TotalBoat Wet Edge Topside Marine Paint Premium Polyurethane Coating for Boats, RVs, Exterior Trim, Fiberglass, Metal, and Wood (White, Gallon)

TotalBoat Wet Edge is hands down one of the best topside paints I’ve used. The application process was incredibly smooth — it levels beautifully, even with a brush or roller, and dries to a high-gloss, professional-looking finish. One of the best features is how durable and long-lasting it is. It holds up well in tough marine conditions, resisting UV rays, saltwater, and weathering with no peeling or fading even after extended exposure. The coverage is excellent, and it’s available in a great selection of vibrant, lasting colors. Whether you’re touching up or doing a full refinish, this paint gives a strong, clean, and polished look that really lasts. If you want a reliable, high-quality marine paint that’s easy to work with and delivers exceptional results, TotalBoat Wet Edge is the way to go.

First, I had never painted a boat and was dubious about reports of near-spray quality results with any of the boat paints. My boat is old so I figured anything would be an improvement. I chose Total Boat mainly because it was easier through Amazon. I mixed two parts Yellow with one part Fighting Lady. (Can't add pigment. You have to mix Wet Edge paint instead). I was amazed at the smooth finish of the final paint job. I think that it is 85% of a spray job. If I had thought that it would turn out this well I would have been more careful with the primer coats and prep. Advice: Painting outdoors is challenging. Each coat takes several days to dry and then you have to fight rain, humidity and temperature. I finished it in the garage and it was a snap. For me, the primer was really thick, went on with a lot of orange peel and it dried slowly, and it was clumping during sanding because I didn't let it cure (all problems were user error). When the primer was cured it was easily sanded down and may have helped with smoothing the fiberglass imperfections. The primer prep is he key to a quality paint job. Take your time here. The paint went on well. The first coat had some orange peel because I put it on too thick and didn't have a quality paint brush. It was remediated when I sanded it down (again, wait for it to cure!). I applied the last coat uncomfortably thin with tip and roll, and it turned out marvelous! It took 1 gallon of primer and about 1/2 gallon of paint for an 18' boat. Use a 1/8" foam roller (https://www.amazon.com/dp/B0168S0ETE?ref=ppx_yo2ov_dt_b_product_details&th=1) for the areas you want to look perfect, and use a true badger hair brush (https://www.amazon.com/dp/B000N9LE80?ref=ppx_yo2ov_dt_b_product_details&th=1). It is worth the money for this task.

Great stuff, exactly as described would definitely recommend buying, i believe it will last for years to come

not sure why others are bad mouthing this product, much like the primer the paint went on great . i choose not to thin it out and it was perfect, i used 1 gallon of the light gray and mixed in a quart of black. the finish is outstanding. don't listen to the haters that this paint doesn't dry, it was dry to the touch in 4 hrs. i will be applying a 2nd coat tomorrow.

For inexpensive paint, it's pretty good. I thinned %10 with thinner. Rolled with foam rollers and it laid out flat, looks very good, pro even on fiberglass. Took a few weeks to fully cure as it was soft enough to scratch from a fuel tank at first, but it hardened up.

After the first coat, which was well thinned, I was tempted to call the job finished. The way this paint flows is incredible! Granted, it's been nearly 30 years since I've painted a boat, and have never used a paint like this before, but after the first coat it looked so good that even The Bride (who is a stickler for "perfection") thought I was finished with the job. I have never looked forward to painting before, but can hardly wait to find something else to use the remainder of this paint on. After the second coat had cured, I intentionally scratched it to see how strong it was, and I am really impressed with the quality. When the paint was delivered, the can had been damaged in shipping. There was a serious dent in the edge of the lid. Had I removed the lid, I would have been unable to re-seal it. I asked Amazon for a replacement, but found I could not return it because of some legal reason. After a short chat with customer service, I was told to keep the dented can and to be expecting another can. When the second can was delivered, it too had a small dent, but this was in the side and the lid was undamaged. I was impressed with the speed with which the replacement arrived, and it made me happy to be an Amazon customer. TotalBoat is an incredible company, and I encourage anybody who is even slightly interested in top quality products to review their extensive videos. I've spent hours learning new techniques and I've been messing with boats for years, but this is the first re-painting I've done in probably 30 years, and the technology has progressed a lot. This painting job was actually fun because of TotalBoat's quality and sharing of information.