Fan Clutch Wrench Set with 32mm Nut and Water Pump Pulley Holder for BMW E34 E36 E39 E46 E90, 2pc, Silver

great tool to have for 2004 BMW 325i

Good

The Orion Motor Tech Fan Clutch Wrench Set is an absolute must-have for any BMW owner tackling cooling system maintenance. With its sturdy construction and precision engineering, this set ensures effortless removal and installation of the fan clutch and water pump pulley. The inclusion of both the 32mm nut and water pump pulley holder covers a wide range of BMW models, from E34 to E90, making in the Orion Motor Tech Fan Clutch Wrench Set today and breeze through your cooling system repairs with confidence.

Wanted to use this to remove the fan on my 95 M3. 1. The holder part of the tool does not fit. The fan bolts are staggered, meaning that two bolts are closer together than their counterparts. Basically, the bolts are spaced like a rectangle, not a square. The tool is meant to account for this, but both sides of the tool do not line up with either spacing option. 2. I wound up getting one hole of the holder tool on a fan nut. Swung it up so that it was pressed up against the second nut and would be sufficient to hold things in place. Fit the wrench onto the fan nut and turned. Wound up bending the holder tool. 3. Used a different part of the holder tool to lock onto one nut and hold it in place. Wrench part spun on the fan nut, rounding off a part of it. Unreal. Don't buy this junk. Google the real trick of being able to remove the fan without this. You'll need to take the fan off by taking the bolts on the front off (easily accessible) and removing the outer fan shroud. From there, it's going to be a lot easier to get to the back bolts with the right wrenches.

The holes intended to capture the fan screws didn’t quite line up but I made it work. It’s definitely on the cheap side. Not the kind of thing that’s liable to break, just fiddly. I used this in a 2000 BMW Z3 2.3 roadster

I really wan not expecting much but when these showed up I was first impressed with the weight. These will not bend easily. As far as it’s functional use…I removed the fan clutch easily. I used it on a 2000 bmw e46.

Good and strong and got the job done. Highly recommended

Worked great, needed a slim wrench for a cam job.

the holes may be misaligned but it still worked and i got the fan clutch out

Worked perfectly for removing the fan on my 2001 E46 330

Took a bit to align the tools, but they worked for removal of the fan from my e46 BMW.

Holes dont fit well, slips off bolts easily, and metal cracked and bent during use, terrible product, other items from this company suck too.

Gets the job done but not easily, they're almost a bit too thick and it's difficult to get a good grab around the bolt behind the fan clutch nut. I've seen some mechanics where they bend the end a bit too make it easier to reach in from the top which would have been a nice feature, but it good the job done so I can't complain too much