Dorman 2330836 Multifunction Switch Assembly Compatible with Select Jeep Models

My previous one on my 2000 TJ was intermittent on left turns. This fit perfectly and works great. Pretty easy to install. Hardest part was getting the cover back on. Videos on YT show detailed procedure. Would recommend.

I bought 2 of these a little over a month ago, as I wanted to use them for a while before writing a review. I have 2 Jeep TJ's, a 1998 and a 2000. Both were having issues with the signals not fully canceling, and causing one of the dash indicators to light up when I'd use the brakes. Decided to do the Dorman, rather than the cheaper full-on Chinese version. Probably the exact same, but made me feel better.Installed each with no issues. It was harder getting the clamshell off/on than to install the switch. The Dorman was very similar in construction/appearance to the original Mopar. A small screwdriver is handy for releasing the electrical connector catch.They have both worked similarly and well. The biggest difference that I can discern between the OEM and Dorman is the "feel" of the switch. The Dorman is not as crisp feeling, but functions perfectly, both signal-wise and for headlight highbeams. Turn signal canceling works as designed also (which is another problem I had with my aging switches).I gave 5 stars, as they have both performed perfectly thus far.

Worked great ... No issues

Good quality

I was having an issue in my 98 XJ where when I engage my left turn signal, it blinks both rear turn signals. I decided to fire the parts cannon assuming that it was the switch since it didn’t do it if I didn’t lock the left signal in place. The MFS fixed it and hopefully there’s not any wiring issues that will eventually harm the new one.I do agree with the people who say it doesn’t feel as good as the OEM and that you may have to put in a bit of extra effort to get it to engage but that’s worth the huge price difference. I didn’t wanna get one at the junkyard because the Dorman has a lifetime warranty according to the new AI search feature, if it has a qualifying failure I will be able to get another one for free.

The only complaints I have about this turn signal switch are:1. The switches are really stiff when you first install it2. The lever that activates the switches feels flimsy3. MOST IMPORTANTLY, the left turn switch doesn't fully deactivate (at least on the unit I received) and requires you to press dow slightly on it unless you want to hear infernal clicking.Give it a 1/5 overall for the time being.

I had no rear tail lights and no rear turn signals. Noticed that my hazards only worked when I finangled around with the multi switch. Did some research and found that this switch could be the cause of the problem if it goes bad.Got the switch ordered and delivered quickly. Pretty easy to install. Now all lights are working fine on my 1998 Jeep again.Hope this helps someone having the same light issues.

Seems almost perfect. Nothing quite feels like the factory items....this is pretty close. Worked as you would expect and looks like OEM. Easy installation too, only a few screws and plug in the harness.