E-DA Flexible TPU Filament 1.75mm 1kg 3D Printer Filament TPU 3D Printing Materials Dimensional Accuracy +/- 0.05mm Blue

Great stuff. Enders 3.Turn ya heated bed OFF.Turn ya cooling fans OFF.Print speed 30 to 40 MMS.Retraction OFF or MINIMUM.Exteuder temp 225.Use a raft for easyness.PRINTS GREAT. PERFECT ADHESION..Printed some things. Then 2 months in a bag. And straight back to printing good.

Lots of reviews said how difficult any make of tpu was to print. Decided to try this brand after undertaking research and reading reviews. I was pleasantly surprised as I’ve had no difficulty with my prints on my voxelab printer. Bed adhesion is usually very good and although I’m a novice 3d printer the following settings worked well for meExtruded temp 220, bed temp 50. Feed rate 40m/s with 2m/s retraction. I printed skirts on my prints to make sure I had a good flow before the print started. The only other change I made was to fit a Capricorn bowden tube. Pleased with results to date. First print was an iPhone 7 case. A bit ambitious but it turned out really good

Used this whole roll rather quickly on my Ender 3 pro, had to mess with some slicer settings and temperatures for the first few prints but once that was dialed in , every print after that was excellent with very little stringing while also managing to print overhangs quite well compared to other tpu filaments I've used. Overall would definitely recommend.

Great filament but since it's tpu will need to be dried before use once opened for a day. It prints out perfectly with great adhesion but remember to use slow print speeds! 20-30mm/s no more.

This is the first time i have tried TPU. I got great results with a Swiss micro direct drive on an Ender 5. 205 / 60 c. 1.2 @ 40 retraction. Have ordered another roll already.

I've made a few phone covers and some keyrings so far. Really easy adhesion to glass bed and great smooth finish.If using a stock hot end do a temp tower and retraction tower first.

This is my first time using TPU, and took a couple of tries to get my temperature settings correct.I'm running Direct Drive on my Geeetech A10M, so I turned retraction off and got hotend at 200 and bed at 60 👌🏻👍🏻