PARMIDA LED Swivel Under Cabinet Lighting, Hardwired or Plug-in Installation, 12 Inch, 8W, 5CCT Color Selectable - 2700K/3000K/4000K/5000K/6000K, Rotatable Lens, Dimmable, Linkable, 120V, 640LM, ETL

I was pleasantly surprised with the quality of these lights. Knockouts were well placed and relatively easy to get out for hardwiring, quick connect wire nuts worked well and secured my hot/neutral/ground tightly and the cavity had adequate space for tucking in the wires (the 12" was tight, and had to add a short pigtail extension to the ground wire to reach the quick connect, but there was still space to tuck it away). The light box seems sturdy on these units. The second and third light in each zone connected easily without opening the light box vis-a-vis the supplied quick-connect cable. All things considered, this is a well thought out product for installation into multiple cabinet zones and via hardwire or plug-in power supply.After install, the three light temperature choices are a real plus...we prefer the middle setting which matches best with our overhead lighting, but this preference could change as we change bulbs in the main kitchen lights, so good to have the choice built into these lights.If these last 50,000 hours as advertised, they deserve the 5 stars I have given them after the first week.

So far I’m pretty satisfied with this light. And unless it stops working sometime in the near future it does exactly what it supposed to and definitely provides enough light. So after installation I can say that I am very satisfied.The only downside I can see to this light is that there’s actually two mounting mechanisms in it. One is your average slide on over screw heads. The other is two very narrow channels (through-fixture) for a long thin screw to go all the way through the body and screw into the cabinet.I ended up having to use the slide-on mechanism only, simply because of local constraints when I was installing it.But to use the slide-on version you have to partially disassembled the fixture which isn’t terribly too hard except getting it back together once the fixture’s in place is very difficult because there’s lots of small wires inside the body that like to sneak out and interfere with clipping the panel back on.I recommend that you tape down the wiring inside the body after you take the underside panel off but before you mount the light.This will hopefully make a neater bundle and therefore be easier to reapply the panel with all the wiring inside.The installation would’ve been made easier if there had been three changes to this design.1. Instead of making the two channels for the screws so small I would’ve preferred them to be much much larger. Then I could’ve confidently attached the fixture with just the through-fixture holes. In reality these holes currently only allow about a 3/32 size screw through. I wish they were a lot bigger.2. Perforating the top fixture’s metal casing to create small wire clips that could’ve held in the entire wiring assembly neatly to help ease of installation.3. I wish this had come with a paper template for all the top mounting holes. If a long sheet of paper had been included that would’ve allowed me to tape it up to the cabinet and then pre-drill the holes that I needed then I could’ve used both attachment mechanisms at once and had a really good connection, with a real easy installation. As it stands if you’re just one person, you have to hold the fixture up while creating marks and or drilling pilot holes. A simple paper template would’ve allowed one person to easily perform a professional-looking installation.

It's just an under cabinet light you say? Maybe, but it's clear someone put a lot of thought into it's design. I thought this was a bit overpriced when I placed the order (~$30 for the 12" model), but in hindsight I believe it's a good value. The default cord set and connectors are solid and well thought out. It will accommodate serial installation of additional lights if desired. It can also be hard wired, and the housing includes several knockouts to run the wire through different sides of the housing (a small NM cable clamp connector is included). The adjustable lens moves smoothly and is a nice touch while the color level switch has a solid feel to it. In an age where most items are manufactured to a 'disposable' standard, it's nice to see a well engineered product made with quality materials. Will have to wait to comment on durability, but what a nice surprise.

These replaced fluorescent hard wired fixtures that were much wider and bulkier. They work well with a dimmer no flickering and dimming comes is a necessity with our kitchen fully open to the den. Setting the color temp was a big plus - it is amazing how the color temp changes the look of our granite and backsplash. They were a little difficult to install - working under the cabinets is a pain to be sure, but fitting all the wires in while closing the fixture was difficult probably could have made it just a little bigger to easily accommodate the wires which would have helped greatly.

I replaced the original halogen under cabinet lights in my kitchen with these. The house wiring came out in the center of the fixture locations and that did not work with the knockout locations on two other models of fixtures I tried from the local home improvement warehouse before going for these.These allow for wire entry from the center or ends of the back, so it solved my problem. These also were easier to mount with holes through the whole fixture, rather than inside where the fixture required reassembly after cabinet attachment. Very happy with brightness and light distribution.

They say you get what you pay for, but in this case I got more than I expected. Easy to wire to almost all applications. Hardware included. Easy mounting. Then there's the light itself; Three selections of brightness PLUS the light bar swivels/adjusts to angle the light towards where you want it. You don't have to compromise with this lighting kit! I'm a HAPPY CAMPER!

Every under counter light installation is different, and the requirement underneath each cabinet can be different as well, especially in an L-shaped kitchen. Installing these lights as far away from the wall as possible under each cabinet, always you the flexibility to adjust them in the perfect direction — it’s REALLY a game-changer!

Light has 3 light settings, very nice, the led light rotates and is adjustable, very nice, a bit expensive, absolutely no instructions included, difficult to install, says it can be hard wired or plug in, we could not hard wire the light, so we installed a plug in where we wanted to install the light, had hoped to hard wire it in.

A bit expensive but work very well

So far I am happy with this light.