High Temperature Paint, High Heat Resistant Paint, Weather and Moisture Resistant, 8 Fluid Ounces, Aluminum

Very good brush on black paint for high heat grills. Air spray is even better.

Used this to paint the calipers on my C5. I wanted a "stock" looking gray. Not a fancy shiny silver that is available in caliper paint. This worked great, looks great and should last just as well as caliper paint since its hight heat and solvent resistant.

Sprayed a 57 year old Austin Healey exhaust manifold with this paint following the directions perfectly. I noticed an "exhaust to tailpipe" bent stud and decided to replace it. It refused to come out while trying ALL normal methods. I finally took a torch as final effort, heated the exhaust almost cherry red, thinking I would have to repaint the whole manifold. I was able to break the bent stud loose and as I let the manifold cool, the area I got so hot, looked identical to the rest of it!!! The paint was still perfect in color, adhesion and looked perfect!! Great paint!!

I used this to paint an Exhaust and Intake manifold on a 81 CJ5. I had to replace the manifold gaskets, so I took the opportunity to clean up and paint the manifolds. It took only 1/4 of the small 4oz can to paint the manifolds with two coats. I waited 24 hours and installed back on the jeep. There was some smoke for about 30 seconds and then manifolds were back to normal. I've put around 150 miles on the jeep since painting and the manifolds look great. I read so many posts about POR-15 being a single can use and done. If you clean the top of the can well the lid will not seize to the can. I've since reused the paint on another project and I'm down to 2 oz remaining and its as fresh as the first day I got it. Clean up and properly secure and this will last till its gone. To keep the rim of the can clean I recommend putting some blue painters tape around the seal during use and remove and clean up the top before securing the lid. I'm so comfortable that this can be reused with proper care that I plan to buy a gallon can on my next purchase.

POR-15 High Temperature Paint, High Heat Resistant Paint, Weather and Moisture Resistant POR15 advertisements used to be to the point. Seals against rust, apply to clean prepared surface, needs a top coat to prevent weather erosion. etc. I thought I was buying the same product but this one seems different, and very little information on if it is the same as the original POR15 I have used in the past. So whatever it is I bought, it went on ok, used a brush to coat some metal that was prepped and painted with POR15. It seems ok. Time will tell if it was successful. It still has the same qualities of drying hard, though in the past over time the POR15 tended to "soften" and would peel off. I didn't expect that I am assuming this is the same product and as we all apply things differently, I may have done something to cause the peeling after 10 years but going soft was not expected. I WIll RECOMMEND this with caution that you research the product well before purchase. I do not know the seller nor did I get any money or product for my random review. 240916 1103

Used this paint to coat cat back exhaust system on my truck. This is some super tough paint. Exhaust looks great and paint holding up flawlessly. Be sure to properly clean and prep surface to be painted and you can expect great results from this excellent quality paint. Also have used the POR brake caliper paint with similar success.

I painted my ugly tall heat pipe and the color came out great.The paint is for heat

Good