Neatfi XL 2,200 Lumens LED Desk Lamp with Clamp, 24W Bright, 50CM Wide LED Lamps, 4 Level Brightness, Dimmable, Eye-Caring, Desk Light for Bedroom & Office (Non-CCT with Clamp, Gold)

I paid £87.96 for this on 20/12/22 during a sale. It felt expensive even on discount, but when it arrived and I had set it up I felt a lot better about the price, because it's a really decent light. It feels very well made. The fitting used to attach it to a desk works great, and it fits easily onto the corner of my desk. The arm for moving the light around has the perfect balance of stiffness to keep it exactly where you move it, while also being easy to move it - you change the high and and position by dragging it around, and the angle of the light on the arm is changed by loosening/tightening an adjusting wheel. The light itself is very wide - I measured it to be about 50cm. The diffused light it emits makes it perfect for illuminating whatever is beneath it from all angles, so it's great for activities like painting models where shadows can be a pain. It's also super bright, so much so that I always put it on the lowest setting while using it (there are 4 brightness levels). I don't know this is definitely the case, but the tone of the light feels like sunlight - when I have it on during the night I feel like it keeps me awake/alert. Overall, I highly recommend it! I think it's a fantastic product, and would certainly buy it again.

This is a review for Neatfi XL 2,200 Lumens 24W Super Bright Desk Lamp LED Task Lamp WITH BASE, Black. The lamp has been well reviewed here as a task lamp with clamp, so I will restrict my review to it's uses as a tabletop lamp. The only choice with base when I purchased my lamp around 10 weeks ago was black (though it now appears to be available in white) but I don't regret that at all. I did wonder if it would be very utilitarian in appearance and not very elegant for a living room, but that was an unnecessary concern. It looks very modernist and quite elegant, and the wide, narrow profile of the light and it's shade looks entirely appropriate. All the light is cast downwards over a broad band, and illuminates the reading working area superbly without disturbing other people in the room. I have it on a low chairside table, at a level below the arm of the chair, and the long very manoeuvrable arm allows it to sit comfortably well above my head. It does not give off any heat at all. I invariably have it on the lowest of it's four levels for reading, though it might need to be up a little for embroidery or craftwork. The problems I had with eyestrain, reading or working in artificial light, have disappeared completely, possibly due to the white daylight effect. The base is very heavy (see the specs above) and there is no danger of it tipping over when the lampstand is slotted into place, though it does need a sturdy foursquare little table, not an unstable pedestal side table which might tip over. The base is cushioned with a thin layer of dense soft foam. It comes very well packed and is easily assembled. I had a few questions regarding the lead length and had a more or less instantaneous email interchange with a charming young man from the company. The lead is a bare 1.8 metres and I did need an extension so it would stretch easily behind my chair from the wall, so I went for a little black and yellow Parth Cube extension here on Amazon which is also of excellent quality and looks very stylish with the lamp. I can recommend this unreservedly as an excellent reading and work side table lamp, and though not cheap is comparatively priced with other quality reading lamps. Thank you to Neatfi.

I bought this lamp in order to help me paint miniature figures for wargaming. I had read several reviews for several different lamps, but the reviews for this one were quite good, and it was not too pricey. Yes it is close to one hundred pounds, but if the lamp lasts as long as it should, it represents excellent value for money. I am slightly older now than when I last did painting, and I wanted to get into it to such an extent that I could start submitting projects for competitions. I have used it in the last fortnight and have not been disappointed. It gives excellent coverage of the model and there are several light settings, so if the light is a bit on the bright side, you can turn it down. Using the light I can pick out some fine detail without the need to resort to a magnifying glass. It is easy to set up and very stable. I do not have a dedicated room for my modelling, so I end up working on the dining room table a lot. Once clamped in place, it is very stable and easy to control in terms of how close you can put it to the model. You can also fully extend the top part of the arm without the lamp coming out of the clamp due to the altered weight distribution. The only thing that I would point out is that the lamp cannot rotate 360 degrees and it can be a little awkward to move it around until you are use to it. There is a pivot guard just above the light that can get in the way of it's movement sometimes. This is only a very minor issue and once you get used to dealing with that, it becomes easier. Because it is so minor, I have kept this to a 5 star review. If, like me, you are someone who is coming back to a hobby due to staying indoors and need some light to help you, then I recommend this light.

Mine is CCT with clamp. DIMENSIONS and BUILD No-one has mentioned size? Vertical height (length) of first arm is 50cm, second arm is equal length. My desk is 82 cm deep, so arms will easily span it from base at back corner to mid front for close work. Arms are 10mm tubular square steel (magnet test), joints are sturdy (but if need adjusting then you have to use an Allen Key, no thumbwheels. prossibly better that way.) Shade is hard plastic (ABS?), feels tough but not as reassuringly solid as the arms. It generally rotates to any usable position CONTROLS One switch does it all. Press once for on, then single presses for Warm, Daylight, Cold. Press and hold puts it into a cycle of dimming then brightening, just release at the right brightness. Two quick presses to switch off. GRIPE Switching on always sets it to daylight, mid brightness. It does not remember last setting. Not a showstopper, and at least it's a useable default, but still a tad annoying. POWER Power is from a 28 volt, 0.75A plug-in (not inline on the cable) "brick". Height and thickness are about twice that of normal 13A plug, cable exits at the bottom. Cable length ~1 metre. Perfect for fitting to desk if you have, say, a 4-way splitter attached to the desk. Problematic for a side table further away from a wall. Good news, power adapter terminates in a ~5mm connector which plugs into the lamp at the base. This makes it easy to plug the brick in, route the cable through small holes if needed then plug into lamp base. BRIGHTNESS On cool setting, at 100%, it is bright but I wouldn't agree to "super bright". E.g. working on something with lamp 10 cm above the work, and face 7cm away from work, wearing a 3x eye loupe is just comfortable. IMHO, super-bright should be TOO bright at that range! But it helps my poor old eyes see miniature stuff! BASE CLAMP Made of some sort of steel alloy, magnet attaches but not as strong as usual, maybe a plastic casing? (Unlikely.) However the clamp is quite substantial, lamp is very stable. Max thickness clamp can span, ~65mm Clamp "overhang" (how much of top of clamp sits on table) 50mm Clamp "thickness" (how thick is clamp where it comes through, say, a hole) 30mm My desk is 25mm thick and the cable entry hole is 45 mm, the clamp just hooks in comfortably (at an angle then straightened up.) WARRANTY Apparently it has a 3 year warranty if you register. I'm not holding my breath that that counts for much!! VALUE FOR MONEY Hmmm, £120 for an LED panel on an anglepoise with a clamp is quite pricey (you can get a microphone boom arm for £19?) £10 extra for Colour Control feels OK. But why is the version with a stand alone base so much more?? In general, there aren't many alternatives and I feel this is a good lamp overall (as long as it holds up, my experience of LED panels in ceiling lights has been patchy) so it just feels high, but not a gouge.

Delivered within 18 hours. Packaging robust. Quality of the materials and finish supreme. The light emitted is bright and clear. Superb for hobby use.

I've bought a few different light brands in the past to help me illuminate my painting area for painting Warhammer minis but each had their own issues. Looking online, the most commonly recommended light was the Neatfi XL but I was a little hesitant with spending so much. I wish I'd done it earlier, I'd have actually saved money in the long run from buying cheaper lights hoping to achieve the same result. The light is fantastic, the size of the light covers my painting area easily and thanks to the adjustable brightness, I can make sure I have the right amount of light for what I need. The manoeuvrability is also great; I can easily shift the light to where I need it. For example, I can move it to the side and swivel the head to ensure I find light up my minis for when I'm airbrushing (using an old Amazon delivery box as a airbrush box). I bought the non-CCT version (can't change the colour temperature) as I only need a daytime white light for painting. I would recommend this easily.

We bought two of these lamps, one for 28mm model painting and one for crafting. The are well made, simple to operate and give a bright natural light, very close to daylight. Considering the price of other similar lamps they represent good value for money and a small extra bonus is that they look smart too. Assembly is simple and takes just a couple of minutes to unbox the lamps secure the clamp, place the arm in the clamp and then place the lamp in the position you want it. The clamp is reasonably large so you do need a reasonable lip on your desk or table to secure it in place. The lamp head has a locking facility so it does not move around once in position. I would recommend this product.

Had this item almost three years, it started to flicker and then stopped working, neatfi customer service replaced it very quick and painlessly. Its a very good lamp i use it for painting minis highly recommend, worth the money, good company happy with the customer service.