Nilight LED Light Bar 2PCS 60W 4 Inch Flood Spot Combo LED Work Light Pods Triple Row Work Driving Lamp with 12 ft Wiring Harness kit - 2 Leads

I bought these LED pod lights to use as ditch lights. My truck has red accents, so being able to get pod lights in red casings was awesome.These lights make a significant difference (improvement) for my peripheral view while riding trails. You can see in the pictures the difference between having the lights turned off and on. They light up the sides of the trail with both spot and flood lights.Although the wiring harness is very robust, this is where I have my only issue. The harness seems to be made for the lights to be used as fog lights, instead of ditch lights. The reason I say this is because the harness was too short to reach across the engine bay and connect to both lights. It was only short by about 8 inches (reaching across a midsized pickup) so I simply spliced in some extra wiring to make it work. This doesn't lower my overall rating though as I said I'm pretty sure the wiring harness was made to be used with fog lights.Overall these lights have been working great for me, were very easy to install, and are available in different color options. So I would highly recommend these to anyone interested in them, with the caveat that small adjustments might need to be made to the wiring harness based on placement.

I bought these lights to install onto my Bad Boy Magnum MX zero-turn mower. The included wiring harness with switch and relay was a big plus and reduced installation time. I ended up not using the included switch, as it didn’t fit the hole I wanted to use. To mount the lights, I went on Etsy and bought heavy duty front wheel spindle mount adapters. They basically clamp onto the spindle housing and then provide a 3/8 hole for the mounting stud on these lights. There were no mounting instructions, but it was pretty easy to figure out.On the wiring harness, pay attention to the spade connectors. Some of them were not crimped tightly requiring me to crimp them down some more.Installation was completed and the lights are bright and crisp. I was able to cut some grass during darkness as the led lights guide the way forward.Would recommend, it seemed like a good value compared to “factory” brand led light kits costing over $120.

I got these to put on my 2016 John Deere X590 tractor, mostly for blowing snow in the winter. They were pretty simple to install, and the long wire harness and switch are more than long enough for the tractor. I did add a couple of disconnects so I can change or dismount things easily later. They, and the the mounts that clamp to the top bar of the brush guard are also Nilight products. As usual, I went over the top with solder type connectors and heat shrink tubing, but I'm sure I could have installed the Nilight kit by itself just fine.The light are very bright and great for my needs. They seem like a really good value at this price, too.

I bought the 60 watt LED light cubes along with the wiring harness.The wiring harness- Pros: very good quality terminals, wire, and the plastic surrounding the wire is very thick and durable. The rocker switch included works wonderful, and snapped right into the hole in my dash I drilled.Cons: One of the light wires were way too short, by about 2 feet. The switch wire was about 12 inches too short. I installed them as ditch lights on a 2013 Chevy 1500, but I think they would be too short for even the average car/suv. I had to extend the harness with my own wire, luckily I had plenty.The lights themselves-Pros: Very wide angle, mounting wasn’t terribly difficult, seem very sturdy and durable, wiring hooked to the lights was enclosed in a thick, durable plastic.Cons: Do not have much depth, can not angle them upwards at all due to the way that they are designed. Some people might think they look “bulky” although I do not.Overall, it’s not a bad buy for how much they cost. I am very satisfied with my purchase, as I was not expecting them to shine to the next county over. If you want that, go spend 200 bucks on some KC lights. For 30 bucks all together, you can’t beat this deal.Personally, I think this would be perfect for mounting to tractors, lawnmowers, or even for work lights on the back of a service truck.

The Nilight LED Light Bar 2PCS 60W 4 Inch is an excellent choice for anyone in need of powerful, reliable, and compact off-road lighting. These lights provide impressive brightness, delivering a wide, clear beam that significantly improves visibility during night driving or off-roading.With 60W of total power across two light bars, they produce a strong and focused light output that cuts through darkness and harsh weather conditions. The 4-inch size is perfect for mounting on vehicles like trucks, ATVs, or boats, and the sleek design ensures a perfect fit without looking bulky.Durability is another highlight of this LED light bar. Built to withstand tough conditions, it is IP67-rated for water and dust resistance, making it perfect for outdoor adventures in all weather. The aluminum housing ensures efficient heat dissipation, allowing the lights to run cool and last longer without issues.Installation is straightforward with included mounting hardware, and the light bars are designed to be shock-resistant, adding to their reliability for off-road trips. Whether you're looking to improve your vehicle’s visibility or simply add a rugged, stylish touch, the Nilight LED Light Bar is a fantastic option.

As a new overlander I want things in a tight budget. These light are bright and easy to install. A couple of very very small disappointments one was that you have to buy mounting brackets separately. But for the price I can’t really complain it was a bargain. The other when I was installing them I noticed the the brand name was only on one side of the light. Again a small thing but it would have been night to have the brand name on both the outsides. When installed one is on the inside and can’t bee seen from the side of the truck and the other side you can. But overall as a budget friendly light I’d buy it again.