest, and most efficient method.