Antec Dark League DF600 Flux, Mid-Tower ATX Gaming Case, Flux Platform, 5 x 120mm Fans Included, ARGB & PWM Fan Controller, Tempered Glass Side Panel, 2 x USB3.0, High-End GPU Support

I absolutely love the case. There are a couple things that can be improved - Such as 1/2" or so more room in the other side panel area (where you would hide wiring etc..) would be ideal as it can be pretty tight trying to pack everything in there no matter how neat a job you do, getting the side panel back on can be a little more difficult than it could be due this to reason. (not a huge issue, just pointing out more room would be great, specially nowadays with controllers, RGB etc.. which adds a lot more wiring). Though, maybe this has been resolved on newer cases ? not sure myself as I have not checked out the new versions. Currently pictured is the Corsair iCUE H100i RGB ELITE CAPELLIX though I have the Corsair iCUE H150i RGB ELITE CAPELLIX to replace it with (it was a temporary addition as at the time of order I could not find the 150 in stock, so I have my i9-12900k underclocked atm.Aesthetics on this case are just beautiful in my eyes at least, I love the front design with the wavy look and really appeals to me as it adds character to the overall look and the side glass panel is always a plus. There is plenty of room to customize your look and get it setup how you want. I coupled my setup with an old Hyper-X DDR Cooler (just because it looks cool, no pun intended) and routed my AIO cooler lines under it after ensuring any possible air is already upstream. Also, added the Heatsink to my backplate as the temps were sitting at 85-87C on one of the Zotac Sensors prior in which now (without the small fan) are is sitting at 52C - Fan made no difference and will be removed, it was a test I added in a few hours ago.My only other wish is that the front panel itself had a removable filter to filter dust. The mesh is great as it will catch anything large (such as cat hair) and allows for great airflow but for dust particles it will not do anything for. This is an easy fix as I took dryer sheets and overlapped them going down to cover the area. This being the main intake for airflow, it is important to prevent anything that could build up in the case from preventing proper cooling or reducing lifetime of fans (dust). It my photo, the 2 bars going across are not part of the product, they are self made rigid items to prevent the dryer sheets from being sucked into the fans. Just pointing that out in-case anyone gets confused why theirs does not have it ..I highly recommend this case, for the size (compared to a full tower like my old case) it has a ton of room and is in my opinion, one of the better looking cases around as far as clean looks while providing the important things such as the airflow overall.

Case quality is awesome it was easy to assemble, functions great, and rgb fan looks awesome when lit up to desire color I like. Fan capacity and dust filter are great so far. Would highly recommend.

I bought this to build my new gaming PC in. My first impression was straight quality. It is heavy, sturdy, and well built. There are 5 included fans, 3 of which utilize ARGB. There is also an included fan/rgb hun. The entire front is mesh and allows superb airflow. The top is also mesh, and has a magnetic dust filter. The left side is smoked, tempered glass, while the right has basement perforations and a magnetic dust filter. There are lots of tie down locations, as well as zip ties and velcro straps included for cable management.I install an ATX Z570 board with Ryzen 7 5800X cooled by an ID Cooling tower cooler. It fits comfortably into the case without coming near the left side glass. My 3060ti also easily fits lengthwise. This case could handle a MUCH longer card that my two fan unit.This case was a pleasure to build in. Tons of room inside. I had no issues getting access to anything. This is a fantastic case!

Really good case for its pricing. It has 3 argb fans and two non adding up to 5 pre-installed fans. One problem I had personally was not having much room for my PSU.Other than that it’s really good and easy to install. Has really great cable management. Although I wish there was more room at the bottom because depending on where the usb 3 header is the cable might be a little strained due to their not being much runThis case has the added benefit of having a fan hub already installed into the case. Meaning on top of having pretty good airflow with the 5 included fans if you get your own you won’t need to worry about where to connect them

Amazing case! Looks great, tons of room. It is a very tall case, wasn’t expecting that but no fault of the product. I should have looked at the dimensions. Cable management is great, low noise, easy to remove and install parts. The fans look cool and produce great airflow. The power supply was installed on the bottom and it has lots of ventilation. I am happy with this product.

It's a great case! I don't care about the RGB stuff as my rig is more for function, not form. But, when you're trying to find a case that lets you use your motherboard and m.2 drives, while also allowing you to keep your old SATA drives, and has room for that huge video card .... this case does that.The clear window on the side lets you see all your RGB if you're into that, and it definitely makes you keep your cabling neat and tidy. Plenty of fans, with room for more.The only thing I wish it had was a support stand for the video card. Buy or 3D print your own support stand and this case is perfect.

This case suited my needs. I wanted an ATX case that wasn't overboard or expensive for a water cooling. I was able to fit in a 360mm rad up top and a 480mm rad on the front with a 120mm fan above. If I chose to go 2x 360 rad's I would have had problems as fittings would have come extremely close to the top pushing fans -- just something to note. Overall the size is perfect, the airflow is awesome, and I am happy I can control the RBG settings on my parts by cycling through the LED options next to the power button. If you want more RGB features you can DL your mobo specific software.While gaming my RAM and M.2 temps never topped 40c. With my last case (Phantek Enthoo Pro) temps were at least 10c higher for the two previously mentioned parts. The same goes for all of my temperature sensed chips across my mobo. Ignore the one spike for TMPIN6. That occurred when I first loaded up HWMonitor. CPU and GPU aren't worth mentioning since the are in a water cooled loop therefore those temps are already low.TLDR: Great case. Good air flow. Supplied fans are very quiet. I recommend this case.