- MP00205B 12V 1000mA Automatic Battery Charger, Battery Maintainer, Trickle Charger, and Battery Desulfator with Timer Protection - Grey

This is easy for anyone to use and understand. It has lights that indicate what mode it’s in and the function it’s performing. It worked out of the box. I measured the output voltage while it was in charge mode and it was 13.8 volts. You can set it up on the battery and forget it. The supply cord is a good length as are the leads to the battery which has alligator clips. It also comes with leads with ring terminals for a more permanent installation. Model MP00205B is for all types of lead acid batteries from 0 to 100ah. It’s well made and I expect it to provide good service for a long time.

I bought this charger to help maintain the battery on my zero turn mower over the Winter. It did a quickly topped off the battery and went into maintain mode within about couple of hours. The added bonus is it is 1000mA and automaticall desulfates the battery if needed. Also hard to beat the price for what you get. I ordered a second one for my golf cart battery.

Motorcycle batteries have gotten expensive. I just shelled out $60+ for a battery for my sport bike and would easily have spent more if I hadn't found a good deal. Deep discharging a typical lead acid or AGM battery repeatedly is a good way to kill them. They're just not designed for that. But I only get a chance to ride once or twice a week, and probably won't be riding for much longer since winter is approaching fast. To keep my battery topped up between rides, I bought this maintainer. The reviews are good and it appears to include desulfation and absorption charging stages, not just a straight trickle charge. It's also supposed to be safe for AGM batteries, which is what I currently have. Installation was simple. One of the harnesses supplied with the charger has ring terminals on the end. I connected these to the battery terminals and then routed the wiring harness along the frame of my motorcycle so that the free end emerged near the rear wheel. This end is equipped with an SAE connector, which is a type of polarized connector commonly used on battery maintainers. Operation is simple. When I park the bike, I plug the SAE connectors (one on the bike, one on the maintainer) together. That's it. I have to make sure the wire doesn't fall on the hot exhaust (I just drape it over the rear turn signal), but this is about as straightforward as it gets for a battery tender. The battery can stay buried in it's compartment under the seat and I can plug or unplug the tender in less than 10 seconds. I did purchase caps for the SAE connector, which keeps dirt and road spray out of it while I'm riding. The caps have a retaining ring that attaches them to the end of the cable. Remove the cap to plug in the maintainer. When you unplug the maintainer to go for a ride, reinstall the cap. Simple. I also put a dab of dielectric grease on the halves of the connector to make connecting/disconnecting easier and to eliminate any chance of corrosion in case moisture somehow manages to make its way in. So far this tender has kept my motorcycle battery topped up and ready to go. The motorcycle starts instantly every time, even if I leave it sitting for a week or more. The real test will come this winter, but for now I'm satisfied. I'll update after a few more months.

I bought this to charge my winch battery, which is new. First I put it on a low battery I wasnt sure was good. After a couple of days it still wasnt charged. I used the winch and moved the charger to the winch battery and a day later it wasnt charged. I did the math it should of taken about 15 hours to charge the winch battery. I was about to call this thing junk. I let it go another day and the green light came on indiacting the battery was full charged, and it was. It is just SLOW. I put it on the questionably battery and after a couple more days it was fully charged and the battery is working great. I have recharged my winch battery several times and this is working slow but doing a good job. Exactly what I was looking for.

great little tender, works well!

Super efficient charger, it is very capable of maintaining your lithium batteries for motorcycle.

It does what I need it to do. It hits all the boxes for my needs. Good size and good quality.

Works as needed. Great price for a battery maintainer. Hope it lasts for a long time.

Carga bien y rápido las meterías de moti

Very good charger for Harley bikes. But life needs to be tested

Ładowarka działa prawidłowo, nie mam uwag, po naładowaniu baterii motocykl odpala od strzała, jestem zadowolony. Polecam.

Semplice da usare, fa egregiamente il suo lavoro

Ottimo prodotto