Merten & Storck Pre-Seasoned Carbon Steel 10” Frying Pan Skillet, Use on Induction, Stove and Grill, Durable, Even-Heating, for Searing, Grilling, Oven Use, and Campfire, Indoor/Outdoor

1 year update: I happen to stumble across this listing again and it seems like the reviews are very polarized so I want to do an update and share a tip for people having sticking issues. Firstly, this is still my daily driver in the kitchen. In regards to this pan specifically, I think it's a perfectly good carbon steel and reasonably priced. That said, I have struggled with the non-stick performance and was nearly ready to give up on it before stumbling upon a "hack". So like I said originally the factory seasoning works quite well. However, that started to fade after a few weeks or so. After awhile I got annoyed and tried to apply new layers of seasoning. This is my first carbon anything pan so these attempts had varying success (seems like the best was leaving it in the oven for a good 20-30 mins and leaving it in there to slowly cool). Regardless, even if it worked great for a few days or couple weeks, it always faded again. Seemed like the "gets better with time" didn't apply to carbon steel or I was doing something wrong. I started calling it the "all stick pan" and at one point was trying to apply a seasoning layer every week or two. I bought a flexible metal spatula and this was a big upgrade. Much more effective at releasing stuck on food. Annoying that it's necessary but hey it works right? However, I noticed that simply running that spatula over the pan to remove food bits made the pan more non-stick the next time I used it. This was my first clue that I wasn't cleaning aggressively enough. Now I have a friend who loves his cast iron and he's anti-soap. He does what I'm now calling a "hot water deglaze". As soon as you're done cooking and the pan is still piping hot, throw a splash of hot water in so that it boils very vigorously. I'd only very seldom done this bc the instructions say let it cool slowly (presumably to prevent warping). However, one night I deglazed while making a pan sauce. I'd made the "mistake" of not using my stainless for that. The pan was being pretty sticky at that point. But the next morning I made eggs and boom! Super non-stick as if I'd just seasoned it. So it seems like the issue is thin layers of baked on food residue that don't come off with normal scrubbing. I've noticed some foods are more problematic than others (eg meats, and I think mushrooms). The hot water deglaze removes the remaining grime layer. Now whenever the pan starts getting a little sticky I just do a hot water deglaze after cooking and it's been great. Some of my excess seasoning layers have flaked off and it's forming a nice patina (black area) underneath. Hopefully this tip helps for some of the people struggling with sticking issues. To address warping: I did have an issue with that and I ended up pounding it out with a rubber mallet (while hot). It sits flat and stable now but does have a high spot in the middle and the oil pools around the edges as others have shown. Don't really want to pound it the other way so idk what to do about that. I just try to tilt the pan a bit to spread the oils before tossing food in. Doing the hot water deglaze hasn't caused any warping. Since I pounded it out it's been stable. Original review: Was shopping around for a cast iron and discovered carbon steel. Never heard of of it before, nor owned a cast iron, but I like the idea of it being lighter weight and heating up faster for daily use. I like the idea of a smooth surface too. Note that probably a lot of my comments pertain more to carbon steel in general than this specific pan. Pros: pre-seasoning is great. The pan is very nonstick right out of the box, on par with typical nonstick pans. It's very light and responds quickly to changes in heat. The instructions say you don't need to oil it regularly but I'm doing it anyway. But I like knowing that if that step gets skipped on occasion it's no big deal. It has a smoother surface and requires less oil than cast iron. Also, the handle doesn't get hot under normal usage which is nice. Cons: I think the biggest con here is that the pan is actually too thin. Great for lightness and responding to heat, but it warps very easy. Won't matter much on a gas stove but I have a glass top and that means poor contact, hot spots, and being annoyingly unstable (always wants to spin). You have to try to heat the pan slowly to avoid warping. And of course lack of thermal mass isn't as good for searing meat (cast iron is better for that). It's actually thinner and lighter than my stainless pan (has layers of copper and such). Also, the first time I used it I was using metal tongs and I ended up getting a nick in the bottom of the pan. Hasn't adversely affected anything but it seems like I'll have to stick to silicone cookware or flexible metal. Overall great pan and is now my go to.

I have been a user of cast iron pans for over 15 years. Many of the cast iron pans I have are very old, and were crusted pans that I had to strip the crud off them and season them before they could be used. Some are newer preseasoned pans that I often stripped the seasoning from them to season them again. When I discovered the carbon steel pans, I was intrigued as these pans are much lighter than cast iron. As a point of reference, I also have a number of Le Creuset and Staub pans and Dutch ovens that I love, but are also very heavy and relatively expensive. Before buying, I usually do research to find out about products I am not familiar with. In my research, I found out that materials used in carbon steel and cast iron pans are basically the same except that carbon steel contains 99% iron and 1% carbon vs. cast iron that contains 2%-3.5% carbon and less iron. The additional carbon causes cast iron to be more brittle, so pans are made thicker to help prevent breakage which also makes them much heavier. Since both have a high iron content, they must be oiled to prevent oxidation and rust. Both have pores that absorb oil when heated, hence the creation of the non-stick properties through "seasoning", but the pores in carbon steel are microscopic and much smaller than the pores in cast iron. Because of this, much less oil should be used to season carbon steel than cast iron. If you use too much oil, or do not remove the excess oil as the pans cool, you will end up with a sticky residue on the pan. This is true for both carbon steel and cast iron, and both require some simple maintenance by heating them and coating them with oil after each use. I, personally, use Crisco All Vegetable shortening. A couple reviews mentioned flaking of the surface after use. These pans come preseasoned and coated with a layer of wax to prevent oxidation (rust). The layer of wax must be cleaned off per the instructions before the first use. This is done by washing them in warm soapy water and wiping them with a scrubby sponge to get all the wax off. If this isn't done, the wax will flake off when used the first time. At this point, I truly love these pans and will likely sell some of my treasured cast iron. So, what do I love about these pans. 1 - They are so much lighter in weight than cast iron. 2 - These pans are nonstick with the seasoning already on the pans and only gets better with time and proper seasoning after each use. 3 - Carbon steel, as well as cast iron, will continue to look like new if cleaned and seasoned after each use. 4 - Heats and cools much faster than cast iron. For both, medium to medium high heat is all that is needed. 5 - Can be used on the stove and in the oven as well as an induction cook top. 6 - Since carbon steel cools faster than cast iron, it is less likely to burn foods that are not immediately removed. 7 - Nest together well and take less storage space than most other pan. 8 - Can stack together and use metal utensils without the fear of scratching them. In conclusion, I would definitely recommend these pans if you are willing to take the time to maintain them. If you can do this, they will last for years to come. UPDATE 03/31/22: I have 3 of these pans in 8", 10", and 12" sizes, and the two pictured are the ones I have used the most. In the last 4 weeks, I have used these pans quite often, and so far, they are totally non-stick and have not changed in color as I expected them to. Maybe it is something in the way I take care of them. After using them, they are washed with soap and water without any scrubbing. I totally dry them by heating them on the stove to open the pores of the pan, and then add a very small amount of Crisco oil on a paper towel to coat them with oil. After a couple more minutes of heating, I use a paper towel to remove any excess oil. As they cool, more oils beads on the surface of the pan, and this is again wiped off. Before I store them, I wipe them again with a kitchen towel. Although I fully expect these pans to change color over time, it's possible they stay looking nice by not letting excess oils stay on them. I do know that leaving excess oil on these pans or on cast iron pans will cause a sticky residue to develop. Built up oils on these pans or cast iron will cause them to look really cruddy and will reduce the nonstick capabilities of both. UPDATE 4/07/22: Today, I found out something about carbon steel pans the hard way. Cooking acidic foods in a carbon steel pan removes the seasoning. I made brats with sauerkraut in one of my carbon steel pans. I browned the brats, and then added the sauerkraut to the pan to heat it with the brats. The pan was fine until I cleaned it and found that part of the seasoning was gone. The pan was down to the bare grey metal in spots. Although this doesn't damage the pan, it has to be heated, oiled, and cooled a couple of times to season it again and regain the nonstick qualities of the pan. I also want to mention that when searing meat, you need to get a good sear on the meat before turning it. If you don't, the meat will stick. UPDATE 5/13/22: I have added pictures of my 8" and 10" pans that have been used quite a lot since I got them a couple of months ago. I am extremely happy with the nonstick quality of these pans and that they are so very much lighter than my cast iron pans. After every use, I season them as described previously, and so far they haven't changed in color. Personally, I believe this is because I don't let the oil burn on the pan when I season it as I have also found this to be true with my cast iron pans. All of my cast iron is an even dark black color and also nonstick. In the past, I have had a couple of cast iron pans change color when oil had been left on it for too long and burned. Although the color of the pans will get darker with use and seasoning, I don't think they have to become ugly if the patina is developed evenly. I hope this review was helpful for you. I will update the review if my opinion changes.

La poêle est solide, semble très bien faite. Cuire des tomates l'a décoloré, c'est normal car elles sont acides. Avec une petite touche d'huile rien ne colle. A voir avec le temps, mais je suis très contente avec les premiers essais. La seule chose qui me derange est leur contract légal, il y a trop des provisions bizarres qui me font penser qu'ils vendent un truc dangereux, qu'ils savent que c'est dangereux et qu'ils se lavent les mains en disant que si ça tombe mal, ils n'y sont pour rien même s'ils le sont... Bizarre, comme j'ai dit. C'est une poêle, pas un paquet des cigarettes.

Matériau excellente qualité. Facile à nettoyer et surtout pas trop lourde

This pan is very good to use. And it’s light but non-stick after used properly. We enjoy this pan a lot

I seasoned my pan before use the first time and had no issues. However after cooking 4 pieces of salmon it has left stains even after washing it immediately with hot soapy water, salt and a sponge. I never had this issue with my cast iron from Lodge so it's weird how this seemly now has a permanent stain! And no I feeling NOTHING when touching the surface, so it's clean to the touch.

Una sartén excelente. Las de acero al carbono como esta son las que hay que utilizar para una alimentación sana. Muy recomendable. Solo necesita un curado inicial, y sartén para toda la vida.