3/16 Inch M4 Wire Rope Cable Clip Clamp, 304 Stainless Steel, U Bolt Saddle Fastener, 25 Packs

Very nice product and work well to my application

Apply to the right size cable tighten and they will hold simple as that.Bottomline is they simply work,plus the price is cheap for what you get.

Though they are tiny and don’t drop a nut one needs a socket to tighten not muck space between nuts They clamp down on the cable perfectlyWill buy them again

They dont seem real sturdy looking, very small and wimpy looking next to other brand clamps of same size but so far so good working as they should and a great price for how many you get.

perfect thanks

I built a shade structure in my yard, and these allowed me to make adjustable loops at the ends of my cables. I used two per loop, giving me some redundancy for safety. They are beautifully made, and they go together easily. I used a nut-driver to tighten the nuts, and that worked very well.

Works o.k., but avoid >5 ft-lbs torque. If you try to put 7.5 ft-lbs torque on these, as wire vendors recommend for 3/16 inch cable, you'll cross-thread them. Make sure you're using 7 mm hex socket with 3/8 inch drive. Remember to tighten the nuts on the live end side.

These seem well made and work as they should. Use two for each cable loop and you'll never have slippage. I am using these along with 3/16 in. cable to support long stretches of lights for my Daughter's wedding in and about our barn. when all is said and done these cable clamps will support about 750 ft. of lights. I also heartily recommend using a mini socket wrench to tighten the nuts. It makes the job much easier.