Shielded RJ45 Cat6 Cat 6A Connectors - Pass Through Connector Gold Plated 3 Prong 8P8C Modular Plugs for FTP/STP Stranded Ethernet Cable & Solid Wire - 50 Pcs/Jar

The seller contacted me to inform me that they had updated the description with a lower maximum diameter allowed for the wires to 1.16mm. The cable in my original review has 1.19mm wires (solid core + insulation). I am glad the description is now reflecting the product correctly. -- original review Doesn't work for 23AWG I have crimped quite a number of shielded cat5 for work before. I have some idea about what I am doing. Technically, with enough persuasion, you can get the 8x23awg in this connector. But this an incredibly frustrating experience. I had to re-cut and retry 5 of 6 times before I could get one successful crimp. After 1h30 I had the two ends of a test cable crimped. Clearly the tolerances are too tight. Not only it is almost impossible to pass all the wires through without bending them. And then fighting with needle nose pliers. But you can also easily damage the insulation or the wire itself after repetitive bending. Any fatal mistake, and you have to cut 10 more centimeters out of your cable and try again. Then came the issue of cutting the protruding wires. You would think it would be quick work with a pair of flush cutters. Sadly, the plastic tab of the connector gets in the way. You can never cut them flush. Which means that they wont fit in many rj45 receptacle. I tried using a thin blade to cut them flush, but that only mangled the wires and probably shorted some together. Which leads me to the final cable test. Two wires, where shorted together. My guess is the insulation stripped during the insertion, and they got somewhat crimped together. 24AWG or thinner would likely fit well in the connector. But you would still have the issue of cutting the protruding wires flush.

Right size holes make all the difference! A ran some cat6 underground grade and when I went to put the connectors on it was a nightmare! I did order some connectors that said they were Cat 6, but they were not able to handle diameter of the twisted pair wires. These connectors have 1.2 mm holes and with just a little jiggling, slide right through. After crimping I have no issues whatsoever! They are shielded but I don't know how much of a difference that makes. Came in a nice plastic jar and overall seemed to be high quality.

I was able to use these for patch panel cables for my shielded Cat6A cables. You just need to cut, untwist, straighten and insert the wires... You have to pull the extra length of wires out, trim them right at the edge and the pull the wires back a bit before crimping... It's the most simplest technique I've ever used so far... Here is the problem with this for me... I ended up buying two of these, because about a dozen of the connectors were bad... Ended up making some measurements of cable length harder to maintain due to me having to cut and redo the ends again...

I have been wiring networks here and there for many years, and just finally figured these out thanks to whoever invented these, these just made wiring and basically life easier, and just gives you no chance to make any mistakes on wiring. I have purchased these first time to try for my small business Network system setup, and I literally got the job done half the time I supposed to get it done for. Greatly appreciated ease of use Well made sturdy plastic 3 prone gold plated contact tips Pass through rj45 modular Economic Zero failure chance Latch is quality, doesn't break Guided paas through channel makes it much more easier. I Would definitely recommend these connectors when considered price and quality. Buy these without hesitation. I have searched for hours, these have the best price and best quality. NOTE FOR THE SELLER/MANUFACTURER: WIRING SCHEME YOU HAVE ON LABEL 568A IS CORRECT BUT 568B IS SAME ON THE LABEL WITH 568A, LABEL NEEDS CORRECTION 👍

Excelente

Extremely frustrating! I have been terminating cat 5/6 for over 20 years and I have never had as many issues as I have had with these connectors. They seem to have about an 80% failure rate and a tendency to short out pins 7&8. Each termination requires multiple crimp attempts. I thought maybe my crimping tool was bad, so I ordered different brand pass-through connectors but didn't have the same issue with my crimping tool. I threw these in the trash and will not reorder this brand again.

These things are great! I was working with some outdoor rated STP Cat 6 and couldn't get it to work with standard connectors. I bought passthrough connectors for the first time and that was an improvement but I was still having a rough time getting all of wires in and, once I did, I still had problems where all 8 wires wouldn't connect. I finally tried these and the staggered wire connectors were exactly what I needed. My wires went in super quick and easy, and every connection I've made has worked perfectly. I wish I would have started here.

I had 12 connects to make on CAT 7 23AWG and CAT 6 23AWG cables. These were great to install and they work fine. The pass through capability is the best way to do this particularly with being color blind and I wanted to triple check the wires before doing the crimp.

ممتاز

As advertised.

Articulo coincide con descripcion no e usado aun ningun conector

Poor quality

Pass through connectors. Why would you use anything else