Bestauto Hydraulic Wood Splitter Pump 3000 PSI 2 Stage Log Splitter Pump 13 GPM, Hydraulic Gear Pump 3600 RPM Aluminum Log Splitter Pumps 1/8" Keyed Shaft for Gas Log Splitters/Hydraulic Power Units

Works great, my splitter pump was ok to use, just wasn't enough gallons per minute. This new pump works much better now. After adjusting the valves. Total time to remove and replace the pumps just under 1 hour.

I had bought two of the pumps and installed one right away, the second one I installed 11 months later and it had a problem of leaking fluid. I notified them of the problem and stood behind their product and are sending me a replacement pump. Good to work with..

arrived fast, considerably less cost than the local Tractor Supply or power equipment dealers for a 13 GPM pump. Easy install on an older 27 ton White splitter with a 6.5 HP Harbor Freight Predator replacement motor. Running quietly, not whining or growling. Split a couple easy pieces of hemlock for a test, no issues. If it lasts, 5 stars. If it doesn't, 0 stars.

Installed easily using a love joy coupling to the engine. Replaced a rural king brand and it definitely has more power and the 2 stage works great. Very good quality and build. Came will all needed fittings.

Nice pump for a reasonable price. Replaced the hydraulic pump on my log splitter with this one. The only downside is the 1" inlet pipe thread. IT would be better if it were NPT thread instead of a fine thread so you could install a barb hose fitting as 1" hose is expensive but otherwise this pump it works great. I'm log splitting again.

I purchased this unit in 2022 to build a log splitter. I completed the project in the spring of 2024 and used it so split about 2 cord of wood. It started leaking in the fall of 2024 and now it’s leaking pretty bad. Kinda disappointed in this pump.

Looked like a good pump???? but as soon as I put oil in it started to leak on the input shaft. Taking the pump of the rig I saw that the pump housing is over machined so the seal just drop into the housing not sealing. With this it mean that the bearing that is housed there is also lose and basically of no use. So wile we on the problem side the mounting holes that you spec. is also way out. Can not test the unit to see if there is more problems. I also did not receive any seal ring as stated. All and All bad quality

Bought this pump to replace the leaking original pump on my 27 ton troy built log splitter, and I couldn't be happier. After getting the correct adapter fitting for my existing hose from Clearwater Hydraulics and hooking everything up I ran the log splitter non stop 4+ hours except for gas refills, right out of the gate no problems at all so I am very happy with this product.