T825051 Torin Hydraulic Low Profile Trolley Service/Floor Jack with Single Piston Quick Lift Pump, 2.5 Ton (5,000 lb) Capacity, Red

Solid jack would recommend

The jack works as advertised. I was able to jack up my Porsche and place on 4 jack stands. This Jack had plenty of power to lift a side of the car at once (albeit not all high enough to place jack stands under both front and back). The caster wheels do not align and roll when the jack moves and they skid along the garage floor, kind of a scary feeling, but it did work. I read reviews of it coming down too quickly, this is true with any jack if you open the lowering valve too fast... I did not have an issue with it coming down too fast, just slowly crack open the valve and the car settled like a feather. For a compact jack I really like this one. The case is handy although it came damaged and has several broken pieces, it will hold and secure the jack.

Used for car lifting. Due to modest size, it is suitable for carrying about in car on trips and not so heavy. For my 4WD truck, it does not have enough lift capacity nor weight range (but I have larger jacks for that). Great for most uses about the home garage. Has proven very useful.

This is great jack for the price. The low height is good enough to fit under my lowered car. Its not quite a low profile jack for the Spec Miatas, but it is good for the Mazda3 on lowering springs. The lift height is good. Lift if a little on the heavy side, but the handle is great and easy to use. It takes a long time to jack it up, but I am still rating 5 stars because the value. If you are buying this, you know you are not buying a repair shop or race shop quality jack based on the brand and price, but you still won't be disappointed.

This jack does the job just fine. I recently changed the brake pads and rotors on my car, and this jack was up to the task with no problem. It withstood some torquing and moving with no problems (although it's always recommended to use jack stands if you're going to be working for extended periods of time on a car). The big advantage is how fast it is to get your car off the ground - seconds, literally, is all it takes to lift your vehicle. It is a HUGE improvement over the basic/cheapo jacks that come with most cars. It comes in its own case, and is portable enough that you could carry it in your trunk if you wanted to.

Pros and Cons.... Pros: It's CHEAP... $25 for a hydraulic jack? That's pretty darn cheap. Comes with a carrying case. Relatively sturdy looking construction. Cons: It's HEAVY. I've had cheap hydraulic jacks before, but I feel like this is heavier than those. The welds also look like a 6yr old did it wherever it was made (ok... maybe it was). All in all, I bought these as cheap jacks to keep in the trunk to jack up the car in the case of a flat tire. I do not plan on using this for anything else, certainly not for working on cars. You have to purchase this jack with the knowledge that they're cheap overseas made jacks that may fail a day, week, month or year into service. I don't even know where you can service these jacks and either fill with hydraulic fluid or bleed. If you plan on purchasing a jack for home garage use, DON'T buy this one. Buy a better constructed, more expensive jack that will have less of a chance of busting on you at the worst moment.

Work great I had mines for 3yrs now

I have several bottle jacks and have always wanted a floor jack. After 40 plus years I finally decided to get one. I’m a shade tree mechanic and not afraid to tackle my Cub Cadet lawn tractor. This floor jack should be a lot of help when I need to raise the tractor to take off my blades or replace a belt. Did buy a couple of jack stands as well. Anxious to try this out. Seems well made and having a carrying case will certainly help not only store but lug it around.

I purchased this jack to be able to perform routine maintenance on my car, in my apartment building's parking garage. I made sure to bleed the jack and purge the hydraulic system of air before first use. There are instructions in the package as well as several YouTube guides on how to do this. I was able to lift my BMW E46 which weighs around 1,700kgs. Therefore this jack is more than suffice at raising one corner at a time. However, I did not feel safe raising the car from the engine jacking point raising 2 wheels. It managed the task but I did not feel comfortable doing so. Raising one wheel at a time using the car's jacking points/chassis rail felt safer for me. Of course, I used 2 x 2 ton jack stands - also made by Big Red - to support the car using the jacking points. I then used this trolley jack to provide secondary support on the jacking point under the front subframe just as a safety measure. I also placed wood blocks (around 20cm in height) under the front wheels as a third safety measure. I have used this jack about 9-10 times over the past month for various maintenance tasks, and it has held up extremely well. It's compact size means I can keep it in the boot without sacrificing too much trunk space. If you intend to lift both wheels (either front or rear) at the same time, or have a heavier car i suggest opting for a full size 3 ton shop jack instead, preferably low profile. These are significantly more expensive however. This jack not only has weight restrictions but also will not lift your car high enough for any job besides tire changes. My BMW E46 sits quite low to the ground and i actually had to use the factory scissor jack to raise it a bit in order to be able to slip this under the jacking point/chassis rail.

failed on the first use and its not even the "torin big red jack" its another generic brand that looks similar even the box had generic writing on it

Very pleased with this product. Top quality gets the job done. Highly recommended

This little jack with carrying case works perfect for ny Caravan. Fast and easy lifting...

My dad really loves this jack it really save the cost of him taking the car to the mechanic to get it changed.