EKWB EK-Quantum Kinetic TBE 300 D5 PWM D-RGB Pump Reservoir - Plexi

This is my 2nd D5 pump...work great.

I wanted the biggest baddest pumps i could find and EKWB did not only come through, they included all the fittings for my rig just in case the pump had cavitation for air bubbles. I still need to wipe down some spots where that coolant ran down but I am happy with the results. I did have to order 6ft sections of PTEG tubing from Grainger as the standard 3ft were too short. All in all great pumps!

Lo que más me ha gustado de esta bomba es que es robusta y silenciosa. Cumple sobradamente su función. La recomiendo.

Build custom loop to replace an extremely poor designed factor all in one unit. As for pump I'm very satisfied with it, cpu temp nolonger hits 90°c. My only complaint is that non of the led lights are working. After contacting seller I decided to keep the pump instead of disabling my system to receive a refund since they were out of stock of this pump

Such a good pump. EK> anyone else

The unit is supposed to ship fully assembled, but the bracket that holds it to the mount was not screwed down and was missing the screws. The fit is so extremely tight that you have to press down against a surface and put your weight into it to even make the holes line up. I managed to find a screw with the right width and thread, but it's just barely long enough, and so far I've been unable to get it secured, leaving my PC out of commission (this was a replacement for my previous TT pump that was failing and could no longer put out enough oomph to clear bubbles - - but would happily suck any that do make it through straight from the inflow tube to the pipe intake with no chance to escape and bleed off). Annoying, but not really EK's fault, the stock mount doesn't fit anywhere on my TT The Tower 900 case, nor does the recommended adapter fit the case's pump mounts. This is more a TT issue, but still something to be aware of, as it's a case purpose built for fancy, showy water cooling builds. I've read others had no issues drilling holes to mount where it's intended, but unfortunately I have no drill to do so.

While it is good quality in both build and materials, there is a major design flaw. The front ports where the input and output attach are VERY hard to work with because of the overhang. It is a MUST to put two extensions on those to be able to attach anything else there. I had to take out the needle nose pliers to tighten the extensions because I couldn't get my fingers in there. This, inevitably, left a few small spots of scoring on the extensions. Once I got it in place and got everything attached, it operates very well, and the higher speed over my old DDC pump (literally three times the flow rate) has reduced my GPU temps by 10C. I recommend it, but with the caveat: know about those attachment points, and what it will take to work around them.

Works part time.

I bought this Pump Res Combo almost a year ago to the day, I've been water cooling my Gaming PC's for around 20 years and currently have an EK intel velocity CPU block and EK full RTX2080ti block. and this quantum kinetic pump combo. I have had several types of pumps Laing, Swift tech, Alphacool over a long water cooling history, one I still had as a back up and yesterday did i need it! yes Laing make the majority of pumps now days but wasnt always the case. A 17 year old Swift tech DDC is whats currently propping up my system after a total failure of EK's D5 pwm pump banging and clanging stuck!!! caused a total system cooling failure and shutdown, then onto a total system tear down!!!! 6 months after a Hardline pipe install that's all had to be chopped up to get the pc running again with a separate pump & res in a temporary loop!! once out and inspected, no debris, no residue no nothing in the impeller assembly, just a failed pump! ( my preferred cooling method lab grade distilled water) there's no gunk! nothing to blame! I'm very disappointed EK and left with limbo rig having to wait on RMA, rebuild and re pipe! looking for a suitable quality replacement Corsair stuff has to much plastic!! AquaComputer stuff looks to be the way forward ! Edit: I don't think ill ever buy EK pumps and Res again, I decided on an AquaComputer Ultitube 200 pro Next and what can i say wow its been in a couple weeks, the aqua suite software with it is superb, EK I think you've some serious catching up to do and it was only about £30 odd more than your top offerings!

Arrivato prima della data di consegna,imballaggio impeccabile!con le dovute protezioni, materiale di qualità, luci spettacolari , unica pecca una pompa da 200 euro dovrebbe avere compreso il supporto per installazione della pompa, e invece ,va acquistata separatamente , io ho preso il supporto per mettere la pompa in modo orizontale, per il funzionamento avrò modo di testarla per bene

The seller could not even distinguish Finland from France and sent it to a random location in France! I highly advise you to check that you are not ordering from doc micro on amazon as they have thus far been incompetent with all my orders! I even ordered it long before the christmas craze so it would arrive in time and now the gift is ruined.